One-Step


Données à afficher
30
45
60
Trier
  1. 1
Marque
Série du produit
à partir de
Délai de livraison minimum
Material
Surface treatment
Head thickness
Shaft diameter tolerance
Shape
D/P (Shaft diameter)(mm)
Step (Step shape)
Shape (Tip shape)
Applicable sleeve hole diameter tolerance
With/without cooling hole

    One-Step Center Pins With Cooling Hole -Die Steel SKD61+Nitriding/Shaft Diameter (D) Selection/Shaft Diameter Tolerance -0.01_-0.02 Type-

      One-Step Center Pins -Die Steel SKD61+Nitriding/Shaft Diameter (D) Selection/Shaft Diameter Tolerance -0.01_-0.02 Type-

        One-Step Center Pins -High Speed Steel SKH51/Shaft Diameter (D) Selection/Shaft Diameter Tolerance 0_-0.005 Type-

          One-Step Center Pins -High Speed Steel SKH51/Shaft Diameter (D) Selection/Shaft Diameter Tolerance -0.01_-0.02 Type-

            One-Step Center Pins -Die Steel SKD61/4mm Head/Shaft Diameter (D) Selection Type-

              One-Step Center Pins -Die Steel SKD61/4mm Head/Shaft Diameter (P) Designation (0.01mm Increments) Type-

                One-Step Center Pins -High Speed Steel SKH51/Shaft Diameter (P) Designation (0.01mm Increments)/Shaft Diameter Tolerance -0.01_-0.02 Type-

                  One-Step Center Pins -Die Steel SKD61+Nitriding/Shaft Diameter (P) Designation (0.01mm Increments)/Shaft Diameter Tolerance -0.01_-0.02 Type-

                    Stepped One-Step Center Pins -High Speed Steel SKH51/Shaft Diameter (P) Designation (0.01mm Increments) Type-

                      Stepped One-Step Center Pins -Die Steel SKD61+Nitriding/Shaft Diameter (P) Designation (0.01mm Increments) Type-

                        One-Step Center Pins -High Speed Steel SKH51/Shaft Diameter (P) Designation (0.01mm Increments)/Shaft Diameter Tolerance 0_-0.005 Type-

                        Marque

                        MISUMI

                        MISUMI

                        MISUMI

                        MISUMI

                        MISUMI

                        MISUMI

                        MISUMI

                        MISUMI

                        MISUMI

                        MISUMI

                        MISUMI

                        Série du produit

                        One-Step Center Pins With Cooling Hole -Die Steel SKD61+Nitriding/Shaft Diameter (D) Selection/Shaft Diameter Tolerance -0.01_-0.02 Type-

                        One-Step Center Pins -Die Steel SKD61+Nitriding/Shaft Diameter (D) Selection/Shaft Diameter Tolerance -0.01_-0.02 Type-

                        One-Step Center Pins -High Speed Steel SKH51/Shaft Diameter (D) Selection/Shaft Diameter Tolerance 0_-0.005 Type-

                        One-Step Center Pins -High Speed Steel SKH51/Shaft Diameter (D) Selection/Shaft Diameter Tolerance -0.01_-0.02 Type-

                        One-Step Center Pins -Die Steel SKD61/4mm Head/Shaft Diameter (D) Selection Type-

                        One-Step Center Pins -Die Steel SKD61/4mm Head/Shaft Diameter (P) Designation (0.01mm Increments) Type-

                        One-Step Center Pins -High Speed Steel SKH51/Shaft Diameter (P) Designation (0.01mm Increments)/Shaft Diameter Tolerance -0.01_-0.02 Type-

                        One-Step Center Pins -Die Steel SKD61+Nitriding/Shaft Diameter (P) Designation (0.01mm Increments)/Shaft Diameter Tolerance -0.01_-0.02 Type-

                        Stepped One-Step Center Pins -High Speed Steel SKH51/Shaft Diameter (P) Designation (0.01mm Increments) Type-

                        Stepped One-Step Center Pins -Die Steel SKD61+Nitriding/Shaft Diameter (P) Designation (0.01mm Increments) Type-

                        One-Step Center Pins -High Speed Steel SKH51/Shaft Diameter (P) Designation (0.01mm Increments)/Shaft Diameter Tolerance 0_-0.005 Type-

                        à partir de

                        -

                        -

                        -

                        -

                        -

                        -

                        -

                        -

                        -

                        -

                        -

                        Délai de livraison minimum Devis Devis Devis Devis Devis Devis Devis Devis Devis Devis Devis
                        MaterialSKD61SKD61SKH51SKH51SKD61SKD61SKH51SKD61SKH51SKD61SKH51
                        Surface treatmentNitridedNitridedNoNoNoNoNoNitridedNoNitridedNo
                        Head thickness4mm(T4) / 6mm(JIS) / 8mm(JIS)4mm(T4) / 6mm(JIS) / 8mm(JIS) / 4mm(JIS)4mm(T4) / 6mm(JIS) / 8mm(JIS) / 4mm(JIS)4mm(T4) / 6mm(JIS) / 8mm(JIS) / 4mm(JIS)4mm(T4)4mm(T4)4mm(T4) / 6mm(JIS) / 8mm(JIS) / 4mm(JIS)4mm(T4) / 6mm(JIS) / 8mm(JIS) / 4mm(JIS)4mm(T4) / 6mm(JIS) / 8mm(JIS) / 4mm(JIS)4mm(T4) / 6mm(JIS) / 8mm(JIS) / 4mm(JIS)4mm(T4) / 6mm(JIS) / 8mm(JIS) / 4mm(JIS)
                        Shaft diameter tolerance-0.01/-0.02 (Reference tolerance)-0.01/-0.02 (Reference tolerance)0/-0.005-0.01/-0.020/-0.005 / -0.01/-0.020/-0.005 / -0.01/-0.02-0.01/-0.02-0.01/-0.02 (Reference tolerance)0/-0.005-0.01/-0.02 (Reference tolerance)0/-0.005
                        ShapeOne-stepOne-stepOne-stepOne-stepOne-stepOne-stepOne-stepOne-stepStepped one-stepStepped one-stepOne-step
                        D/P (Shaft diameter)(mm)6 ~ 161.5 ~ 161 ~ 121 ~ 121.5 ~ 121 ~ 11.990.8 ~ 11.991.5 ~ 200.8 ~ 11.991.5 ~ 15.990.8 ~ 11.99
                        Step (Step shape)A / B / C / D / EA / B / C / D / EA / B / C / D / EA / B / C / D / EA / B / C / D / EA / B / C / D / EA / B / C / D / EA / B / C / D / EA / B / C / D / EA / B / C / D / EA / B / C / D / E
                        Shape (Tip shape)No processing / C / G / T / R / BNo processing / C / G / T / R / BNo processing / C / G / T / R / BNo processing / C / G / T / R / BNo processing / C / G / T / R / BNo processing / C / G / T / R / BNo processing / C / G / T / R / BNo processing / C / G / T / R / B--No processing / C / G / T / R / B
                        Applicable sleeve hole diameter tolerance+0.01/0 or H7+0.01/0 or H7+0.005/0+0.01/0 or H7+0.005/0 / +0.01/0 or H7+0.005/0 / +0.01/0 or H7+0.01/0 or H7+0.01/0 or H7+0.005/0+0.01/0 or H7+0.005/0
                        With/without cooling holeYesNoNoNoNoNoNoNoNoNoNo

                        Loading...

                        1. 1

                        Catégories relatives à One-Step