Nombre de jours d'expédition |
|
---|
?* À propos du délai d'expédition
Système d'anneaux de compression double en acier inoxydable V-Lok (demi-raccord)
FUJIKIN
Stainless steel products manufactured by Fujikin Inc., a company known for superior results where top quality high pressure fittings are called for -, Dual compression ring method -, V-Lok (Half union).
· Material: Stainless steel
· Applicable fluids: Water, air, steam
· Applicable pipe material: Stainless steel.
à partir de∗ : | 8.71 € |
---|---|
Délai d'expédition minimum : | Jour même |
*Prix unitaire/configuration de base
Bouchon d'évent femelle pour raccord à virole double en acier inoxydable SUS316
SANKOMS
[Features]
· Double ferrule type supports a tube with two ferrules, a front ferrule and a back ferrule, and its structure retains high airtightness in a wide range from high pressure to vacuum.
· Product is compatible with tubes and pipes of various standards: Compatible millimeter sizes include φ2 mm - φ25 mm while compatible inch sizes include φ1/16inch - φ1inch, and compatible copper pipe sizes are 6A - 15A.
· The material used is SUS316.
· Max operating pressure is 25.5MPa and the operating temperature range is -196 - 360°C.
· Note that this range varies depending on the type of tubing used
à partir de∗ : | 50.19 € |
---|---|
Délai d'expédition minimum : | 39 jours |
*Prix unitaire/configuration de base
à partir de∗ : | 9.35 € |
---|---|
Délai d'expédition minimum : | Jour même |
*Prix unitaire/configuration de base
Pour raccord mécanique T de tuyauterie en acier inoxydable
HITACHI KINZOKU
Mechanical type tube fitting developed for stainless steel pipes. Highly reliable fitting with superb corrosion resistance and heat resistance, which leverages the special characteristics of lightweight and strong stainless steel piping.
[Features]
· Zlok® is a mechanical pipe fitting that has been developed for stainless steel piping.
· Highly reliable fitting benefits from the lightweight and strong characteristics of stainless steel pipes, and has superior corrosion and heat resistance properties.
· Packing features stable long-term sealing properties due to a structure which includes appropriate pressure applied to the surface.
· A fluorine rubber material with superior durability, heat resistance, and resistance against aqueous chlorine that satisfies leaching standards when it is used as a water supply device is used in the packing.
· Because the connector between the pipe and the fitting has a tapered surface and is tightened using a nut, a strong connecting force is achieved via the so-called wedge effect.
· Packing does not have to be removed from the fitting while laying pipe.
· Furthermore, because piping cannot be performed unless pipe ends are expanded, pipes do not fall out.
· Loose pipes can be found easily using a unique indicator that distinguishes between hand tightened and fully tightened pipes.
· When final tightening is neglected, water will leak from fittings during water pressure tests, thus allowing loose pipes to be detected.
· Expanded pipes can be corrected easily using an automated device after pipe setting.
· Pipes can easily be held and secured as the connector between the pipe and the fitting is not prone to wobbling.
à partir de∗ : | 20.43 € |
---|---|
Délai d'expédition minimum : | 6 jours |
*Prix unitaire/configuration de base
à partir de∗ : | 10.10 € |
---|---|
Délai d'expédition minimum : | Jour même |
*Prix unitaire/configuration de base
Raccords de tuyaux en acier inoxydable - Coude, 90°, extrémité filetée, raccord union
MISUMI
à partir de∗ : | 14.35 € |
---|---|
Délai d'expédition minimum : | Jour même |
*Prix unitaire/configuration de base
Acier inoxydable SUS316 IN Inserts
FUJI SPECIAL
Precision designed to withstand high pressure, shock, vibration, vacuum pressure, and temperature fluctuations. The pipe uses an ideal double ferrule method so there is no torsion
Délai d'expédition minimum : | 4 jours |
---|
à partir de∗ : | 12.86 € |
---|---|
Délai d'expédition minimum : | Jour même |
*Prix unitaire/configuration de base
à partir de∗ : | 17.75 € |
---|---|
Délai d'expédition minimum : | 3 jours |
*Prix unitaire/configuration de base
à partir de∗ : | 5.74 € |
---|---|
Délai d'expédition minimum : | Jour même |
*Prix unitaire/configuration de base
à partir de∗ : | 13.93 € |
---|---|
Délai d'expédition minimum : | Jour même |
*Prix unitaire/configuration de base
Pour raccord mécanique de tuyauterie en acier inoxydable, coude à 45°
HITACHI KINZOKU
A mechanical tube fitting developed for stainless steel pipes. Highly reliable, it takes advantage of stainless steel's strength and light weight to provide superb corrosion and heat resistance.
à partir de∗ : | 14.64 € |
---|---|
Délai d'expédition minimum : | 6 jours |
*Prix unitaire/configuration de base
Pour douille de raccord mécanique coudé de tuyauterie en acier inoxydable
HITACHI KINZOKU
Mechanical type tube fitting developed for stainless steel pipes. A highly reliable fitting with superb corrosion resistance and heat resistance, which optimizes the special characteristics of lightweight and strong stainless steel piping.
[Features]
· Zlok® is a mechanical pipe fitting that has been developed for stainless steel piping.
· Highly reliable fitting benefits from the light and strong characteristics of stainless steel pipes, and has superior corrosion and heat resistance properties.
· The packing has stable long-term sealing properties due to a structure with appropriate pressure applied to the surface.
· A fluorine rubber material with superior durability, heat resistance, and resistance against aqueous chlorine that satisfies leaching standards when used as a water supply device is used in the packing.
· Because the connector between the pipe and the fitting has a tapered surface and is tightened using a nut, a strong connecting force is achieved by the so-called wedge effect.
· The packing does not have to be removed from the fitting while laying pipe.
· Furthermore, because piping cannot be done unless pipe ends are expanded, pipes do not fall out.
· Loose pipes can be found easily using a unique indicator that distinguishes between hand tightened and fully tightened pipes.
· When final tightening is forgotten, water will leak from fittings during water pressure tests, thus allowing loose pipes to be detected.
· Expanded pipes can be corrected easily using an automatic machine after pipe setting.
· The pipe can easily be held and secured because the connector between the pipe and the fitting is not prone to wobbling.
à partir de∗ : | 10.42 € |
---|---|
Délai d'expédition minimum : | 6 jours |
*Prix unitaire/configuration de base
Pour raccord mécanique de tuyauterie en acier inoxydable, tuyau de raccordement court avec écrou
HITACHI KINZOKU
A mechanical type tube fitting that has been developed for stainless steel pipes. A highly reliable fitting with superb corrosion and heat resistance that utilizes the full properties of lightweight and strong stainless steel piping.
[Features]
· Zlok® is a mechanical pipe fitting that has been developed for stainless steel piping.
· This highly reliable fitting benefits from the lightweight and strong properties of stainless steel pipes with superior corrosion and heat resistance properties.
· The packing seal has stable sealing properties over the long term due to its structure applying the appropriate pressure to the surface.
· A fluororubber is used in the packing material. The fluororubber packing has superior durability, heat resistance, and resistance to aqueous chlorine, which satisfies leaching standards when it is used in water supply systems.
· The connector between the pipe and the fitting has a tapered surface that is tightened using a nut. Therefore, a strong connecting force is achieved by the so-called wedge effect.
· The packing does not have to be removed from the fitting when installing the piping.
· In addition, because the pipe ends must be expanded in order to complete the piping, this also prevents the pipes from falling out.
· Loose piping can be easily checked using a unique indicator that distinguishes between hand tightened and fully tightened pipes.
· If the final tightening has been forgotten, water will leak from fittings during water pressure tests, which enables any loose pipes to be detected.
· Expanded pipes can be simply corrected using an automatic machine after the pipes have been set.
· The connection between the pipe and the fitting is not prone to shaking. Therefore, the pipes can easily be held and secured.
à partir de∗ : | 11.51 € |
---|---|
Délai d'expédition minimum : | 6 jours |
*Prix unitaire/configuration de base
Joint mécanique pour tuyauterie en acier inoxydable, connexion union-isolation
HITACHI KINZOKU
A mechanical type tube fitting developed for stainless steel pipes. A highly reliable fitting with superb corrosion and heat resistance that makes full use of the special lightweight and strong characteristics of stainless steel piping.
[Features]
· Zlok® is a mechanical pipe fitting that has been developed for stainless steel piping.
· A highly reliable fitting with superb corrosion and heat resistance that makes full use of the special lightweight and strong characteristics of stainless steel piping.
· The packing has stable long term sealing properties due to its structure in which the appropriate pressure is applied to the surface.
· The packing is made using a fluorine rubber material with superior durability, heat resistance, and resistance against aqueous chlorine that satisfies leaching standards when it is used as a water supply device.
· Because the connector between the pipe and the fitting has a tapered surface and is tightened using a nut, a stronger connecting force is achieved via the "wedge effect".
· The packing does not have to be removed from the fitting while laying pipe.
· Furthermore, because piping cannot be done unless the pipe ends are expanded, the pipes do not fall out.
· Loose pipes can be found easily using a unique indicator that distinguishes between hand tightened and fully tightened pipes.
· If you have forgotten to perform the final tightening, liquids will leak from fittings during pressure tests, informing you that further tightening is required.
· Expanded pipes can be easily corrected after setting using the automatic device.
· The pipe can easily be supported and secured in place as the connecting part between the pipe and the fitting is not prone to wobbling.
à partir de∗ : | 36.58 € |
---|---|
Délai d'expédition minimum : | 6 jours |
*Prix unitaire/configuration de base
Pièce de raccordement MR II, raccords en T, T
RIKEN
Compression pipe fitting. Cap nut is tightened to crimp sleeve on pipe, creating a seal and preventing pipe slippage.
à partir de∗ : | 14.64 € |
---|---|
Délai d'expédition minimum : | 11 jours |
*Prix unitaire/configuration de base
Demi-raccord coudé SUS304 en acier inoxydable SE
FUJI SPECIAL
The Emerto type features a structure that is strong against impact and vibration and that completely seals high pressure liquids. The sleeve's cutting edge firmly fits onto the pipe.
[Features]
· The Emerto type features a structure that is strong against impact and vibration and that completely seals high pressure liquids. The sleeve's cutting edge firmly fits onto the pipe.
- Furthermore, piping can be completed via a simple procedure which requires only cutting the pipe and tightening of the nuts (screw machining, welding, flaring, etc. not required), so fewer man-hours are required for piping while the product is made more compact and lighter, providing an economical piping joint solution.
à partir de∗ : | 22.50 € |
---|---|
Délai d'expédition minimum : | 4 jours |
*Prix unitaire/configuration de base
Pour demi-raccord SK SUS304 en acier inoxydable
FUJI SPECIAL
[Features]
· Adopts a strong structure against shock and vibration by completely sealing high pressure fluid with the Ermeto type in which the cutting edge of the sleeve firmly bites into a pipe.
· The tube fittings are economic because the equipment required is compact and lightweight and laborious piping is now easy due to simplified tasks (screw points, welds, flare).
à partir de∗ : | 16.20 € |
---|---|
Délai d'expédition minimum : | Jour même |
*Prix unitaire/configuration de base
Acier inoxydable SUS304 Raccord union évasé SY
FUJI SPECIAL
The Ermeto-type connector's sleeve cutting edge bites firmly into the pipe. Strong, shock and vibration-proof, and fully seals pressurized fluid.
à partir de∗ : | 19.09 € |
---|---|
Délai d'expédition minimum : | 5 jours |
*Prix unitaire/configuration de base
Raccord évasé SYP pour cloison SUS304 en acier inoxydable
FUJI SPECIAL
Adopts a strong structure against shock and vibration with completely sealing high pressure fluid by the Ermeto type in which the cutting edge of a sleeve firmly bit to a pipe.
Délai d'expédition minimum : | 5 jours |
---|
Acier inoxydable SUS316 MC Demi-raccord coudé
FUJI SPECIAL
Precision designed to withstand high pressure, shock, vibration, vacuum pressure, and temperature fluctuations. The pipe uses an ideal double ferrule method to eliminate torsion.
Délai d'expédition minimum : | Jour même |
---|
Acier inoxydable SUS316 ME Demi-raccord coudé
FUJI SPECIAL
Precision designed to withstand high pressure, shock, vibration, vacuum pressure, and temperature fluctuations. The pipe uses an ideal double ferrule method to ensure there is no torsion.
Délai d'expédition minimum : | 4 jours |
---|
Raccords en T en acier inoxydable SUS316 MRT (mâles)
FUJI SPECIAL
Precision designed to withstand high pressure, shock, vibration, vacuum pressure, and temperature fluctuations. The pipe uses an ideal double ferrule method so there is no torsion
Délai d'expédition minimum : | 5 jours |
---|
Raccord union évasé SUS316 U en acier inoxydable
FUJI SPECIAL
Precision designed to withstand high pressure, shock, vibration, vacuum pressure, and temperature fluctuations. The pipe uses an ideal double ferrule method so there is no torsion
à partir de∗ : | 23.14 € |
---|---|
Délai d'expédition minimum : | 4 jours |
*Prix unitaire/configuration de base
Raccord en T à double pression avec fonction de sécurité, pour tuyaux en acier inoxydable
BENKAN
With safety sealant.
à partir de∗ : | 17.80 € |
---|---|
Délai d'expédition minimum : | 6 jours |
*Prix unitaire/configuration de base
BENKAN
A pipe-expanding joint with proven performance across many years of plant use.
à partir de∗ : | 17.34 € |
---|---|
Délai d'expédition minimum : | 6 jours |
*Prix unitaire/configuration de base
BENKAN
[Features]
• Single-touch fitting by just inserting the pipe in the correct position.
à partir de∗ : | 22.95 € |
---|---|
Délai d'expédition minimum : | 6 jours |
*Prix unitaire/configuration de base
FUJIKIN
Due to flareless design, connection is possible by simply inserting a tube and tightening the nut. No special flare tools or flame required.
à partir de∗ : | 45.99 € |
---|---|
Délai d'expédition minimum : | 50 jours |
*Prix unitaire/configuration de base
FUJIKIN
The flareless type can be connected only by inserting a tube and tightening the nut without requiring special flare tools or fire.
à partir de∗ : | 13.90 € |
---|---|
Délai d'expédition minimum : | 11 jours |
*Prix unitaire/configuration de base
FUJIKIN
The flareless type can be connected only by inserting a tube and tightening the nut without requiring special flare tools or fire.
à partir de∗ : | 29.97 € |
---|---|
Délai d'expédition minimum : | 6 jours |
*Prix unitaire/configuration de base
à partir de∗ : | 21.64 € |
---|---|
Délai d'expédition minimum : | 5 jours |
*Prix unitaire/configuration de base
à partir de∗ : | 21.70 € |
---|---|
Délai d'expédition minimum : | 11 jours |
*Prix unitaire/configuration de base
Connecteur de tube chromatographe (écrou mâle)
FUJIKIN
Tube connectors for chromatographs manufactured by Fujikin Inc., a company known for superior results where top quality high pressure fittings are called for - (Male nut).
· Material: Stainless steel
· Applicable fluids: Water, air, steam
· Applicable pipe material: Stainless steel.
à partir de∗ : | 9.00 € |
---|---|
Délai d'expédition minimum : | 11 jours |
*Prix unitaire/configuration de base
Connecteur mâle pour raccord à virole double en acier inoxydable SUS316 (type à souder)
SANKOMS
[Features]
· Double-ferrule type supports a tube with two ferrules – the front ferrule and back ferrule – and its structure retains high airtightness in a wide range of environments from high pressure to vacuum.
· This product is compatible with tubes and pipes of various standards: The compatible diameters are 2–25 mm (1/16–1 inch), and the compatible steel pipe sizes are 6A to 15A.
· Material: SUS316.
· Max operating pressure is 25.5 MPa.
· The operating temperature range is -196° to 360°C (note that this varies based on the tube used).
à partir de∗ : | 20.04 € |
---|---|
Délai d'expédition minimum : | 39 jours |
*Prix unitaire/configuration de base
à partir de∗ : | 21.37 € |
---|---|
Délai d'expédition minimum : | Jour même |
*Prix unitaire/configuration de base
à partir de∗ : | 32.85 € |
---|---|
Délai d'expédition minimum : | Jour même |
*Prix unitaire/configuration de base
à partir de∗ : | 5.85 € |
---|---|
Délai d'expédition minimum : | 3 jours |
*Prix unitaire/configuration de base
à partir de∗ : | 9.14 € |
---|---|
Délai d'expédition minimum : | 3 jours |
*Prix unitaire/configuration de base
à partir de∗ : | 5.21 € |
---|---|
Délai d'expédition minimum : | 1 jour |
*Prix unitaire/configuration de base
Raccords de tuyaux en acier inoxydable - Raccord union en T, raccordement fileté
MISUMI
à partir de∗ : | 31.78 € |
---|---|
Délai d'expédition minimum : | Jour même |
*Prix unitaire/configuration de base
Raccords de tuyaux en acier inoxydable - Raccord union en T pour séparation
MISUMI
à partir de∗ : | 26.47 € |
---|---|
Délai d'expédition minimum : | 3 jours |
*Prix unitaire/configuration de base
Pour raccord mécanique coudé de tuyauterie en acier inoxydable
HITACHI KINZOKU
A mechanical type tube fitting developed for stainless steel pipes. A highly reliable fitting with superb corrosion and heat resistance that makes full use of the special lightweight and strong characteristics of stainless steel piping.
[Features]
· Zlok® is a mechanical pipe fitting that has been developed for stainless steel piping.
· A highly reliable fitting with superb corrosion and heat resistance that makes full use of the special lightweight and strong characteristics of stainless steel piping.
· The packing has stable long term sealing properties due to its structure in which the appropriate pressure is applied to the surface.
· The packing is made using a fluorine rubber material with superior durability, heat resistance, and resistance against aqueous chlorine that satisfies leaching standards when it is used as a water supply device.
· Because the connector between the pipe and the fitting has a tapered surface and is tightened using a nut, a stronger connecting force is achieved via the "wedge effect".
· The packing does not have to be removed from the fitting while laying pipe.
· Furthermore, because piping cannot be done unless the pipe ends are expanded, the pipes do not fall out.
· Loose pipes can be found easily using a unique indicator that distinguishes between hand tightened and fully tightened pipes.
· If you have forgotten to perform the final tightening, liquids will leak from fittings during pressure tests, informing you that further tightening is required.
· Expanded pipes can be easily corrected after setting using the automatic device.
· The pipe can easily be supported and secured in place as the connecting part between the pipe and the fitting is not prone to wobbling.
à partir de∗ : | 11.33 € |
---|---|
Délai d'expédition minimum : | 6 jours |
*Prix unitaire/configuration de base
Joint mécanique pour tuyauterie en acier inoxydable
HITACHI KINZOKU
Mechanical type tube fitting developed for stainless steel pipes. Highly reliable fitting with superb corrosion resistance and heat resistance, which leverages the special characteristics of lightweight and strong stainless steel piping.
[Features]
· Zlok® is a mechanical pipe fitting that has been developed for stainless steel piping.
· Highly reliable fitting benefits from the lightweight and strong characteristics of stainless steel pipes, and has superior corrosion and heat resistance properties.
· Packing features stable long-term sealing properties due to a structure which includes appropriate pressure applied to the surface.
· A fluorine rubber material with superior durability, heat resistance, and resistance against aqueous chlorine that satisfies leaching standards when it is used as a water supply device is used in the packing.
· Because the connector between the pipe and the fitting has a tapered surface and is tightened using a nut, a strong connecting force is achieved via the so-called wedge effect.
· Packing does not have to be removed from the fitting while laying pipe.
· Furthermore, because piping cannot be performed unless pipe ends are expanded, pipes do not fall out.
· Loose pipes can be found easily using a unique indicator that distinguishes between hand tightened and fully tightened pipes.
· When final tightening is neglected, water will leak from fittings during water pressure tests, thus allowing loose pipes to be detected.
· Expanded pipes can be corrected easily using an automated device after pipe setting.
· Pipes can easily be held and secured as the connector between the pipe and the fitting is not prone to wobbling.
à partir de∗ : | 5.39 € |
---|---|
Délai d'expédition minimum : | 6 jours |
*Prix unitaire/configuration de base
Pour raccord mécanique de tuyauterie en acier inoxydable, coude à filetage mâle
HITACHI KINZOKU
Mechanical type tube fitting developed for stainless steel pipes. A highly reliable fitting with superb corrosion resistance and heat resistance, which optimizes the special characteristics of lightweight and strong stainless steel piping.
[Features]
· Zlok® is a mechanical pipe fitting that has been developed for stainless steel piping.
· Highly reliable fitting benefits from the light and strong characteristics of stainless steel pipes, and has superior corrosion and heat resistance properties.
· The packing has stable long-term sealing properties due to a structure with appropriate pressure applied to the surface.
· A fluorine rubber material with superior durability, heat resistance, and resistance against aqueous chlorine that satisfies leaching standards when used as a water supply device is used in the packing.
· Because the connector between the pipe and the fitting has a tapered surface and is tightened using a nut, a strong connecting force is achieved by the so-called wedge effect.
· The packing does not have to be removed from the fitting while laying pipe.
· Furthermore, because piping cannot be done unless pipe ends are expanded, pipes do not fall out.
· Loose pipes can be found easily using a unique indicator that distinguishes between hand tightened and fully tightened pipes.
· When final tightening is forgotten, water will leak from fittings during water pressure tests, thus allowing loose pipes to be detected.
· Expanded pipes can be corrected easily using an automatic machine after pipe setting.
· The pipe can easily be held and secured because the connector between the pipe and the fitting is not prone to wobbling.
à partir de∗ : | 19.68 € |
---|---|
Délai d'expédition minimum : | 6 jours |
*Prix unitaire/configuration de base
Pour douille de raccord mécanique coudé de tuyauterie en acier inoxydable
HITACHI KINZOKU
Mechanical type tube fitting developed for stainless steel pipes. Highly reliable fitting with superb corrosion resistance and heat resistance, which leverages the special characteristics of lightweight and strong stainless steel piping.
[Features]
· Zlok® is a mechanical pipe fitting that has been developed for stainless steel piping.
· Highly reliable fitting benefits from the lightweight and strong characteristics of stainless steel pipes, and has superior corrosion and heat resistance properties.
· Packing features stable long-term sealing properties due to a structure which includes appropriate pressure applied to the surface.
· A fluorine rubber material with superior durability, heat resistance, and resistance against aqueous chlorine that satisfies leaching standards when it is used as a water supply device is used in the packing.
· Because the connector between the pipe and the fitting has a tapered surface and is tightened using a nut, a strong connecting force is achieved via the so-called wedge effect.
· Packing does not have to be removed from the fitting while laying pipe.
· Furthermore, because piping cannot be performed unless pipe ends are expanded, pipes do not fall out.
· Loose pipes can be found easily using a unique indicator that distinguishes between hand tightened and fully tightened pipes.
· When final tightening is neglected, water will leak from fittings during water pressure tests, thus allowing loose pipes to be detected.
· Expanded pipes can be corrected easily using an automated device after pipe setting.
· Pipes can easily be held and secured as the connector between the pipe and the fitting is not prone to wobbling.
à partir de∗ : | 18.69 € |
---|---|
Délai d'expédition minimum : | 6 jours |
*Prix unitaire/configuration de base
Marque |
---|
Série du produit |
CAD |
à partir de∗ |
Délai d'expédition minimum |
Type |
Type de composant associé |
Matériau |
Fluide applicable |
Type de connexion |
Type de connexion - Diamètre identique du tube |
Type de connexion - Diamètre différent du tube |
Type de connexion - Filetage, sens du tube |
Type de connexion - Filetage, raccord de tube |
Matériau du tuyau applicable |
Diam. extérieur du tuyau applicable D (D1)(Ø) |
Diam. extérieur du tuyau applicable D2(Ø) |
Type à filetage de connexion |
Filetage nominal |
Pression de service max.(MPa) |
Traitement de surface |
Marque | FUJIKIN | SANKOMS | MISUMI | HITACHI KINZOKU | MISUMI | MISUMI | FUJI SPECIAL | MISUMI | MISUMI | MISUMI | MISUMI | HITACHI KINZOKU | HITACHI KINZOKU | HITACHI KINZOKU | HITACHI KINZOKU | RIKEN | FUJI SPECIAL | FUJI SPECIAL | FUJI SPECIAL | FUJI SPECIAL | FUJI SPECIAL | FUJI SPECIAL | FUJI SPECIAL | FUJI SPECIAL | BENKAN | BENKAN | BENKAN | FUJIKIN | FUJIKIN | FUJIKIN | FUJIKIN | FUJIKIN | FUJIKIN | SANKOMS | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | HITACHI KINZOKU | HITACHI KINZOKU | HITACHI KINZOKU | HITACHI KINZOKU |
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Série du produit | Système d'anneaux de compression double en acier inoxydable V-Lok (demi-raccord) | Bouchon d'évent femelle pour raccord à virole double en acier inoxydable SUS316 | Raccords de tuyaux en acier inoxydable - Raccord union fileté | Raccords de tuyaux en acier inoxydable - Coude, 90°, extrémité filetée, raccord union | Raccords de tuyaux en acier inoxydable - Raccord union à épaulement | Raccords de tuyaux en acier inoxydable - Raccord union de diamètre taraudé | Pour raccord mécanique de tuyauterie en acier inoxydable, coude à 45° | Pour douille de raccord mécanique coudé de tuyauterie en acier inoxydable | Pour raccord mécanique de tuyauterie en acier inoxydable, tuyau de raccordement court avec écrou | Joint mécanique pour tuyauterie en acier inoxydable, connexion union-isolation | Raccord en T à double pression avec fonction de sécurité, pour tuyaux en acier inoxydable | Système d'anneaux de compression double en acier inoxydable V-Lok (raccord sur plaque) | Système d'anneaux de compression double en acier inoxydable V-Lok (raccord de manomètre sur plaque) | Connecteur mâle pour raccord à virole double en acier inoxydable SUS316 (type à souder) | Raccords de tuyaux en acier inoxydable - Raccord union coudé, 90° | Raccords de tuyaux en acier inoxydable - Connecteur de ports | Raccords de tuyaux en acier inoxydable - Raccord union en T, raccordement fileté | Raccords de tuyaux en acier inoxydable - Raccord union en T pour séparation | Pour raccord mécanique coudé de tuyauterie en acier inoxydable | Pour raccord mécanique de tuyauterie en acier inoxydable, coude à filetage mâle | Pour douille de raccord mécanique coudé de tuyauterie en acier inoxydable | ||||||||||||||||||||||||
CAD |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| ||||||||||||||||||||||
à partir de∗ | 8.71 € *Prix unitaire/configuration de base Remise sur volume | 50.19 € *Prix unitaire/configuration de base Remise sur volume | 9.35 € *Prix unitaire/configuration de base Remise sur volume | 20.43 € *Prix unitaire/configuration de base | 10.10 € *Prix unitaire/configuration de base Remise sur volume | 14.35 € *Prix unitaire/configuration de base Remise sur volume | - | 12.86 € *Prix unitaire/configuration de base Remise sur volume | 17.75 € *Prix unitaire/configuration de base Remise sur volume | 5.74 € *Prix unitaire/configuration de base Remise sur volume | 13.93 € *Prix unitaire/configuration de base Remise sur volume | 14.64 € *Prix unitaire/configuration de base | 10.42 € *Prix unitaire/configuration de base | 11.51 € *Prix unitaire/configuration de base | 36.58 € *Prix unitaire/configuration de base | 14.64 € *Prix unitaire/configuration de base Remise sur volume | 22.50 € *Prix unitaire/configuration de base | 16.20 € *Prix unitaire/configuration de base Remise sur volume | 19.09 € *Prix unitaire/configuration de base | - | - Remise sur volume | - | - | 23.14 € *Prix unitaire/configuration de base | 17.80 € *Prix unitaire/configuration de base Remise sur volume | 17.34 € *Prix unitaire/configuration de base Remise sur volume | 22.95 € *Prix unitaire/configuration de base Remise sur volume | 45.99 € *Prix unitaire/configuration de base | 13.90 € *Prix unitaire/configuration de base | 29.97 € *Prix unitaire/configuration de base | 21.64 € *Prix unitaire/configuration de base | 21.70 € *Prix unitaire/configuration de base | 9.00 € *Prix unitaire/configuration de base | 20.04 € *Prix unitaire/configuration de base Remise sur volume | 21.37 € *Prix unitaire/configuration de base Remise sur volume | 32.85 € *Prix unitaire/configuration de base Remise sur volume | 5.85 € *Prix unitaire/configuration de base Remise sur volume | 9.14 € *Prix unitaire/configuration de base Remise sur volume | 5.21 € *Prix unitaire/configuration de base Remise sur volume | 31.78 € *Prix unitaire/configuration de base Remise sur volume | 26.47 € *Prix unitaire/configuration de base Remise sur volume | 11.33 € *Prix unitaire/configuration de base | 5.39 € *Prix unitaire/configuration de base | 19.68 € *Prix unitaire/configuration de base | 18.69 € *Prix unitaire/configuration de base |
Délai d'expédition minimum | Jour même | 39 jours | Jour même | 6 jours | Jour même | Jour même | 4 jours | Jour même | 3 jours | Jour même | Jour même | 6 jours | 6 jours | 6 jours | 6 jours | 11 jours | 4 jours | Jour même | 5 jours | 5 jours | Jour même | 4 jours | 5 jours | 4 jours | 6 jours | 6 jours | 6 jours | 50 jours | 11 jours | 6 jours | 5 jours | 11 jours | 11 jours | 39 jours | Jour même | Jour même | 3 jours | 3 jours | 1 jour | Jour même | 3 jours | 6 jours | 6 jours | 6 jours | 6 jours |
Type | Raccord | Composants associés | Composants associés | Raccord | Raccord | Raccord | Composants associés | Raccord | Raccord | Composants associés | Raccord | Raccord | Raccord | Composants associés | Raccord | Raccord | Raccord | Raccord | Raccord | Raccord | Raccord | Raccord | Raccord | Raccord | Raccord | Raccord | Raccord | Raccord | Raccord | Raccord | Raccord | Raccord | Composants associés | Raccord | Raccord | Raccord | Composants associés | Raccord | Composants associés | Raccord | Raccord | Raccord | Raccord | Raccord | Composants associés |
Type de composant associé | - | - | Adaptateurs / connecteurs de tube | - | - | - | Insert | - | - | Insert | - | - | - | Adaptateurs / connecteurs de tube | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | Écrous | - | - | - | Adaptateurs / connecteurs de tube | - | Virole, manchon | - | - | - | - | - | Adaptateurs / connecteurs de tube |
Matériau | Acier inoxydable | Acier inoxydable | Acier inoxydable | Acier inoxydable | Acier inoxydable | Acier inoxydable | Acier inoxydable | Acier inoxydable | Acier inoxydable | Acier inoxydable | Acier inoxydable | Acier inoxydable | Acier inoxydable | Acier inoxydable | Acier inoxydable | Bronze | Acier inoxydable | Acier inoxydable | Acier inoxydable | Acier inoxydable | Acier inoxydable | Acier inoxydable | Acier inoxydable | Acier inoxydable | Acier inoxydable | Acier inoxydable | Acier inoxydable | Acier inoxydable | Acier inoxydable | Acier inoxydable | Acier inoxydable | Acier inoxydable | Acier inoxydable | Acier inoxydable | Acier inoxydable | Acier inoxydable | Acier inoxydable | Acier inoxydable | Acier inoxydable | Acier inoxydable | Acier inoxydable | Acier inoxydable | Acier inoxydable | Acier inoxydable | Acier inoxydable |
Fluide applicable | Eau / Air / Vapeur | Eau / Air / Huile | Eau / Air / Huile | Eau | Eau / Air / Huile | Eau / Air / Huile | Eau / Air / Gaz / Huile | Eau / Air / Huile | Eau / Air / Huile | Eau / Air / Huile | Eau / Air / Huile | Eau | Eau | Eau | Eau | Eau | Eau / Air / Huile | Eau / Air / Huile | Eau / Air / Huile | Eau / Air / Huile | Eau / Air / Gaz / Huile | Eau / Air / Gaz / Huile | Eau / Air / Gaz / Huile | Eau / Air / Gaz / Huile | Eau / Air / Produit chimique / Huile | Eau / Air / Produit chimique / Huile | Eau / Air / Produit chimique / Huile | Eau / Air / Vapeur / Gaz / Produit chimique / Huile | Eau / Air / Vapeur / Gaz / Produit chimique / Huile | Eau / Air / Vapeur / Gaz / Produit chimique / Huile | Eau / Air / Vapeur | Eau / Air / Vapeur | Eau / Air / Vapeur | Eau / Air / Huile | Eau / Air / Huile | Eau / Air / Huile | Eau / Air / Huile | Eau / Air / Huile | Eau / Air / Huile | Eau / Air / Huile | Eau / Air / Huile | Eau | Eau | Eau | Eau |
Type de connexion | Filetage <-> Tube, sens | - | - | Tuyau <-> Tuyau, diam. identique / Tuyau <-> Tuyau, diam. différent | Filetage <-> Tube, sens | Filetage <-> Tube, sens | - | Tuyau <-> Tuyau, diam. identique | Tuyau <-> Tuyau, diam. différent | - | Filetage <-> Tube, sens | Tuyau <-> Tuyau, diam. identique | Tuyau <-> Tuyau, diam. identique / Tuyau <-> Tuyau, diam. différent | - | Filetage <-> Tube, sens | Tuyau <-> Tuyau, diam. identique | Filetage <-> Tube, sens | Filetage <-> Tube, sens | Tuyau <-> Tuyau, diam. identique | Tuyau <-> Tuyau, diam. identique | Filetage <-> Tube, sens | Filetage <-> Tube, sens | Filetage <-> Tube, raccordement | Tuyau <-> Tuyau, diam. identique | Tuyau <-> Tuyau, diam. identique / Tuyau <-> Tuyau, diam. différent | Filetage <-> Tube, sens | Autres | Filetage <-> Tube, raccordement | Filetage <-> Tube, sens | Tuyau <-> Tuyau, diam. identique | Tuyau <-> Tuyau, diam. identique | Filetage <-> Tube, sens | - | Filetage <-> Tube, sens | Tuyau <-> Tuyau, diam. identique | Tuyau <-> Tuyau, diam. identique | - | Autres | - | Filetage <-> Tube, raccordement | Tuyau <-> Tuyau, diam. identique | Tuyau <-> Tuyau, diam. identique | Autres | Filetage <-> Tube, sens | - |
Type de connexion - Diamètre identique du tube | - | - | - | Raccords-unions en T | - | - | - | Raccord-union droit | - | - | - | Raccords union coudés | Raccord-union droit | - | - | Raccords-unions en T | - | - | Raccord-union droit | Raccords union de séparation | - | - | - | Raccord-union droit | - | - | - | - | - | Raccord-union droit | Raccords union de séparation | - | - | - | Raccords union coudés | Raccords-unions en T | - | - | - | - | Raccords union de séparation | Raccords union coudés | - | - | - |
Type de connexion - Diamètre différent du tube | - | - | - | T | - | - | - | - | Raccord-union droit | - | - | - | Raccord-union droit | - | - | - | - | - | - | - | - | - | - | - | T | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
Type de connexion - Filetage, sens du tube | Mâle droit | - | - | - | - | - | - | - | - | - | - | - | - | - | Raccord-union droit | - | Coude à 90° | Raccord-union droit | - | - | Raccord-union droit | Coude à 90° | - | - | - | Coude à 90° | - | - | Mâle droit | - | - | Raccord union de cloison droit | - | Raccord-union droit | - | - | - | - | - | - | - | - | - | Coude à 90° | - |
Type de connexion - Filetage, raccord de tube | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | Raccord en T mâle | - | - | - | - | Raccord en T femelle | - | - | - | - | - | - | - | - | - | - | - | T de piquage mâle | - | - | - | - | - |
Matériau du tuyau applicable | Acier inoxydable | - | Acier inoxydable | Acier inoxydable | Acier inoxydable | Acier inoxydable | Acier inoxydable | Acier inoxydable | Acier inoxydable | Acier inoxydable | Acier inoxydable | Acier inoxydable | Acier inoxydable | Acier inoxydable | Acier inoxydable | Cuivre / Acier inoxydable | Acier inoxydable | Acier inoxydable | Acier inoxydable | Acier inoxydable | Acier inoxydable | Acier inoxydable | Acier inoxydable | Acier inoxydable | Acier inoxydable | Acier inoxydable | Acier inoxydable | Acier inoxydable | Acier inoxydable | Acier inoxydable | Acier inoxydable | Acier inoxydable | Acier inoxydable | Acier inoxydable / Polyéthylène | Acier inoxydable | Acier inoxydable | Acier inoxydable | Acier inoxydable | Acier inoxydable | Acier inoxydable | Acier inoxydable | Acier inoxydable | Acier inoxydable | Acier inoxydable | Acier inoxydable |
Diam. extérieur du tuyau applicable D (D1)(Ø) | 1.6 ~ 25.4 | - | 4 ~ 12 | 15.88 ~ 60.5 | 3.18 ~ 12.7 | 3.18 ~ 12.7 | 6 ~ 12.7 | 3.18 ~ 12.7 | 6 ~ 12.7 | 4 ~ 12 | 4 ~ 12 | 15.88 ~ 60.5 | 15.88 ~ 60.5 | 15.88 ~ 28.58 | 15.88 ~ 60.5 | 15.88 ~ 28.58 | 6 ~ 34 | 6 ~ 34 | 6 ~ 34 | 6 ~ 34 | 1.6 ~ 25.4 | 1.6 ~ 25.4 | 3 ~ 12.7 | 1.6 ~ 25.4 | - | - | - | 3 ~ 12.7 | 3 ~ 12.7 | 3 ~ 12.7 | 1.6 ~ 25.4 | 3.2 ~ 12.7 | - | 6 ~ 12.7 | 3.18 ~ 12.7 | 3.18 ~ 12.7 | 3.18 ~ 12.7 | 3.18 ~ 12.7 | 3.18 ~ 12.7 | 4 ~ 12 | 4 ~ 12 | 15.88 ~ 60.5 | 15.88 ~ 60.5 | 22.22 | 28.58 ~ 60.5 |
Diam. extérieur du tuyau applicable D2(Ø) | - | - | - | 15.88 ~ 48.6 | - | - | - | - | 3.18 ~ 10 | - | - | - | 15.88 ~ 48.6 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
Type à filetage de connexion | R / NPT / G / U | Rc | R | - | R | R | - | - | - | - | R | - | - | - | Rc | - | PT | PT | - | - | PT / NPT | PT / NPT | PT / NPT | - | - | R | - | Rc | R | - | - | Rc / NPT | - | - | - | - | - | - | - | R | - | - | - | R | Rc |
Filetage nominal | 1/2-20 / 3/4-16 / 3/8-24 / 5/16-24 / 7/8-14 / 7/16-20 / 9/16-18 / 11/16-12 / 15/16-12 / 1/8B / 1/4B / 3/8B / 1/2B / 3/4B / 1b | 1/8B / 1/4B / 3/8B / 1/2B | 1/8B / 1/4B / 3/8B | - | 1/8B / 1/4B / 3/8B / 1/2B | 1/8B / 1/4B / 3/8B / 1/2B | - | - | - | - | 1/8B / 1/4B / 3/8B | - | - | - | 1/2B / 3/4B / 1b / 1 1/4B / 1 1/2B / 2b / 2 1/2B | - | 1/8B / 1/4B / 3/8B / 1/2B / 3/4B / 1b | 1/8B / 1/4B / 3/8B / 1/2B / 3/4B / 1b | - | - | 1/16B / 1/8B / 1/4B / 3/8B / 1/2B / 3/4B / 1b | 1/16B / 1/8B / 1/4B / 3/8B / 1/2B / 3/4B / 1b | 1/8B / 1/4B / 3/8B / 1/2B | - | - | - | - | 1/8B / 1/4B / 3/8B | 1/8B / 1/4B / 3/8B / 1/2B | - | - | 1/8B / 1/4B / 1/2B | - | - | - | - | - | - | - | 1/8B / 1/4B / 3/8B | - | - | - | 1/2B / 3/4B | 1/2B / 3/4B / 1b / 1 1/4B |
Pression de service max.(MPa) | 32.4 ~ 83.2 | 25.5 | - | 1 | - | - | 25 ~ 41 | - | - | - | - | 1 | 1 | 1 | 1 | 1 | 21 | 21 | 21 | 21 | 10 ~ 41 | 10 ~ 41 | 25 ~ 41 | 10 ~ 41 | 2 | 2 | 2 | 30 ~ 69 | 30 ~ 69 | 30 ~ 69 | 32.4 ~ 83.2 | 45.1 ~ 75.5 | 83.2 | 25.5 | - | - | - | - | - | - | - | 1 | 1 | 1 | 1 |
Traitement de surface | Non fourni | Non fourni | Non fourni | Non fourni | Non fourni | Non fourni | Non fourni | Non fourni | Non fourni | Non fourni | Non fourni | Non fourni | Non fourni | Non fourni | Non fourni | Non fourni | Non fourni | Non fourni | Non fourni | Non fourni | Non fourni | Non fourni | Non fourni | Non fourni | Non fourni | Non fourni | Non fourni | Non fourni | Non fourni | Non fourni | Non fourni | Non fourni | Non fourni | Non fourni | Non fourni | Non fourni | Non fourni | Non fourni | Non fourni | Non fourni | Non fourni | Non fourni | Non fourni | Non fourni | Non fourni |
Loading...
La valeur ci-dessus s'applique à une connexion correctement établie entre le port P et le port A lorsqu'une pression négative est appliquée. Pour plus de détails, consultez les caractéristiques techniques fournies par le fabricant concerné.
Aidez-nous à améliorer notre site.
Donnez-nous votre avis sur le catalogue en ligne MISUMI.
Merci pour votre coopération.
Veuillez s'il vous plaît utiliser le formulaire si vous souhaitez obtenir une réponse rapide de notre part.