Générateurs de vide/éjecteurs à vide（Diam. de buse：1,0mm）

?* À propos du délai d'expédition et des prix

• 

  ZH*D*A, Générateur de vide, Montage en ligne, Millimètres

  SMC

  An ejector manufactured by SMC.
  [Features]
  · Compact and lightweight.

  Fichiers CAD 2D / 3D disponibles

  Sélectionner et comparer

  › Configurer maintenant
  à partir de∗ ：	24.31 €
  Délai d'expédition minimum ：	4 jours

  *Prix unitaire/configuration de base

• 

  ZK2, Unité de vide, Système de générateur de vide avec distributeur

  SMC

  A vacuum unit ejector system manufactured by SMC
  [Features]
  · Built-in digital pressure switch for vacuums, with energy-saving function. Cuts the air supply upon reaching vacuum: Leading to 90% reduction in air consumption
  · Has a 2-stage ejector structure that increases suction flow rate by 50% and reduces air consumption by 30% (compared to SMC's single-stage ejectors)
  · Compact and lightweight, with a 28% reduction in volume (88 cm³) and a 59% reduction in weight (81 g) compared to conventional products
  · Reduced wiring for single units as well as manifolding.
  · Once the supply valve is switched ON, the vacuum generation state is maintained even if the power is cut off. This reduces power consumption.

  Fichiers CAD 2D / 3D disponibles

  Sélectionner et comparer

  › Configurer maintenant
  à partir de∗ ：	194.00 €
  Délai d'expédition minimum ：	4 jours

  *Prix unitaire/configuration de base

• 

  ZQ, Combinaison de venturis compact

  SMC

  Easy-to-use vacuum pressure switch.
  [Features]
  · Push button type for easier operation.
  · Vacuum pressure switch with LED display.
  · Can copy up to 10 switches simultaneously.
  · Settings for the master side (copy source) sensor can be copied to slave side sensors.
  · Reduced setting work.
  · Helps prevent setting mistakes.

  Sélectionner et comparer

  › Configurer maintenant
  à partir de∗ ：	383.15 €
  Délai d'expédition minimum ：	39 jours

  *Prix unitaire/configuration de base

• 

  Modèle à élément simple, modèle à montage direct, modèle droit avec électrovanne, mise à l'air libre

  NIHON PISCO

  and provides a rich selection of differing shapes and capabilities. *The CAD data for this series is being revised. This data will be made available as soon as the modifications have been completed.
  
  [Features]
  · Allows changing from compressed air to vacuum, and can be used for transporting items by combining with a vacuum pad.
  · Provides a rich lineup of differing capabilities and shapes, which allows meeting diverse conditions.
  · VH, VS, VU and VC types have been added for applications requiring "no copper-based metal use" and "low concentration ozone measures."
  · No copper-based metals are used in the metal component materials, and HNBR is utilized for the rubber sealing material.
  · Provides a rich selection of types with differing capabilities and shapes.

  Fichiers CAD 3D disponibles

  Sélectionner et comparer

  › Configurer maintenant
  à partir de∗ ：	20.84 €
  Délai d'expédition minimum ：	10 jours

  *Prix unitaire/configuration de base

• 

  NZM, Venturi avec vanne et détecteur, (mm)

  SMC

  An ejector manufactured by SMC.
  [Features]
  · All-in-one.
  · Capable of manifolding.
  · Maximum suction flow rate increased by 40%.
  · Maximum vacuum pressure -84 kPa.
  · Compact and lightweight.
  · Air-operated type.

  Fichiers CAD 2D / 3D disponibles

  Sélectionner et comparer

  › Configurer maintenant
  à partir de∗ ：	89.35 €
  Délai d'expédition minimum ：	4 jours

  *Prix unitaire/configuration de base

• 

  Modèle à élément simple, carré, modèle à raccord union

  NIHON PISCO

  [Features]
  · Allows changing from compressed air to vacuum, and can be used for transporting items by combining with a vacuum pad.
  · Provides a rich lineup of differing capabilities and shapes, which allows meeting diverse conditions.
  · VH, VS, VU and VC types have been added for applications requiring "no copper-based metal use" and "low concentration ozone measures."
  · No copper-based metals are used in the metal component materials, and HNBR is utilized for the rubber sealing material.

  • Remise sur volume

  • Stock

  Fichiers CAD 3D disponibles

  Sélectionner et comparer

  › Configurer maintenant
  à partir de∗ ：	19.43 €
  Délai d'expédition minimum ：	Jour même

  *Prix unitaire/configuration de base

• 

  Interrupteur de vide de générateur de vide VG avec vanne d'alimentation / évacuation de vide et filtre intégré dans le câble de sortie horizontal

  NIHON PISCO

  Makes a unit of a vacuum switch, vacuum break valve, etc. *The CAD data for this series is being revised. This data will be made available as soon as the modifications have been completed.
  
  [Features]
  · Makes a unit of a vacuum switch, vacuum break valve, etc., and allows selection of a type suited to the purpose.
  · Makes available 3 types, with a former analog output added to the vacuum switch output specification, a 2‑point switch output, and an inexpensive analog output alone.

  Sélectionner et comparer

  › Configurer maintenant
  à partir de∗ ：	219.17 €
  Délai d'expédition minimum ：	12 jours

  *Prix unitaire/configuration de base

• 

  ZR, Combinaison de venturis pour le vide à débit élevé

  SMC

  A vacuum unit ejector system manufactured by SMC.
  [Features]
  · Large suction flow rate, suitable when used with large-sized pads or multiple pads.
  · Nozzle diameters: ø1.0, ø1.3, ø1.5, ø1.8, ø2.0
  · Vacuum unit suitable for workpieces of 0.5 to 5 kg.
  · Modular design makes it possible to combine functions as required.
  · Safe due to vacuum self-holding function by means of double solenoid valves.
  · Compact and lightweight.
  · Capable of manifolding.

  Fichiers CAD 2D / 3D disponibles

  Sélectionner et comparer

  › Configurer maintenant
  à partir de∗ ：	125.21 €
  Délai d'expédition minimum ：	26 jours

  *Prix unitaire/configuration de base

• 

  ZX, Venturi individuel, (mm)

  SMC

  A vacuum unit ejector system best suited to small precision components.
  [Features]
  · Electronic components weighing up to 100 g.
  · Modular design makes it possible to combine the most suitable functions.
  · Compact and lightweight (120 g with complete set), which makes it ideal for installing actuators.
  · Ejector nozzles available in 0.5 to 1.0‑mm diameters (suction flow rate 5 to 22 L/min [ANR]).
  · Capable of manifolding.

  Fichiers CAD 2D / 3D disponibles

  Sélectionner et comparer

  › Configurer maintenant
  à partir de∗ ：	150.89 €
  Délai d'expédition minimum ：	Jour même

  *Prix unitaire/configuration de base

• 

  Modèle à élément simple, tampon, modèle à montage direct, coudes, mise à l'air libre

  NIHON PISCO

  and provides a rich selection of differing shapes and capabilities. *The CAD data for this series is being revised. This data will be made available as soon as the modifications have been completed.
  
  [Features]
  · Allows changing from compressed air to vacuum, and can be used for transporting items by combining with a vacuum pad.
  · Provides a rich lineup of differing capabilities and shapes, which allows meeting diverse conditions.
  · VH, VS, VU and VC types have been added for applications requiring "no copper-based metal use" and "low concentration ozone measures."
  · No copper-based metals are used in the metal component materials, and HNBR is utilized for the rubber sealing material.

  Fichiers CAD 3D disponibles

  Sélectionner et comparer

  › Configurer maintenant
  à partir de∗ ：	29.04 €
  Délai d'expédition minimum ：	12 jours

  *Prix unitaire/configuration de base

• 

  Modèle à élément simple, tampon, modèle à montage direct, coudes, échappement central

  NIHON PISCO

  and provides a rich selection of differing shapes and capabilities. *The CAD data for this series is being revised. This data will be made available as soon as the modifications have been completed.
  
  [Features]
  · Allows changing from compressed air to vacuum, and can be used for transporting items by combining with a vacuum pad.
  · Provides a rich lineup of differing capabilities and shapes, which allows meeting diverse conditions.
  · VH, VS, VU and VC types have been added for applications requiring "no copper-based metal use" and "low concentration ozone measures."
  · No copper-based metals are used in the metal component materials, and HNBR is utilized for the rubber sealing material.

  Fichiers CAD 3D disponibles

  Sélectionner et comparer

  › Configurer maintenant
  à partir de∗ ：	29.08 €
  Délai d'expédition minimum ：	10 jours

  *Prix unitaire/configuration de base

• 

  Modèle à élément simple, tampon, modèle à montage direct, droit, mise à l'air libre

  NIHON PISCO

  [Features]
  · Allows changing from compressed air to vacuum, and can be used for transporting items by combining with a vacuum pad.
  · Provides a rich lineup of differing capabilities and shapes, which allows meeting diverse conditions.
  · VH, VS, VU and VC types have been added for applications requiring "no copper-based metal use" and "low concentration ozone measures."
  · No copper-based metals are used in the metal component materials, and HNBR is utilized for the rubber sealing material.

  • Remise sur volume

  Fichiers CAD 3D disponibles

  Sélectionner et comparer

  › Configurer maintenant
  à partir de∗ ：	29.02 €
  Délai d'expédition minimum ：	5 jours

  *Prix unitaire/configuration de base

• 

  Modèle à élément simple, tampon, modèle à montage direct, droit, échappement central

  NIHON PISCO

  and provides a rich selection of differing shapes and capabilities. *The CAD data for this series is being revised. This data will be made available as soon as the modifications have been completed.
  
  [Features]
  · Allows changing from compressed air to vacuum, and can be used for transporting items by combining with a vacuum pad.
  · Provides a rich lineup of differing capabilities and shapes, which allows meeting diverse conditions.
  · VH, VS, VU and VC types have been added for applications requiring "no copper-based metal use" and "low concentration ozone measures."
  · No copper-based metals are used in the metal component materials, and HNBR is utilized for the rubber sealing material.

  Fichiers CAD 3D disponibles

  Sélectionner et comparer

  › Configurer maintenant
  à partir de∗ ：	29.89 €
  Délai d'expédition minimum ：	Jour même

  *Prix unitaire/configuration de base

• 

  Modèle à élément simple, carré, modèle à raccord union, interrupteur à vide intégré

  NIHON PISCO

  and provides a rich selection of differing shapes and capabilities. *The CAD data for this series is being revised. This data will be made available as soon as the modifications have been completed.
  
  [Features]
  · Allows changing from compressed air to vacuum, and can be used for transporting items by combining with a vacuum pad.
  · Provides a rich lineup of differing capabilities and shapes, which allows meeting diverse conditions.
  · VH, VS, VU and VC types have been added for applications requiring "no copper-based metal use" and "low concentration ozone measures."
  · No copper-based metals are used in the metal component materials, and HNBR is utilized for the rubber sealing material.

  Fichiers CAD 3D disponibles

  Sélectionner et comparer

  › Configurer maintenant
  à partir de∗ ：	66.18 €
  Délai d'expédition minimum ：	10 jours

  *Prix unitaire/configuration de base

• 

  Modèle à élément simple, modèle à montage direct, modèle coudé avec électrovanne, mise à l'air libre

  NIHON PISCO

  and provides a rich selection of differing shapes and capabilities. *The CAD data for this series is being revised. This data will be made available as soon as the modifications have been completed.
  
  [Features]
  · Allows changing from compressed air to vacuum, and can be used for transporting items by combining with a vacuum pad.
  · Provides a rich lineup of differing capabilities and shapes, which allows meeting diverse conditions.
  · VH, VS, VU and VC types have been added for applications requiring "no copper-based metal use" and "low concentration ozone measures."
  · No copper-based metals are used in the metal component materials, and HNBR is utilized for the rubber sealing material.

  • Remise sur volume

  • Stock

  Fichiers CAD 3D disponibles

  Sélectionner et comparer

  › Configurer maintenant
  à partir de∗ ：	20.84 €
  Délai d'expédition minimum ：	Jour même

  *Prix unitaire/configuration de base

• 

  Modèle à élément simple, modèle à montage direct, modèle coudé avec électrovanne, échappement central

  NIHON PISCO

  and provides a rich selection of differing shapes and capabilities. *The CAD data for this series is being revised. This data will be made available as soon as the modifications have been completed.
  
  [Features]
  · Allows changing from compressed air to vacuum, and can be used for transporting items by combining with a vacuum pad.
  · Provides a rich lineup of differing capabilities and shapes, which allows meeting diverse conditions.
  · VH, VS, VU and VC types have been added for applications requiring "no copper-based metal use" and "low concentration ozone measures."
  · No copper-based metals are used in the metal component materials, and HNBR is utilized for the rubber sealing material.

  • Remise sur volume

  Fichiers CAD 3D disponibles

  Sélectionner et comparer

  › Configurer maintenant
  à partir de∗ ：	21.72 €
  Délai d'expédition minimum ：	5 jours

  *Prix unitaire/configuration de base

• 

  Modèle à élément simple, modèle à montage direct, modèle droit avec électrovanne, échappement central

  NIHON PISCO

  and provides a rich selection of differing shapes and capabilities. *The CAD data for this series is being revised. This data will be made available as soon as the modifications have been completed.
  
  [Features]
  · Allows changing from compressed air to vacuum, and can be used for transporting items by combining with a vacuum pad.
  · Provides a rich lineup of differing capabilities and shapes, which allows meeting diverse conditions.
  · VH, VS, VU and VC types have been added for applications requiring "no copper-based metal use" and "low concentration ozone measures."
  · No copper-based metals are used in the metal component materials, and HNBR is utilized for the rubber sealing material.
  · Provides a rich selection of types with differing capabilities and shapes.

  Fichiers CAD 3D disponibles

  Sélectionner et comparer

  › Configurer maintenant
  à partir de∗ ：	21.72 €
  Délai d'expédition minimum ：	10 jours

  *Prix unitaire/configuration de base

• 

  Filtre intégré au générateur de vide VG

  NIHON PISCO

  [Features]
  · Makes a unit of a vacuum switch, vacuum break valve, etc., and allows selection of a type suited to the purpose.
  · Makes available 3 types, with a former analog output added to the vacuum switch output specification, a 2‑point switch output, and an inexpensive analog output alone.

  • Remise sur volume

  Sélectionner et comparer

  › Configurer maintenant
  à partir de∗ ：	39.85 €
  Délai d'expédition minimum ：	5 jours

  *Prix unitaire/configuration de base

• 

  Générateur de vide avec capteur de pression série VQ

  NIHON PISCO

  *The CAD data for this series is being revised. This data will be made available as soon as the modifications have been completed.
  
  [Features]
  Combination type vacuum generator, optimal for controlling large flow rates.
  Pressure sensor specification (30‑mm wide, dual-output, NPN open collector output pressure sensor)

  Fichiers CAD 2D / 3D disponibles

  Sélectionner et comparer

  › Configurer maintenant
  à partir de∗ ：	230.01 €
  Délai d'expédition minimum ：	12 jours

  *Prix unitaire/configuration de base

Loading...