- Avis de Maintenance Préventive : Ce site sera indisponible en raison de la maintenance préventive de 3:00 21/4/2024 à 0:00 (CET) 22/4/2024. Nous nous excusons pour le désagrément.
Avec gravure（L dimension tolerance (Reference tolerance)：+0.01/0）
Selection Support: Straight Ejector Pins
- Technical information
- STRAIGHT EJECTOR PINS
?* À propos du délai d'expédition et des prix
-
Ejecteurs tubulaires / tête aplatie d'un côté / HSS / face gravée / diamètre de la tige, longueur configurable
MISUMI
- Fichiers CAD 2D / 3D disponibles
› Configurer maintenantDélai d'expédition minimum ： Devis
| Marque |
|---|
| Série du produit |
| CAD |
| à partir de∗ |
| Délai d'expédition minimum |
| Shape type |
| Material |
| Shaft diameter tolerance (Reference tolerance) |
| L dimension tolerance (Reference tolerance) |
| Surface treatment |
| Head thickness |
| D/P (Shaft diameter)(mm) |
| Tip shape |
| Gas release shape |
| Character engraving type |
| Number of engraving characters |
| |
| Marque | MISUMI |
| Série du produit | |
| CAD |
|
| à partir de∗ | - |
| Délai d'expédition minimum | Devis |
| Shape type | With engraving |
| Material | SKH51 |
| Shaft diameter tolerance (Reference tolerance) | 0/-0.002 |
| L dimension tolerance (Reference tolerance) | +0.01/0 |
| Surface treatment | No |
| Head thickness | 4mm(T4) |
| D/P (Shaft diameter)(mm) | 1 ～ 5 |
| Tip shape | No |
| Gas release shape | No |
| Character engraving type | Concave character / Concave character (Sequential numbering) |
| Number of engraving characters | 1 characters / 2 characters / 3 characters / 4 characters / 5 characters |
Loading...
Filtrer par :
-
Shape type
- With engraving
-
Material
- SKD61
- SKH51
-
Shaft diameter tolerance (Reference tolerance)
- -0.01/-0.02
- 0/-0.002
- 0/-0.005
- -0.01/-0.03
- -0.01/-0.04
-
L dimension tolerance (Reference tolerance)
- +0.01/0
- +0.02/0
- +0.05/0
- +0.02/0 or +0.05/0
-
Surface treatment
- No
- Nitrided
-
Head thickness
- 4mm(T4)
- 6mm(JIS)
- 8mm(JIS)
-
D/P (Shaft diameter)(mm)
- 0.3
- 0.4
- 0.5
- 0.6
- 0.7
- 0.8
- 0.9
- 1
- 1.1
- 1.2
- 1.3
- 1.4
- 1.5
- 1.6
- 1.7
- 1.8
- 1.9
- 2
- 2.1
- 2.2
- 2.3
- 2.4
- 2.5
- 2.6
- 2.7
- 2.8
- 2.9
- 3
- 3.1
- 3.2
- 3.3
- 3.4
- 3.5
- 3.6
- 3.7
- 3.8
- 3.9
- 4
- 4.1
- 4.2
- 4.3
- 4.4
- 4.5
- 4.6
- 4.7
- 4.8
- 4.9
- 5
- 5.1
- 5.2
- 5.3
- 5.4
- 5.5
- 5.6
- 5.7
- 5.8
- 5.9
- 6
- 6.1
- 6.2
- 6.3
- 6.4
- 6.5
- 7
- 8
- 9
- 10
- 12
- 13
- 15
- 16
- 20
- 25
[1-4.999/0.001mmunités]
-
Tip shape
-
Gas release shape
-
Character engraving type
- Concave character
- Concave character (Sequential numbering)
- Convex character
-
Number of engraving characters
- 1 characters
- 2 characters
- 3 characters
- 4 characters
- 5 characters
Fabricant
Type de données CAO
-
- 2D
- 3D
Mode de paiement
Fabrication à la demande
Certificats
Copyright © MISUMI Corporation All Rights Reserved.