Générateurs de vide/éjecteurs à vide

?* À propos du délai d'expédition et des prix

• 

  ZH*D*A, Générateur de vide, Montage en ligne, Millimètres

  SMC

  An ejector manufactured by SMC.
  [Features]
  · Compact and lightweight.

  Fichiers CAD 2D / 3D disponibles

  Sélectionner et comparer

  › Configurer maintenant
  à partir de∗ ：	16.47 €
  Délai d'expédition minimum ：	4 jours

  *Prix unitaire/configuration de base

• 

  ZH, Venturi, modèle compact / modèle en ligne

  SMC

  [Features]
  · Lightweight and compact
  · One-touch and screw-in connections can be combined
  · Body can be mounted and secured

  Fichiers CAD 2D / 3D disponibles

  Sélectionner et comparer

  › Configurer maintenant
  à partir de∗ ：	48.38 €
  Délai d'expédition minimum ：	Devis

  *Prix unitaire/configuration de base

• 

  ZU*A, Générateur de vide, modèle en ligne

  SMC

  An ejector manufactured by SMC.
  [Features]
  ● Vacuum port and supply port are located collinear to each other to facilitate easy piping.
  · Lightweight, as the body is made of resin.

  Fichiers CAD 2D / 3D disponibles

  Sélectionner et comparer

  › Configurer maintenant
  à partir de∗ ：	17.94 €
  Délai d'expédition minimum ：	3 jours

  *Prix unitaire/configuration de base

• 

  ZK2, Unité de vide, Système de générateur de vide avec distributeur

  SMC

  A vacuum unit ejector system manufactured by SMC
  [Features]
  · Built-in digital pressure switch for vacuums, with energy-saving function. Cuts the air supply upon reaching vacuum: Leading to 90% reduction in air consumption
  · Has a 2-stage ejector structure that increases suction flow rate by 50% and reduces air consumption by 30% (compared to SMC's single-stage ejectors)
  · Compact and lightweight, with a 28% reduction in volume (88 cm³) and a 59% reduction in weight (81 g) compared to conventional products
  · Reduced wiring for single units as well as manifolding.
  · Once the supply valve is switched ON, the vacuum generation state is maintained even if the power is cut off. This reduces power consumption.

  Fichiers CAD 2D / 3D disponibles

  Sélectionner et comparer

  › Configurer maintenant
  à partir de∗ ：	194.00 €
  Délai d'expédition minimum ：	4 jours

  *Prix unitaire/configuration de base

• 

  ZQ, Combinaison de venturis compact

  SMC

  Easy-to-use vacuum pressure switch.
  [Features]
  · Push button type for easier operation.
  · Vacuum pressure switch with LED display.
  · Can copy up to 10 switches simultaneously.
  · Settings for the master side (copy source) sensor can be copied to slave side sensors.
  · Reduced setting work.
  · Helps prevent setting mistakes.

  Sélectionner et comparer

  › Configurer maintenant
  à partir de∗ ：	383.15 €
  Délai d'expédition minimum ：	39 jours

  *Prix unitaire/configuration de base

• 

  Modèle à élément simple, modèle à montage direct, modèle droit avec électrovanne, mise à l'air libre

  NIHON PISCO

  and provides a rich selection of differing shapes and capabilities. *The CAD data for this series is being revised. This data will be made available as soon as the modifications have been completed.
  
  [Features]
  · Allows changing from compressed air to vacuum, and can be used for transporting items by combining with a vacuum pad.
  · Provides a rich lineup of differing capabilities and shapes, which allows meeting diverse conditions.
  · VH, VS, VU and VC types have been added for applications requiring "no copper-based metal use" and "low concentration ozone measures."
  · No copper-based metals are used in the metal component materials, and HNBR is utilized for the rubber sealing material.
  · Provides a rich selection of types with differing capabilities and shapes.

  Fichiers CAD 3D disponibles

  Sélectionner et comparer

  › Configurer maintenant
  à partir de∗ ：	19.69 €
  Délai d'expédition minimum ：	Jour même

  *Prix unitaire/configuration de base

• 

  Générateur de vide pour la ventilation des gaz de procédé série VG

  CKD

  Greatly reduces supplied fluid consumption and is resistant to pressure changes on the primary side.

  Sélectionner et comparer

  › Configurer maintenant
  à partir de∗ ：	521.62 €
  Délai d'expédition minimum ：	9 jours

  *Prix unitaire/configuration de base

• 

  NZM, Venturi avec vanne et détecteur, (mm)

  SMC

  An ejector manufactured by SMC.
  [Features]
  · All-in-one.
  · Capable of manifolding.
  · Maximum suction flow rate increased by 40%.
  · Maximum vacuum pressure -84 kPa.
  · Compact and lightweight.
  · Air-operated type.

  Fichiers CAD 2D / 3D disponibles

  Sélectionner et comparer

  › Configurer maintenant
  à partir de∗ ：	89.35 €
  Délai d'expédition minimum ：	Jour même

  *Prix unitaire/configuration de base

• 

  Supports de fixation, modèle VU avec générateur de vide

  NIHON PISCO

  *The CAD data for this series is being revised. This data will be made available as soon as the modifications have been completed.
  
  [Features]
  · Allows changing from compressed air to vacuum, and can be used for transporting items by combining with a vacuum pad.
  · Provides a rich lineup of differing capabilities and shapes, which allows meeting diverse conditions.
  · VH, VS, VU and VC types have been added for applications requiring "no copper-based metal use" and "low concentration ozone measures."
  · No copper-based metals are used in the metal component materials, and HNBR is utilized for the rubber sealing material.

  Fichiers CAD 3D disponibles

  Sélectionner et comparer

  › Configurer maintenant
  à partir de∗ ：	0.82 €
  Délai d'expédition minimum ：	Jour même

  *Prix unitaire/configuration de base

• 

  Modèle à simple élément, interrupteur de vide mécanique

  NIHON PISCO

  *The CAD data for this series is being revised. This data will be made available as soon as the modifications have been completed.
  
  [Features]
  · Allows changing from compressed air to vacuum, and can be used for transporting items by combining with a vacuum pad.
  · Provides a rich lineup of differing capabilities and shapes, which allows meeting diverse conditions.
  · VH, VS, VU and VC types have been added for applications requiring "no copper-based metal use" and "low concentration ozone measures."
  · No copper-based metals are used in the metal component materials, and HNBR is utilized for the rubber sealing material.

  Fichiers CAD 3D disponibles

  Sélectionner et comparer

  › Configurer maintenant
  à partir de∗ ：	49.60 €
  Délai d'expédition minimum ：	5 jours

  *Prix unitaire/configuration de base

• 

  Modèle à élément simple, carré, modèle à raccord union

  NIHON PISCO

  [Features]
  · Allows changing from compressed air to vacuum, and can be used for transporting items by combining with a vacuum pad.
  · Provides a rich lineup of differing capabilities and shapes, which allows meeting diverse conditions.
  · VH, VS, VU and VC types have been added for applications requiring "no copper-based metal use" and "low concentration ozone measures."
  · No copper-based metals are used in the metal component materials, and HNBR is utilized for the rubber sealing material.

  • Remise sur volume

  • Stock

  Fichiers CAD 3D disponibles

  Sélectionner et comparer

  › Configurer maintenant
  à partir de∗ ：	19.43 €
  Délai d'expédition minimum ：	Jour même

  *Prix unitaire/configuration de base

• 

  Interrupteur de vide de générateur de vide VG avec vanne d'alimentation / évacuation de vide et filtre intégré dans le câble de sortie horizontal

  NIHON PISCO

  Makes a unit of a vacuum switch, vacuum break valve, etc. *The CAD data for this series is being revised. This data will be made available as soon as the modifications have been completed.
  
  [Features]
  · Makes a unit of a vacuum switch, vacuum break valve, etc., and allows selection of a type suited to the purpose.
  · Makes available 3 types, with a former analog output added to the vacuum switch output specification, a 2‑point switch output, and an inexpensive analog output alone.

  Sélectionner et comparer

  › Configurer maintenant
  à partir de∗ ：	219.17 €
  Délai d'expédition minimum ：	12 jours

  *Prix unitaire/configuration de base

• 

  ZR, Combinaison de venturis pour le vide à débit élevé

  SMC

  A vacuum unit ejector system manufactured by SMC.
  [Features]
  · Large suction flow rate, suitable when used with large-sized pads or multiple pads.
  · Nozzle diameters: ø1.0, ø1.3, ø1.5, ø1.8, ø2.0
  · Vacuum unit suitable for workpieces of 0.5 to 5 kg.
  · Modular design makes it possible to combine functions as required.
  · Safe due to vacuum self-holding function by means of double solenoid valves.
  · Compact and lightweight.
  · Capable of manifolding.

  Fichiers CAD 2D / 3D disponibles

  Sélectionner et comparer

  › Configurer maintenant
  à partir de∗ ：	125.21 €
  Délai d'expédition minimum ：	4 jours

  *Prix unitaire/configuration de base

• 

  ZX, Venturi individuel, (mm)

  SMC

  A vacuum unit ejector system best suited to small precision components.
  [Features]
  · Electronic components weighing up to 100 g.
  · Modular design makes it possible to combine the most suitable functions.
  · Compact and lightweight (120 g with complete set), which makes it ideal for installing actuators.
  · Ejector nozzles available in 0.5 to 1.0‑mm diameters (suction flow rate 5 to 22 L/min [ANR]).
  · Capable of manifolding.

  Fichiers CAD 2D / 3D disponibles

  Sélectionner et comparer

  › Configurer maintenant
  à partir de∗ ：	150.89 €
  Délai d'expédition minimum ：	Jour même

  *Prix unitaire/configuration de base

• 

  ZB, Unité de vide compacte, À venturi

  SMC

  [Features]
  · Quick response: valve response time of 5 ms, vacuum response time of 28 ms
  · Energy-saving: 17% reduction in air consumption, 21% increase in vacuum pressure reached
  · Compact and lightweight: 46 g
  · Equipped with vacuum pressure switch; can copy up to 10 switches simultaneously

  Fichiers CAD 2D / 3D disponibles

  Sélectionner et comparer

  › Configurer maintenant
  à partir de∗ ：	136.31 €
  Délai d'expédition minimum ：	4 jours

  *Prix unitaire/configuration de base

• 

  Éjecteur à vide compact série ZA (ZA105/ZA107)

  SMC

  Un éjecteur à vide compact qui peut être installé sur des pièces mobiles.
  [Caractéristiques]
  · Convient pour une utilisation dans les collecteurs.
  · Temps de réponse*: 40 ms (temps de réponse jusqu'à -60 kPa).
  * Diamètre de buse 0,7 mm / tuyauterie: (⌀4 mm / ⌀2,5 mm) × 100 mm.
  · Unité simple / poids avec capteur de pression: 50 g.
  · Unité simple / poids sans capteur de pression: 45 g.
  · Embase multiple / 1 poste: 9 g, 2 postes: 11 g, 3 gares: 13 g, 4 postes: 15 g.
  · Embase multiple / 5 stations: 17 g, 6 stations: 19 g, 7 gares: 21 g, 8 stations: 23 g.
  · Calcul du poids de Type collecteur: (poids unitaire) x nombre de stations + (embase multiple).

  Fichiers CAD 2D / 3D disponibles

  Sélectionner et comparer

  › Configurer maintenant
  à partir de∗ ：	183.65 €
  Délai d'expédition minimum ：	26 jours

  *Prix unitaire/configuration de base

• 

  Unité de vide, Système de générateur de vide, Embase, ZZK2

  SMC

  · Ejector System (Manifold).
  · Easy maintenance.
  · Mounting variations.

  Sélectionner et comparer

  › Configurer maintenant
  à partir de∗ ：	87.03 €
  Délai d'expédition minimum ：	4 jours

  *Prix unitaire/configuration de base

• 

  Générateurs de vide - Avec fonction d'élimination du vide

  MISUMI

  • Remise sur volume

  Fichiers CAD 2D / 3D disponibles

  Sélectionner et comparer

  › Configurer maintenant
  à partir de∗ ：	41.33 €
  Délai d'expédition minimum ：	Jour même

  *Prix unitaire/configuration de base

• 

  Vanne à vide antichute

  MISUMI

  • Remise sur volume

  Fichiers CAD 2D / 3D disponibles

  Sélectionner et comparer

  › Configurer maintenant
  à partir de∗ ：	11.62 €
  Délai d'expédition minimum ：	Jour même

  *Prix unitaire/configuration de base

• 

  Générateur de vide - Raccord union carré

  MISUMI

  • Remise sur volume

  Fichiers CAD 2D / 3D disponibles

  Sélectionner et comparer

  › Configurer maintenant
  à partir de∗ ：	20.78 €
  Délai d'expédition minimum ：	Jour même

  *Prix unitaire/configuration de base

• 

  Générateur de vide - Raccord union droit

  MISUMI

  • Remise sur volume

  Fichiers CAD 2D / 3D disponibles

  Sélectionner et comparer

  › Configurer maintenant
  à partir de∗ ：	16.63 €
  Délai d'expédition minimum ：	5 jours

  *Prix unitaire/configuration de base

• 

  Supports de fixation, modèle VUM avec générateur de vide

  NIHON PISCO

  *The CAD data for this series is being revised. This data will be made available as soon as the modifications have been completed.
  
  [Features]
  · Allows changing from compressed air to vacuum, and can be used for transporting items by combining with a vacuum pad.
  · Provides a rich lineup of differing capabilities and shapes, which allows meeting diverse conditions.
  · VH, VS, VU and VC types have been added for applications requiring "no copper-based metal use" and "low concentration ozone measures."
  · No copper-based metals are used in the metal component materials, and HNBR is utilized for the rubber sealing material.

  Fichiers CAD 3D disponibles

  Sélectionner et comparer

  › Configurer maintenant
  à partir de∗ ：	0.82 €
  Délai d'expédition minimum ：	13 jours

  *Prix unitaire/configuration de base

• 

  Support spécial VY, générateur de vide

  NIHON PISCO

  *The CAD data for this series is being revised. This data will be made available as soon as the modifications have been completed.

  Fichiers CAD 3D disponibles

  Sélectionner et comparer

  › Configurer maintenant
  à partir de∗ ：	1.79 €
  Délai d'expédition minimum ：	13 jours

  *Prix unitaire/configuration de base

• 

  Modèle à élément simple, tampon, modèle à montage direct, coudes, mise à l'air libre

  NIHON PISCO

  and provides a rich selection of differing shapes and capabilities. *The CAD data for this series is being revised. This data will be made available as soon as the modifications have been completed.
  
  [Features]
  · Allows changing from compressed air to vacuum, and can be used for transporting items by combining with a vacuum pad.
  · Provides a rich lineup of differing capabilities and shapes, which allows meeting diverse conditions.
  · VH, VS, VU and VC types have been added for applications requiring "no copper-based metal use" and "low concentration ozone measures."
  · No copper-based metals are used in the metal component materials, and HNBR is utilized for the rubber sealing material.

  Fichiers CAD 3D disponibles

  Sélectionner et comparer

  › Configurer maintenant
  à partir de∗ ：	29.04 €
  Délai d'expédition minimum ：	12 jours

  *Prix unitaire/configuration de base

• 

  Modèle à élément simple, tampon, modèle à montage direct, coudes, échappement central

  NIHON PISCO

  and provides a rich selection of differing shapes and capabilities. *The CAD data for this series is being revised. This data will be made available as soon as the modifications have been completed.
  
  [Features]
  · Allows changing from compressed air to vacuum, and can be used for transporting items by combining with a vacuum pad.
  · Provides a rich lineup of differing capabilities and shapes, which allows meeting diverse conditions.
  · VH, VS, VU and VC types have been added for applications requiring "no copper-based metal use" and "low concentration ozone measures."
  · No copper-based metals are used in the metal component materials, and HNBR is utilized for the rubber sealing material.

  Fichiers CAD 3D disponibles

  Sélectionner et comparer

  › Configurer maintenant
  à partir de∗ ：	29.07 €
  Délai d'expédition minimum ：	10 jours

  *Prix unitaire/configuration de base

• 

  Coudes de type à montage direct avec tampon de type élément simple (type à économie d'énergie)

  NIHON PISCO

  and provides a rich selection of differing shapes and capabilities. *The CAD data for this series is being revised. This data will be made available as soon as the modifications have been completed.
  
  [Features]
  · Allows changing from compressed air to vacuum, and can be used for transporting items by combining with a vacuum pad.
  · Provides a rich lineup of differing capabilities and shapes, which allows meeting diverse conditions.
  · VH, VS, VU and VC types have been added for applications requiring "no copper-based metal use" and "low concentration ozone measures."
  · No copper-based metals are used in the metal component materials, and HNBR is utilized for the rubber sealing material.

  • Remise sur volume

  Fichiers CAD 3D disponibles

  Sélectionner et comparer

  › Configurer maintenant
  à partir de∗ ：	14.94 €
  Délai d'expédition minimum ：	10 jours

  *Prix unitaire/configuration de base

• 

  Modèle à élément simple, tampon, modèle à montage direct, droit, mise à l'air libre

  NIHON PISCO

  [Features]
  · Allows changing from compressed air to vacuum, and can be used for transporting items by combining with a vacuum pad.
  · Provides a rich lineup of differing capabilities and shapes, which allows meeting diverse conditions.
  · VH, VS, VU and VC types have been added for applications requiring "no copper-based metal use" and "low concentration ozone measures."
  · No copper-based metals are used in the metal component materials, and HNBR is utilized for the rubber sealing material.

  • Remise sur volume

  Fichiers CAD 3D disponibles

  Sélectionner et comparer

  › Configurer maintenant
  à partir de∗ ：	29.02 €
  Délai d'expédition minimum ：	5 jours

  *Prix unitaire/configuration de base

• 

  Modèle à élément simple, tampon, modèle à montage direct, droit, échappement central

  NIHON PISCO

  and provides a rich selection of differing shapes and capabilities. *The CAD data for this series is being revised. This data will be made available as soon as the modifications have been completed.
  
  [Features]
  · Allows changing from compressed air to vacuum, and can be used for transporting items by combining with a vacuum pad.
  · Provides a rich lineup of differing capabilities and shapes, which allows meeting diverse conditions.
  · VH, VS, VU and VC types have been added for applications requiring "no copper-based metal use" and "low concentration ozone measures."
  · No copper-based metals are used in the metal component materials, and HNBR is utilized for the rubber sealing material.

  Fichiers CAD 3D disponibles

  Sélectionner et comparer

  › Configurer maintenant
  à partir de∗ ：	29.89 €
  Délai d'expédition minimum ：	Jour même

  *Prix unitaire/configuration de base

• 

  Modèle à élément simple, tampon, modèle à montage direct, droit (modèle à économie d'énergie)

  NIHON PISCO

  and provides a rich selection of differing shapes and capabilities. *The CAD data for this series is being revised. This data will be made available as soon as the modifications have been completed.
  
  [Features]
  · Allows changing from compressed air to vacuum, and can be used for transporting items by combining with a vacuum pad.
  · Provides a rich lineup of differing capabilities and shapes, which allows meeting diverse conditions.
  · VH, VS, VU and VC types have been added for applications requiring "no copper-based metal use" and "low concentration ozone measures."
  · No copper-based metals are used in the metal component materials, and HNBR is utilized for the rubber sealing material.

  • Remise sur volume

  Fichiers CAD 3D disponibles

  Sélectionner et comparer

  › Configurer maintenant
  à partir de∗ ：	14.08 €
  Délai d'expédition minimum ：	Jour même

  *Prix unitaire/configuration de base

• 

  Modèle à simple élément, petit, tubulaire, droit, à l'air libre

  NIHON PISCO

  An ultra small and lightweight ejector. *The CAD data for this series is being revised. This data will be made available as soon as the modifications have been completed.
  
  [Features]
  · Allows changing from compressed air to vacuum, and can be used for transporting items by combining with a vacuum pad.
  · Provides a rich lineup of differing capabilities and shapes, which allows meeting diverse conditions.
  · VH, VS, VU and VC types have been added for applications requiring "no copper-based metal use" and "low concentration ozone measures."
  · No copper-based metals are used in the metal component materials, and HNBR is utilized for the rubber sealing material.

  Fichiers CAD 3D disponibles

  Sélectionner et comparer

  › Configurer maintenant
  à partir de∗ ：	14.86 €
  Délai d'expédition minimum ：	10 jours

  *Prix unitaire/configuration de base

• 

  Modèle à élément simple, petit, tubulaire, raccord union, droit, mise à l'air libre

  NIHON PISCO

  An ultra small and lightweight ejector. *The CAD data for this series is being revised. This data will be made available as soon as the modifications have been completed.
  
  [Features]
  · Allows changing from compressed air to vacuum, and can be used for transporting items by combining with a vacuum pad.
  · Provides a rich lineup of differing capabilities and shapes, which allows meeting diverse conditions.
  · VH, VS, VU and VC types have been added for applications requiring "no copper-based metal use" and "low concentration ozone measures."
  · No copper-based metals are used in the metal component materials, and HNBR is utilized for the rubber sealing material.

  • Remise sur volume

  Fichiers CAD 3D disponibles

  Sélectionner et comparer

  › Configurer maintenant
  à partir de∗ ：	14.86 €
  Délai d'expédition minimum ：	Jour même

  *Prix unitaire/configuration de base

• 

  Modèle à simple élément avec fonction d'élimination du vide, air libre

  NIHON PISCO

  Integrates the ejector with a vacuum break function. *The CAD data for this series is being revised. This data will be made available as soon as the modifications have been completed.
  
  [Features]
  · Allows changing from compressed air to vacuum, and can be used for transporting items by combining with a vacuum pad.
  · Provides a rich lineup of differing capabilities and shapes, which allows meeting diverse conditions.
  · VH, VS, VU and VC types have been added for applications requiring "no copper-based metal use" and "low concentration ozone measures."
  · No copper-based metals are used in the metal component materials, and HNBR is utilized for the rubber sealing material.
  · Integrates the ejector with a vacuum break function. Use of a vacuum generator with regular electromagnetic valve provides a great reduction in price.
  · It is small and lightweight, and it can be used at the terminal end of a vacuum pipe. In addition, mounting of a shutoff valve provides high speed for the suction / break cycle.

  • Remise sur volume

  Fichiers CAD 3D disponibles

  Sélectionner et comparer

  › Configurer maintenant
  à partir de∗ ：	39.73 €
  Délai d'expédition minimum ：	Jour même

  *Prix unitaire/configuration de base

• 

  Type à simple élément avec fonction d'élimination du vide, vide avec filtre à l'air libre

  NIHON PISCO

  Integrates the ejector with a vacuum break function. *The CAD data for this series is being revised. This data will be made available as soon as the modifications have been completed.
  
  [Features]
  · Allows changing from compressed air to vacuum, and can be used for transporting items by combining with a vacuum pad.
  · Provides a rich lineup of differing capabilities and shapes, which allows meeting diverse conditions.
  · VH, VS, VU and VC types have been added for applications requiring "no copper-based metal use" and "low concentration ozone measures."
  · No copper-based metals are used in the metal component materials, and HNBR is utilized for the rubber sealing material.
  · Integrates the ejector with a vacuum break function. Use of a vacuum generator with regular electromagnetic valve provides a great reduction in price.
  · It is small and lightweight, and it can be used at the terminal end of a vacuum pipe. In addition, mounting of a shutoff valve provides high speed for the suction / break cycle.

  • Remise sur volume

  Fichiers CAD 3D disponibles

  Sélectionner et comparer

  › Configurer maintenant
  à partir de∗ ：	43.12 €
  Délai d'expédition minimum ：	Jour même

  *Prix unitaire/configuration de base

• 

  Modèle à simple élément avec fonction d'élimination du vide, échappement central

  NIHON PISCO

  Integrates the ejector with a vacuum break function. *The CAD data for this series is being revised. This data will be made available as soon as the modifications have been completed.
  
  [Features]
  · Allows changing from compressed air to vacuum, and can be used for transporting items by combining with a vacuum pad.
  · Provides a rich lineup of differing capabilities and shapes, which allows meeting diverse conditions.
  · VH, VS, VU and VC types have been added for applications requiring "no copper-based metal use" and "low concentration ozone measures."
  · No copper-based metals are used in the metal component materials, and HNBR is utilized for the rubber sealing material.
  · Integrates the ejector with a vacuum break function. Use of a vacuum generator with regular electromagnetic valve provides a great reduction in price.
  · It is small and lightweight, and it can be used at the terminal end of a vacuum pipe. In addition, mounting of a shutoff valve provides high speed for the suction / break cycle.

  Fichiers CAD 3D disponibles

  Sélectionner et comparer

  › Configurer maintenant
  à partir de∗ ：	42.05 €
  Délai d'expédition minimum ：	13 jours

  *Prix unitaire/configuration de base

• 

  Modèle à élément simple, adaptateur de modèle à tuyau, modèle à mise à l'air libre

  NIHON PISCO

  [Features]
  · Allows changing from compressed air to vacuum, and can be used for transporting items by combining with a vacuum pad.
  · Provides a rich lineup of differing capabilities and shapes, which allows meeting diverse conditions.
  · VH, VS, VU and VC types have been added for applications requiring "no copper-based metal use" and "low concentration ozone measures."
  · No copper-based metals are used in the metal component materials, and HNBR is utilized for the rubber sealing material.

  • Remise sur volume

  Fichiers CAD 3D disponibles

  Sélectionner et comparer

  › Configurer maintenant
  à partir de∗ ：	14.89 €
  Délai d'expédition minimum ：	Jour même

  *Prix unitaire/configuration de base

• 

  Modèle à élément simple, modèle à tuyau, modèle à adaptateur, échappement central

  NIHON PISCO

  and provides a rich selection of differing shapes and capabilities. *The CAD data for this series is being revised. This data will be made available as soon as the modifications have been completed.
  
  [Features]
  · Allows changing from compressed air to vacuum, and can be used for transporting items by combining with a vacuum pad.
  · Provides a rich lineup of differing capabilities and shapes, which allows meeting diverse conditions.
  · VH, VS, VU and VC types have been added for applications requiring "no copper-based metal use" and "low concentration ozone measures."
  · No copper-based metals are used in the metal component materials, and HNBR is utilized for the rubber sealing material.
  · Provides a rich selection of types with differing capabilities and shapes.

  Fichiers CAD 3D disponibles

  Sélectionner et comparer

  › Configurer maintenant
  à partir de∗ ：	16.56 €
  Délai d'expédition minimum ：	Jour même

  *Prix unitaire/configuration de base

• 

  Modèle à élément simple, modèle à tuyau, modèle droit, mise à l'air libre

  NIHON PISCO

  and provides a rich selection of differing shapes and capabilities. *The CAD data for this series is being revised. This data will be made available as soon as the modifications have been completed.
  
  [Features]
  · Allows changing from compressed air to vacuum, and can be used for transporting items by combining with a vacuum pad.
  · Provides a rich lineup of differing capabilities and shapes, which allows meeting diverse conditions.
  · VH, VS, VU and VC types have been added for applications requiring "no copper-based metal use" and "low concentration ozone measures."
  · No copper-based metals are used in the metal component materials, and HNBR is utilized for the rubber sealing material.
  · Provides a rich selection of types with differing capabilities and shapes.

  Fichiers CAD 3D disponibles

  Sélectionner et comparer

  › Configurer maintenant
  à partir de∗ ：	16.57 €
  Délai d'expédition minimum ：	Jour même

  *Prix unitaire/configuration de base

• 

  Modèle à élément simple, modèle à tuyau, modèle droit, échappement central

  NIHON PISCO

  and provides a rich selection of differing shapes and capabilities. *The CAD data for this series is being revised. This data will be made available as soon as the modifications have been completed.
  
  [Features]
  · Allows changing from compressed air to vacuum, and can be used for transporting items by combining with a vacuum pad.
  · Provides a rich lineup of differing capabilities and shapes, which allows meeting diverse conditions.
  · VH, VS, VU and VC types have been added for applications requiring "no copper-based metal use" and "low concentration ozone measures."
  · No copper-based metals are used in the metal component materials, and HNBR is utilized for the rubber sealing material.
  · Provides a rich selection of types with differing capabilities and shapes.

  Fichiers CAD 3D disponibles

  Sélectionner et comparer

  › Configurer maintenant
  à partir de∗ ：	16.60 €
  Délai d'expédition minimum ：	10 jours

  *Prix unitaire/configuration de base

• 

  Modèle à élément simple, modèle à tuyau, raccord union, droit, modèle à mise à l'air libre

  NIHON PISCO

  [Features]
  · Allows changing from compressed air to vacuum, and can be used for transporting items by combining with a vacuum pad.
  · Provides a rich lineup of differing capabilities and shapes, which allows meeting diverse conditions.
  · VH, VS, VU and VC types have been added for applications requiring "no copper-based metal use" and "low concentration ozone measures."
  · No copper-based metals are used in the metal component materials, and HNBR is utilized for the rubber sealing material.

  • Remise sur volume

  Fichiers CAD 3D disponibles

  Sélectionner et comparer

  › Configurer maintenant
  à partir de∗ ：	16.57 €
  Délai d'expédition minimum ：	Jour même

  *Prix unitaire/configuration de base

• 

  Modèle à élément simple, modèle à tuyau, raccord union, modèle droit, échappement central

  NIHON PISCO

  [Features]
  · Allows changing from compressed air to vacuum, and can be used for transporting items by combining with a vacuum pad.
  · Provides a rich lineup of differing capabilities and shapes, which allows meeting diverse conditions.
  · VH, VS, VU and VC types have been added for applications requiring "no copper-based metal use" and "low concentration ozone measures."
  · No copper-based metals are used in the metal component materials, and HNBR is utilized for the rubber sealing material.

  • Remise sur volume

  Fichiers CAD 3D disponibles

  Sélectionner et comparer

  › Configurer maintenant
  à partir de∗ ：	18.66 €
  Délai d'expédition minimum ：	Jour même

  *Prix unitaire/configuration de base

• 

  Modèle à élément simple, convoyage de granulés / poudre, modèle A, droit

  NIHON PISCO

  *The CAD data for this series is being revised. This data will be made available as soon as the modifications have been completed.
  
  [Features]
  · Transports small indefinite shaped working material such as granules, powder and fiber.
  · A vacuum (intake) port and exhaust port are in a single line, and by expelling the working material from the vacuum port through the interior of the vacuum generator VRL, the working material can be transported through the tube.
  · Allows model selection by size and weight of working material.
  · Transports small indefinite shaped working material such as granules, powder and fiber.

  Fichiers CAD 3D disponibles

  Sélectionner et comparer

  › Configurer maintenant
  à partir de∗ ：	48.83 €
  Délai d'expédition minimum ：	5 jours

  *Prix unitaire/configuration de base

• 

  Modèle à élément simple, convoyage de granulés / poudre, droit, modèle B

  NIHON PISCO

  Transports small indefinite shaped working material such as granules, powder and fiber.
  
  [Features]
  · Transports small indefinite shaped working material such as granules, powder and fiber.
  · A vacuum (intake) port and exhaust port are in a single line, and by expelling the working material from the vacuum port through the interior of the vacuum generator VRL, the working material can be transported through the tube.
  · Allows model selection by size and weight of working material.

  Fichiers CAD 3D disponibles

  Sélectionner et comparer

  › Configurer maintenant
  à partir de∗ ：	48.96 €
  Délai d'expédition minimum ：	5 jours

  *Prix unitaire/configuration de base

• 

  Modèle à élément simple, convoyage de granulés / poudre, droit (modèle C)

  NIHON PISCO

  *The CAD data for this series is being revised. This data will be made available as soon as the modifications have been completed.
  
  [Features]
  · Transports small indefinite shaped working material such as granules, powder and fiber.
  · A vacuum (intake) port and exhaust port are in a single line, and by expelling the working material from the vacuum port through the interior of the vacuum generator VRL, the working material can be transported through the tube.
  · Allows model selection by size and weight of working material.
  · Transports small indefinite shaped working material such as granules, powder and fiber.

  Fichiers CAD 3D disponibles

  Sélectionner et comparer

  › Configurer maintenant
  à partir de∗ ：	52.93 €
  Délai d'expédition minimum ：	10 jours

  *Prix unitaire/configuration de base

• 

  Modèle à élément simple, convoyage de granulés / poudre, droit (modèle D)

  NIHON PISCO

  Transports small indefinite shaped working material such as granules, powder and fiber. *The CAD data for this series is being revised. This data will be made available as soon as the modifications have been completed.
  
  [Features]
  · Transports small indefinite shaped working material such as granules, powder and fiber.
  · A vacuum (intake) port and exhaust port are in a single line, and by expelling the working material from the vacuum port through the interior of the vacuum generator VRL, the working material can be transported through the tube.
  · Allows model selection by size and weight of working material.

  Fichiers CAD 3D disponibles

  Sélectionner et comparer

  › Configurer maintenant
  à partir de∗ ：	53.02 €
  Délai d'expédition minimum ：	10 jours

  *Prix unitaire/configuration de base

• 

  Modèle à élément simple, convoyage de granulés / poudre, modèle A, à embout

  NIHON PISCO

  Transports small indefinite shaped working material such as granules, powder and fiber. *The CAD data for this series is being revised. This data will be made available as soon as the modifications have been completed.
  
  [Features]
  · Transports small indefinite shaped working material such as granules, powder and fiber.
  · A vacuum (intake) port and exhaust port are in a single line, and by expelling the working material from the vacuum port through the interior of the vacuum generator VRL, the working material can be transported through the tube.
  · Allows model selection by size and weight of working material.

  Fichiers CAD 3D disponibles

  Sélectionner et comparer

  › Configurer maintenant
  à partir de∗ ：	43.23 €
  Délai d'expédition minimum ：	5 jours

  *Prix unitaire/configuration de base

Loading...