Boulons à œil (Vis nominale (M): M 8)
Norme technique
6 articles
* À propos du délai d'expédition, frais de transport et des prix
- REMISE
- Remise sur volume
GANTER
The following guidelines of the lifting eye nuts DIN 582 have to be observed in addition to the load values given in the above table.The eye nut must be of fully screwd in to achieve a perfect contact between the two mating faces.Both threads must be of a equal length and the base material of equal strength to that of the nut.Operating instructions with more details and specifications are included with every delivery (see also www.ganter-griff.com/service).The official DIN standard sheet specifies the additional sizes M42, M48, M56, M64, M72 x 6, M80 x 6 und M100 x 6.En savoir plusVis nominale (M) Longueur L (mm) Matériau Forme d'embout Niveau de résistance (acier) Type de filetage Unité de vente Application Norme technique M 8 - Acier - - - - - - Configurer maintenantPrix HT (hors TVA) :2.58 €Prix HT (hors TVA) :Prix spécialJour d’expédition pevue :7 jours ouvrables
- Remise sur volume
GANTER
These lifting eye bolts correspond to standard sheet DIN 580.The following guidelines of lifting eye bolts DIN 580 the have to be observed in addition to the load values given in the above table.The eye bolt must be of fully screwd in to achieve a perfect contact between the two mating faces.Both threads must be of a equal length and the base material of equal strength to that of the bolt.Operating instructions with more details and specifications are included with every delivery (see also www.ganter-griff.com/service).The official DIN standard sheet specifies the additional sizes M42, M48, M56, M64, M72 x 6, M80 x 6 und M100 x 6.En savoir plusVis nominale (M) Longueur L (mm) Matériau Forme d'embout Niveau de résistance (acier) Type de filetage Unité de vente Application Norme technique M 8 - Acier - - - - - - Configurer maintenantPrix HT (hors TVA) :2.62 €Jour d’expédition pevue :Article en stock : 1 jour ouvrablePossibilité d’expédition le jour même
- REMISE
- Remise sur volume
GANTER
Lifting eye bolts (rotating), Steel
The lifting eye bolts GN 581are mounted in rotating bearings, allowing the direction of the force action to be adjusted and preventing inadvertent loosening or overturning (as potentially possible in lifting eye bolts DIN 580).Lifting eye bolts GN 581 offer a high load carrying capacity and they are tested to meet safety standards (safety factor 4).The rated load carrying capacity listed in the above table is clearly marked on the ring. It applies to the most unfavourable load application of the load types listed opposite.Lifting eye bolts GN 581 comply with Mechanical Engineering Directive 2006 / 42 / EG and are BG tested.The integrated RFID transponder clearly marks and identifies the sling and lifting gear, e.g. during the prescribed regular inspection.The hexagon socket bolt cannot be removed from the ring.Type B is suitable for assembly without the need to use tools: inserting the spanner in the hexagon socket of the bolt allows the bolt to be turned in and out by hand.En savoir plusVis nominale (M) Longueur L (mm) Matériau Forme d'embout Niveau de résistance (acier) Type de filetage Unité de vente Application Norme technique M 8 - - - - - - - - Configurer maintenantPrix HT (hors TVA) :84.46 €～Prix HT (hors TVA) :Prix spécialJour d’expédition pevue :7 jours ouvrables
- Remise sur volume
GANTER
Lifting eye bolts, Stainless Steel A2
The following guidelines for Stainless Steel-Lifting eye bolts DIN 580 have to be observed in addition to the load values given in the above table.The eye bolt must be of fully screwed in to achieve a perfect contact between the two mating faces.Both threads must be of a equal length and the base material of equal strength to that of the bolt.Operating instructions with more details and specifications are included with every delivery (see also www.ganter-griff.com/service).The official DIN standard sheet specifies the additional sizes M42, M48, M56, M64, M72 x 6, M80 x 6 und M100 x 6.En savoir plusVis nominale (M) Longueur L (mm) Matériau Forme d'embout Niveau de résistance (acier) Type de filetage Unité de vente Application Norme technique M 8 - Acier inoxydable - - - - - - Configurer maintenantPrix HT (hors TVA) :5.68 €Jour d’expédition pevue :Article en stock : 1 jour ouvrablePossibilité d’expédition le jour même
- Remise sur volume
GANTER
Lifting eye nuts (rotating), Steel
Lifting eye nuts GN 583 are mounted in rotating bearings, allowing the direction of the force action to be adjusted and preventing inadvertent loosening or overturning (as potentially possible in lifting eye nuts DIN 582).Lifting eye nuts GN 583 offer a high load carrying capacity and they are tested to meet safety standards (safety factor 4).The rated load carrying capacity listed in the above table is clearly marked on the ring. It applies to the most unfavourable load application of the load types listed opposite.Lifting eye nuts GN 583 comply with Mechanical Engineering Directive 2006 / 42 / EG and are BG tested.The integrated RFID transponder clearly marks and identifies the sling and lifting gear, e.g. during the prescribed regular inspection.The hexagon socket nut cannot be removed from the ring.En savoir plusVis nominale (M) Longueur L (mm) Matériau Forme d'embout Niveau de résistance (acier) Type de filetage Unité de vente Application Norme technique M 8 - - - - - - - - Configurer maintenantPrix HT (hors TVA) :101.30 €Jour d’expédition pevue :7 jours ouvrables
- REMISE
- Remise sur volume
GANTER
Lifting eye nuts, Stainless Steel A2
The following guidelines of the Stainless Steel-Lifting eye nuts DIN 582 have to be observed in addition to the load values given in the above table.The eye nut must be of fully screwd in to achieve a perfect contact between the two mating faces.Both threads must be of a equal length and the base material of equal strength to that of the nut.Operating instructions with more details and specifications are included with every delivery (see also www.ganter-griff.com/service).The official DIN standard sheet specifies the additional sizes M42, M48, M56, M64, M72 x 6, M80 x 6 und M100 x 6.En savoir plusVis nominale (M) Longueur L (mm) Matériau Forme d'embout Niveau de résistance (acier) Type de filetage Unité de vente Application Norme technique M 8 - Acier inoxydable - - - - - - Configurer maintenantPrix HT (hors TVA) :5.96 €Prix HT (hors TVA) :Prix spécialJour d’expédition pevue :7 jours ouvrables