Raccords de tuyaux mécaniques / raccords flexibles

?* À propos du délai d'expédition

• 

  Flexible à poignée, type 316

  SHO-BOND COUPLING

  Lightweight and low cost mechanical pipe fitting with excellent corrosion resistance.
  
  [Features]
  · Low cost was achieved by simplifying the components while adopting SUS316, which is highly resistant to rust and other corrosion, for the main body (U bar structure is patented).
  · Compact and lighter than other fittings in spite of high performance.
  · Therefore, construction in narrow work spaces is easy.
  · Secondary processing such as threading and grooving is not required at all due to unique a structure that prevents pipe disconnection, thus enabling reductions in processing cost and working time.

  • Remise sur volume

  à partir de∗ ：	43.37 €
  Délai d'expédition minimum ：	3 jours

  *Prix unitaire/configuration de base

• 

  Raccords supérieurs, capuchon, F-4

  RIKEN

  There are two types of surface coating, primary rustproofing coating and molten zinc plating.

  • Remise sur volume

  à partir de∗ ：	10.10 €
  Délai d'expédition minimum ：	5 jours

  *Prix unitaire/configuration de base

• 

  MD, pièce de raccordement KD-II, grand coude en Y à 90°

  DAIDRE

  This steel drainage pipe flexible joint can be used by combining a common main body with a flange set suitable for the application.
  

  • Remise sur volume

  à partir de∗ ：	14.35 €
  Délai d'expédition minimum ：	7 jours

  *Prix unitaire/configuration de base

• 

  Douille SB type D - raccord de purge

  SHO-BOND COUPLING

  Fast and easy repairs to leakage from drainage fittings.
  [Compatible fittings] Screw-drainage pipe fittings (JIS B 2303) made of iron only. Drainage pipe fittings (by Daidore Co., Ltd., Hasegawa Foundry Co. Ltd.) * Cannot be used with 45°Y and 45° double Y types.

  à partir de∗ ：	69.74 €
  Délai d'expédition minimum ：	5 jours

  *Prix unitaire/configuration de base

• 

  pour raccords à usage général de type S à douille SB

  SHO-BOND COUPLING

  Leakages from the steel pipe screw fittings can be quickly and easily repaired.
  [Compatible Fittings]Screw-In Malleable Cast Iron Pipe Fittings [JIS B 2301] * Screw-in drainage pipe fitting (JIS B 2303) malleable cast iron fittings can be used.

  à partir de∗ ：	54.93 €
  Délai d'expédition minimum ：	4 jours

  *Prix unitaire/configuration de base

• 

  Flexible / collier, type C

  SHO-BOND COUPLING

  Leak repair material from pin holes of the straight pipe welded part. Can be constructed easily without stopping fluid.

  • Remise sur volume

  à partir de∗ ：	47.92 €
  Délai d'expédition minimum ：	3 jours

  *Prix unitaire/configuration de base

• 

  Flexible à poignée, type GT (branché)

  SHO-BOND COUPLING

  Branch provided on conventional G type to allow branching from fitting part.
  
  [Features]
  · Allows branching to be carried out at the same time as pipe connection.
  · Different diameter tees, etc. are not required.
  · Anybody can easily perform piping work.
  · The operation is simply to tighten the bolt.
  All stainless steel construction for corrosion resistance.
  · Parts made from SUS304 or SUS301.
  · The base is 2.
  · This is a G type with 0 MPa specifications.
  ·Boasting more than 30 years of sales, the G type continues to offer high-performance pressure resistance.
  · Ideal for temporary water supply piping.
  · Economical as repeated use is possible with a KUROMORI bolt.

  à partir de∗ ：	103.17 €
  Délai d'expédition minimum ：	5 jours

  *Prix unitaire/configuration de base

• 

  Poignée de flexible, type GU

  SHO-BOND COUPLING

  A Straub grip designed for copper pipes. 25A-40A can also be connected to non-stainless steel pipes.

  à partir de∗ ：	77.47 €
  Délai d'expédition minimum ：	14 jours

  *Prix unitaire/configuration de base

• 

  Flexible à poignée, type GX

  SHO-BOND COUPLING

  Revolutionary coupling type fitting. Thanks to adoption of the metal touch structure, torque management is not required.

  • Remise sur volume

  à partir de∗ ：	51.50 €
  Délai d'expédition minimum ：	3 jours

  *Prix unitaire/configuration de base

• 

  Poignée de flexible, type G

  SHO-BOND COUPLING

  Can be connected simply and safely as welding and threading are not required. Has earned a variety of certifications due to a long track record of performance. There are size limitations for products certified for fighting fires (for fire extinguishing equipment).
  
  [Features]
  Set includes a G type (G -32E to 150E) and a Stainless Steel SB Joint (elbow, tee, and reducer).
  · An SB joint is formed by welding a single pipe to the neck part of a stainless steel butt-welded pipe fitting compliant with stainless steel pipe JIS G 3448 and SAS 354 for general piping using an automatic welding device.

  • Remise sur volume

  à partir de∗ ：	53.16 €
  Délai d'expédition minimum ：	3 jours

  *Prix unitaire/configuration de base

• 

  Flexible / flex, type F

  SHO-BOND COUPLING

  A pipe fitting for used with wastewater, machinery, and other application that require no fall-out prevention. Can also be used for cable protection piping.

  • Remise sur volume

  à partir de∗ ：	59.69 €
  Délai d'expédition minimum ：	4 jours

  *Prix unitaire/configuration de base

• 

  Flexible à large collier, type CW

  SHO-BOND COUPLING

  Leak repair materials covering a broad range from pin holes to corrosion cracking. Can be applied easily without fluid stoppage.
  
  [Features]
  · Quickly and safely repairs a broad range of pin holes and corrosion cracks.

  à partir de∗ ：	108.34 €
  Délai d'expédition minimum ：	9 jours

  *Prix unitaire/configuration de base

• 

  Jeu de raccords SHO-BOND, coude à 90°

  SHO-BOND COUPLING

  Straub with grip, G type (2 equal-diameter pieces)

  à partir de∗ ：	149.44 €
  Délai d'expédition minimum ：	14 jours

  *Prix unitaire/configuration de base

• 

  Jeu de raccords SHO-BOND, coude à 45°

  SHO-BOND COUPLING

  Straub with grip, G type (2 equal-diameter pieces)

  à partir de∗ ：	144.42 €
  Délai d'expédition minimum ：	14 jours

  *Prix unitaire/configuration de base

• 

  Jeu de raccords SHO-BOND / raccord en T de même diamètre

  SHO-BOND COUPLING

  Straub with grip G type (2 equal diameter pieces)

  à partir de∗ ：	252.79 €
  Délai d'expédition minimum ：	14 jours

  *Prix unitaire/configuration de base

• 

  Jeu de raccords SHO-BOND, raccord en T de réduction

  SHO-BOND COUPLING

  [Features]
  · With a Straub grip G type (two with the same diameter and one different diameter).
  · Specify the nominal diameter and model number B304 when ordering.
  · The operating pressure of the SB is 1.0 MPa

  à partir de∗ ：	271.21 €
  Délai d'expédition minimum ：	5 jours

  *Prix unitaire/configuration de base

• 

  Jeu de raccords SHO-BOND, réducteur concentrique

  SHO-BOND COUPLING

  [Features]
  · Straub with grip G type (2 different diameter pieces).
  · Specify the nominal diameter and a model number of B305 when ordering.
  · The operating pressure of the SB is 1.0 MPa

  à partir de∗ ：	156.93 €
  Délai d'expédition minimum ：	14 jours

  *Prix unitaire/configuration de base

• 

  pour clé dynamométrique (pour accouplement de flexible)

  SHO-BOND COUPLING

  [Features]
  · Torque wrench for Straub coupling

  à partir de∗ ：	160.82 €
  Délai d'expédition minimum ：	4 jours

  *Prix unitaire/configuration de base

• 

  Douille hexagonale (pour accouplements de flexibles)

  SHO-BOND COUPLING

  A hexagonal socket for use with Straub couplings.

  à partir de∗ ：	10.16 €
  Délai d'expédition minimum ：	14 jours

  *Prix unitaire/configuration de base

• 

  Pièce de raccordement supérieure, type à expansion / souple, R-11

  RIKEN

  Equipped with a bolt-fall prevention feature. Utilizes a gasket that has been developed with extensive surface treatment and combines heat and chlorine resistance.

  • Remise sur volume

  à partir de∗ ：	30.95 €
  Délai d'expédition minimum ：	5 jours

  *Prix unitaire/configuration de base

• 

  Raccord supérieur, coude à 90°, F-1

  RIKEN

  Two types of surface coating primary, rustproof coating and molten zinc plating.

  • Remise sur volume

  à partir de∗ ：	12.37 €
  Délai d'expédition minimum ：	5 jours

  *Prix unitaire/configuration de base

• 

  Raccord supérieur, coude à 45°, F-2

  RIKEN

  There are two types of surface coating, primary rustproofing coating and molten zinc plating.

  • Remise sur volume

  à partir de∗ ：	19.42 €
  Délai d'expédition minimum ：	5 jours

  *Prix unitaire/configuration de base

• 

  Raccord supérieur, raccords en T F-3

  RIKEN

  There are two types of surface coating: primary rustproofing coating and molten zinc plating.

  • Remise sur volume

  à partir de∗ ：	19.11 €
  Délai d'expédition minimum ：	5 jours

  *Prix unitaire/configuration de base

• 

  Raccord supérieur, raccords en T de réduction F-3

  RIKEN

  There are two types of surface coating: primary rustproofing coating and molten zinc plating.

  • Remise sur volume

  à partir de∗ ：	38.48 €
  Délai d'expédition minimum ：	5 jours

  *Prix unitaire/configuration de base

• 

  Raccord supérieur, douille de réduction F-3

  RIKEN

  There are two types of surface coating primary rustproofing coating and molten zinc plating.

  • Remise sur volume

  à partir de∗ ：	12.07 €
  Délai d'expédition minimum ：	5 jours

  *Prix unitaire/configuration de base

• 

  Bride supérieure, FL-10

  RIKEN

  This top flange is used for connecting to a JIS 10K flange.

  • Remise sur volume

  à partir de∗ ：	52.22 €
  Délai d'expédition minimum ：	5 jours

  *Prix unitaire/configuration de base

• 

  Sortie supérieure, T-1, à vis

  RIKEN

  Designed for dissimilar metal joints, so it cannot be used for stainless steel pipes.
  
  [Features]
  · Wide selection of products for surface treatments.
  · Prevents bolt from dropping out during construction work, allowing safe and quick operation.
  · Due to recent environmental degradation affecting water supply, a high concentration of chlorine has been used for sterilization, significantly affecting pipes.
  · As a result, we have developed and adopted a gasket with heat resistant and chlorine resistant properties.
  · Because we offer a wide range of stainless steel SUS Top Systems, joining of mid to large diameter stainless steel piping is made easy via combinations of top joint epoxy-coated products and Nylon-coated products.
  · Pipe treatment and joining are simpler and faster than when threaded fittings or weld joining is used.
  · Structurally strong and flexible against pipe sagging and stretching (able to support loop piping, etc.).
  · Fitting suppresses elastic flexibility, supporting the R-5 and R-11, by providing unevenness on the mating surface of the housing.

  • Remise sur volume

  à partir de∗ ：	28.06 €
  Délai d'expédition minimum ：	5 jours

  *Prix unitaire/configuration de base

• 

  Sortie supérieure, T-2, à vis

  RIKEN

  Not suitable for use with stainless steel pipe as dissimilar metal joint would result.

  • Remise sur volume

  à partir de∗ ：	17.71 €
  Délai d'expédition minimum ：	5 jours

  *Prix unitaire/configuration de base

• 

  Système supérieur SUS (logement)

  RIKEN

  Designed for stainless steel pipes.
  
  [Features]
  · Wide selection of products for surface treatments.
  · Prevents bolt from dropping out during construction work, allowing safe and quick operation.
  · Due to recent environmental degradation affecting water supply, a high concentration of chlorine has been used for sterilization, significantly affecting pipes.
  · As a result, we have developed and adopted a gasket with heat resistant and chlorine resistant properties.
  · Because we offer a wide range of stainless steel SUS Top Systems, joining of mid to large diameter stainless steel piping is made easy via combinations of top joint epoxy-coated products and Nylon-coated products.
  · Pipe treatment and joining are simpler and faster than when threaded fittings or weld joining is used.
  · Structurally strong and flexible against pipe sagging and stretching (able to support loop piping, etc.).
  · Fitting suppresses elastic flexibility, supporting the R-5 and R-11, by providing unevenness on the mating surface of the housing.

  • Remise sur volume

  à partir de∗ ：	71.59 €
  Délai d'expédition minimum ：	5 jours

  *Prix unitaire/configuration de base

• 

  Système supérieur SUS (raccord), coude

  RIKEN

  For stainless steel pipes
  
  [Features]
  • For use in combination with a Koma-SUS fitting, enables flexible configurations of small- to medium-diameter stainless steel piping (13-150 SU).
  • Koma-SUS fittings are expanded type pipe fittings for stainless steel pipes that enable reliable pipe installations without requiring special tools or complicated techniques.
  • Well-received by customers and already in use in many installations.
  • Durable fitting due to pipe expansion: A structure where the nut attaches to the expansion portion of the pipe. If a nut was not tightened correctly, there is no need to worry about the nut coming off if it is engaged with the thread on the main body.
  • Easy pipe expansion: Enables easier pipe expansion than with a custom pipe expander machine.
  • To quickly provide secure bonds: Connections after pipe expansion can be done easily with a pipe wrench. Allowing for gasket space, prevents dislodging of gaskets which prevents unmounted components during installation.
  • Visually check for forgotten tightening by the red and blue FP collars: During the hand tightening phase, you can visually inspect the red FP collar. When tightening to the correct torque, the red FP collar will be hidden and no longer visible below the blue FP collar, allowing to confirm at a glance that tightening is complete.

  • Remise sur volume

  à partir de∗ ：	56.44 €
  Délai d'expédition minimum ：	5 jours

  *Prix unitaire/configuration de base

• 

  Système supérieur SUS (raccords), coude à 45°

  RIKEN

  For stainless steel pipes
  
  [Features]
  ▪Using in combination with a Koma-SUS fitting enables flexible arrangements of small- to medium-diameter stainless steel piping (13-150 SU). · Strong fitting by pipe expansion.
  · Fitting structure enables tube expanded portion to hook on a nut.
  · Even if nut is not tightened, there is no need to worry about the nut coming off if it is engaged with the screw on the main body.
  · Easy pipe expansion.
  ▪ With the dedicated pipe expander, pipe expansion work can be performed easily.
  · Secure connections are formed quickly.
  · Post pipe expansion fitting can be easily performed with a pipe wrench.
  ▪ By providing installation of packing room, packing falls are prevented, avoiding mounting failures of parts during construction.
  ▪ Tightening omission can be confirmed at a glance with FP colors of red and blue.
  ▪ At the hand tightening stage, you can visually inspect for the red FP color.
  · When tightened at an appropriate torque, the red FP color is hidden under the blue FP color and can no longer be seen. In this manner, tightening completion can be checked at a glance.

  • Remise sur volume

  à partir de∗ ：	53.23 €
  Délai d'expédition minimum ：	5 jours

  *Prix unitaire/configuration de base

• 

  Système supérieur SUS (raccord), raccords en T

  RIKEN

  For stainless steel pipes
  
  [Features]
  • For use in combination with a Koma-SUS fitting, enables flexible configurations of small- to medium-diameter stainless steel piping (13-150 SU).
  • Koma-SUS fittings are expanded type pipe fittings for stainless steel pipes that enable reliable pipe installations without requiring special tools or complicated techniques.
  • Well-received by customers and already in use in many installations.
  • Durable fitting due to pipe expansion: A structure where the nut attaches to the expansion portion of the pipe. If a nut was not tightened correctly, there is no need to worry about the nut coming off if it is engaged with the thread on the main body.
  • Easy pipe expansion: Enables easier pipe expansion than with a custom pipe expander machine.
  • To quickly provide secure bonds: Connections after pipe expansion can be done easily with a pipe wrench. Allowing for gasket space, prevents dislodging of gaskets which prevents unmounted components during installation.
  • Visually check for forgotten tightening by the red and blue FP collars: During the hand tightening phase, you can visually inspect the red FP collar. When tightening to the correct torque, the red FP collar will be hidden and no longer visible below the blue FP collar, making it possible to confirm at a glance that tightening is complete.

  • Remise sur volume

  à partir de∗ ：	92.81 €
  Délai d'expédition minimum ：	5 jours

  *Prix unitaire/configuration de base

• 

  Système supérieur SUS (raccords), capuchon

  RIKEN

  For stainless steel pipes

  • Remise sur volume

  à partir de∗ ：	18.46 €
  Délai d'expédition minimum ：	5 jours

  *Prix unitaire/configuration de base

• 

  Système supérieur SUS (raccord), adaptateur de bride type 10K

  RIKEN

  For stainless steel pipes
  
  [Features]
  · Koma-SUS fittings are expanded, pipe fittings for stainless steel pipes that enable reliable pipe installations without requiring special tools or complicated techniques.
  · Well-received by customers and already in use in many installations.
  · Strong fitting via pipe expansion.
  · Fitting features a structure wherein the tube's expanded portion is hooked onto a nut.
  · If the nut is not tightened, there is no need to worry about the nut coming off as it is engaged with the screw on the main body.
  · Secure connections are formed quickly.
  · Joining after expanding the pipe can easily be performed using a pipe wrench.
  · Furthermore, packing is prevented from falling out by providing a packing room, thus preventing part attachment failure during installation.
  · Tightening misses can be confirmed at a glance by checking whether the FP color is blue or red.
  · During hand tightening, a red FP color can be seen.
  · When tightening to the appropriate torque is completed, the red FP color is hidden and cannot be seen under the blue FP color, and completion of tightening can be confirmed at a glance.
  · Pipe expansion is easy.
  · Pipe expansion can easily be performed using a special pipe expander.

  • Remise sur volume

  à partir de∗ ：	177.98 €
  Délai d'expédition minimum ：	5 jours

  *Prix unitaire/configuration de base

• 

  Système supérieur SUS (raccords), raccords en T de réduction

  RIKEN

  For stainless steel pipes.

  • Remise sur volume

  à partir de∗ ：	143.02 €
  Délai d'expédition minimum ：	5 jours

  *Prix unitaire/configuration de base

• 

  Système supérieur de suspension (raccord), douille de réduction

  RIKEN

  For stainless steel pipes
  
  [Features]
  ▪ Due to the combination with Koma-SUS fitting, the stainless steel pipe of bore with small or medium size (13 to 150SU) can be flexibly used.
  · Koma-SUS fittings are expanded type pipe fittings for stainless steel pipes that enable reliable pipe installations without requiring special tools or complicated techniques.
  · Well-received by customers and already in use in many installations.
  · Strong fitting by pipe expansion.
  · Fitting has a structure where the tube's expanded portion is hooked on a nut.
  · If a nut is not tightened, there is no need to worry about the nut coming off if it is engaged with the screw on the main body.
  ▪ Easy pipe expansion.
  ▪ With the dedicated pipe expander, pipe expansion work can be performed easily.
  · Secure connections are formed quickly.
  ▪ Post pipe expansion fitting can be easily performed with a pipe wrench.
  ▪ By providing packing room, fall of packing is prevented. This prevents non-mounting of parts occurred during construction.
  ▪ Tightening omission can be confirmed at a glance with FP colors of red and blue.
  ▪ At the hand tightening stage, you can visually inspect for the red FP color.
  ▪ When tightened at an appropriate torque, the red FP color hides under the blue FP color and becomes invisible. In this manner, tightening completion can be checked at a glance.

  • Remise sur volume

  à partir de∗ ：	59.82 €
  Délai d'expédition minimum ：	5 jours

  *Prix unitaire/configuration de base

• 

  Accouplements ATOMS CORPORATION type GR pour connexions

  ATOMS

  à partir de∗ ：	48.65 €
  Délai d'expédition minimum ：	9 jours

  *Prix unitaire/configuration de base

• 

  Accouplements ATOMS CORPORATION type FX pour connexions

  ATOMS

  à partir de∗ ：	41.34 €
  Délai d'expédition minimum ：	9 jours

  *Prix unitaire/configuration de base

• 

  Accouplements ATOMS CORPORATION type FZ pour connexions

  ATOMS

  à partir de∗ ：	16.63 €
  Délai d'expédition minimum ：	3 jours

  *Prix unitaire/configuration de base

• 

  Accouplements ATOMS CORPORATION type CH pour réparations

  ATOMS

  à partir de∗ ：	37.80 €
  Délai d'expédition minimum ：	6 jours

  *Prix unitaire/configuration de base

• 

  Accouplements ATOMS CORPORATION type RC pour réparations

  ATOMS

  à partir de∗ ：	348.24 €
  Délai d'expédition minimum ：	9 jours

  *Prix unitaire/configuration de base

• 

  Accouplements ATOMS CORPORATION type CX pour réparations

  ATOMS

  à partir de∗ ：	42.05 €
  Délai d'expédition minimum ：	9 jours

  *Prix unitaire/configuration de base

• 

  Accouplements ATOMS CORPORATION type KC pour réparations

  ATOMS

  à partir de∗ ：	51.51 €
  Délai d'expédition minimum ：	6 jours

  *Prix unitaire/configuration de base

• 

  Accouplements ATOMS CORPORATION type FD pour réparations

  ATOMS

  à partir de∗ ：	44.42 €
  Délai d'expédition minimum ：	9 jours

  *Prix unitaire/configuration de base

• 

  Accouplements ATOMS CORPORATION type FD-L pour réparations

  ATOMS

  à partir de∗ ：	68.40 €
  Délai d'expédition minimum ：	9 jours

  *Prix unitaire/configuration de base

Loading...