Ejecteurs tubulaires / tête aplatie d'un côté / EN 1.3343 Equiv. / front gravé / longueur configurable
Référence pièce
Vous pouvez trouver ici le numéro
de référence lié au produit recherché.
- Dessin
- Aperçu 3D L'aperçu 3D est disponible après la configuration complète
- Numéros de référence
- Catalogue
Numéro de référence :
- Afin d'afficher l'aperçu 3D, merci de configurer votre pièce
L'aperçu 3D n'est pas disponible, car aucun code article n'a été généré.
Loading...
| Référence pièce | Quantité minimale de commande | Remise sur volume | RoHS | Shaft diameter tolerance (Reference tolerance) | L dimension tolerance (Reference tolerance) | Head thickness | D/P (Shaft diameter) (mm) | Character engraving type | Number of engraving characters | L (L dimension) (mm) | Engraving character designation | |
|---|---|---|---|---|---|---|---|---|---|---|---|---|
| 1 | Devis | 10 | 0/-0.005 | +0.02/0 or +0.05/0 | 4mm(T4) | 4.5 | Concave character | 5 characters | 40 ～ 250 | ※Designation by WOS | ||
| 1 | Devis | 10 | 0/-0.005 | +0.02/0 or +0.05/0 | 4mm(T4) | 5 | Concave character | 5 characters | 40 ～ 250 | ※Designation by WOS | ||
| 1 | Devis | 10 | 0/-0.005 | +0.02/0 or +0.05/0 | 4mm(T4) | 5.5 | Concave character | 5 characters | 40 ～ 250 | ※Designation by WOS | ||
| 1 | Devis | 10 | 0/-0.005 | +0.02/0 or +0.05/0 | 4mm(T4) | 6 | Concave character | 5 characters | 40 ～ 250 | ※Designation by WOS | ||
| 1 | Devis | 10 | 0/-0.005 | +0.02/0 or +0.05/0 | 4mm(T4) | 6.5 | Concave character | 5 characters | 40 ～ 250 | ※Designation by WOS | ||
| 1 | Devis | 10 | 0/-0.005 | +0.02/0 or +0.05/0 | 4mm(T4) | 7 | Concave character | 5 characters | 40 ～ 250 | ※Designation by WOS | ||
| 1 | Devis | 10 | 0/-0.005 | +0.02/0 or +0.05/0 | 4mm(T4) | 8 | Concave character | 5 characters | 40 ～ 250 | ※Designation by WOS | ||
| 1 | Devis | 10 | 0/-0.005 | +0.02/0 or +0.05/0 | 4mm(T4) | 9 | Concave character | 5 characters | 40 ～ 250 | ※Designation by WOS | ||
| 1 | Devis | 10 | 0/-0.005 | +0.02/0 or +0.05/0 | 4mm(T4) | 10 | Concave character | 5 characters | 40 ～ 250 | ※Designation by WOS | ||
| 1 | Devis | 10 | 0/-0.005 | +0.02/0 or +0.05/0 | 4mm(T4) | 12 | Concave character | 5 characters | 40 ～ 250 | ※Designation by WOS | ||
| 1 | Devis | 10 | -0.01/-0.02 | +0.02/0 or +0.05/0 | 4mm(T4) | 4.5 | Concave character | 5 characters | 40 ～ 250 | ※Designation by WOS | ||
| 1 | Devis | 10 | -0.01/-0.02 | +0.02/0 or +0.05/0 | 4mm(T4) | 5 | Concave character | 5 characters | 40 ～ 250 | ※Designation by WOS | ||
| 1 | Devis | 10 | -0.01/-0.02 | +0.02/0 or +0.05/0 | 4mm(T4) | 5.5 | Concave character | 5 characters | 40 ～ 250 | ※Designation by WOS | ||
| 1 | Devis | 10 | -0.01/-0.02 | +0.02/0 or +0.05/0 | 4mm(T4) | 6 | Concave character | 5 characters | 40 ～ 250 | ※Designation by WOS | ||
| 1 | Devis | 10 | -0.01/-0.02 | +0.02/0 or +0.05/0 | 4mm(T4) | 6.5 | Concave character | 5 characters | 40 ～ 250 | ※Designation by WOS | ||
| 1 | Devis | 10 | -0.01/-0.02 | +0.02/0 or +0.05/0 | 4mm(T4) | 7 | Concave character | 5 characters | 40 ～ 250 | ※Designation by WOS | ||
| 1 | Devis | 10 | -0.01/-0.02 | +0.02/0 or +0.05/0 | 4mm(T4) | 8 | Concave character | 5 characters | 40 ～ 250 | ※Designation by WOS | ||
| 1 | Devis | 10 | -0.01/-0.02 | +0.02/0 or +0.05/0 | 4mm(T4) | 9 | Concave character | 5 characters | 40 ～ 250 | ※Designation by WOS | ||
| 1 | Devis | 10 | -0.01/-0.02 | +0.02/0 or +0.05/0 | 4mm(T4) | 10 | Concave character | 5 characters | 40 ～ 250 | ※Designation by WOS | ||
| 1 | Devis | 10 | -0.01/-0.02 | +0.02/0 or +0.05/0 | 4mm(T4) | 12 | Concave character | 5 characters | 40 ～ 250 | ※Designation by WOS | ||
| 1 | Devis | 10 | 0/-0.005 | +0.02/0 or +0.05/0 | 6mm(JIS) | 4.5 | Concave character | 5 characters | 40 ～ 250 | ※Designation by WOS | ||
| 1 | Devis | 10 | 0/-0.005 | +0.02/0 or +0.05/0 | 6mm(JIS) | 5 | Concave character | 5 characters | 40 ～ 250 | ※Designation by WOS | ||
| 1 | Devis | 10 | 0/-0.005 | +0.02/0 or +0.05/0 | 6mm(JIS) | 5.5 | Concave character | 5 characters | 40 ～ 250 | ※Designation by WOS | ||
| 1 | Devis | 10 | 0/-0.005 | +0.02/0 or +0.05/0 | 6mm(JIS) | 6 | Concave character | 5 characters | 40 ～ 250 | ※Designation by WOS | ||
| 1 | Devis | 10 | 0/-0.005 | +0.02/0 or +0.05/0 | 6mm(JIS) | 6.5 | Concave character | 5 characters | 40 ～ 250 | ※Designation by WOS | ||
| 1 | Devis | 10 | 0/-0.005 | +0.02/0 or +0.05/0 | 6mm(JIS) | 7 | Concave character | 5 characters | 40 ～ 250 | ※Designation by WOS | ||
| 1 | Devis | 10 | 0/-0.005 | +0.02/0 or +0.05/0 | 8mm(JIS) | 8 | Concave character | 5 characters | 40 ～ 250 | ※Designation by WOS | ||
| 1 | Devis | 10 | 0/-0.005 | +0.02/0 or +0.05/0 | 8mm(JIS) | 9 | Concave character | 5 characters | 40 ～ 250 | ※Designation by WOS | ||
| 1 | Devis | 10 | 0/-0.005 | +0.02/0 or +0.05/0 | 8mm(JIS) | 10 | Concave character | 5 characters | 40 ～ 250 | ※Designation by WOS | ||
| 1 | Devis | 10 | 0/-0.005 | +0.02/0 or +0.05/0 | 8mm(JIS) | 12 | Concave character | 5 characters | 40 ～ 250 | ※Designation by WOS | ||
| 1 | Devis | 10 | -0.01/-0.02 | +0.02/0 or +0.05/0 | 6mm(JIS) | 4.5 | Concave character | 5 characters | 40 ～ 250 | ※Designation by WOS | ||
| 1 | Devis | 10 | -0.01/-0.02 | +0.02/0 or +0.05/0 | 6mm(JIS) | 5 | Concave character | 5 characters | 40 ～ 250 | ※Designation by WOS | ||
| 1 | Devis | 10 | -0.01/-0.02 | +0.02/0 or +0.05/0 | 6mm(JIS) | 5.5 | Concave character | 5 characters | 40 ～ 250 | ※Designation by WOS | ||
| 1 | Devis | 10 | -0.01/-0.02 | +0.02/0 or +0.05/0 | 6mm(JIS) | 6 | Concave character | 5 characters | 40 ～ 250 | ※Designation by WOS | ||
| 1 | Devis | 10 | -0.01/-0.02 | +0.02/0 or +0.05/0 | 6mm(JIS) | 6.5 | Concave character | 5 characters | 40 ～ 250 | ※Designation by WOS | ||
| 1 | Devis | 10 | -0.01/-0.02 | +0.02/0 or +0.05/0 | 6mm(JIS) | 7 | Concave character | 5 characters | 40 ～ 250 | ※Designation by WOS | ||
| 1 | Devis | 10 | -0.01/-0.02 | +0.02/0 or +0.05/0 | 8mm(JIS) | 8 | Concave character | 5 characters | 40 ～ 250 | ※Designation by WOS | ||
| 1 | Devis | 10 | -0.01/-0.02 | +0.02/0 or +0.05/0 | 8mm(JIS) | 9 | Concave character | 5 characters | 40 ～ 250 | ※Designation by WOS | ||
| 1 | Devis | 10 | -0.01/-0.02 | +0.02/0 or +0.05/0 | 8mm(JIS) | 10 | Concave character | 5 characters | 40 ～ 250 | ※Designation by WOS | ||
| 1 | Devis | 10 | -0.01/-0.02 | +0.02/0 or +0.05/0 | 8mm(JIS) | 12 | Concave character | 5 characters | 40 ～ 250 | ※Designation by WOS |
Loading...
Informations de base
| Shape type | With engraving | Material | EN 1.3343 Equiv. | Surface treatment | No |
|---|---|---|---|---|---|
| Tip shape | No | Gas release shape | No |
Configurer
Propriétés de base
-
Shaft diameter tolerance (Reference tolerance)
- -0.01/-0.02
- 0/-0.005
-
L dimension tolerance (Reference tolerance)
- +0.02/0
- +0.02/0 or +0.05/0
-
Head thickness
- 4mm(T4)
- 6mm(JIS)
- 8mm(JIS)
-
D/P (Shaft diameter)(mm)
-
Character engraving type
- Concave character
- Concave character (Sequential numbering)
-
L (L dimension)(mm)
-
Engraving character designation
- ※Designation by WOS
-
Type
- EPH1M
- EPH1MR
- EPH2M
- EPH2MR
- EPH3M
- EPH4M
- EPH5M
- EPHE1M
- EPHE1MR
- EPHE2M
- EPHE2MR
- EPHE3M
- EPHE4M
- EPHE5M
- EPHJ1M
- EPHJ1MR
- EPHJ2M
- EPHJ2MR
- EPHJ3M
- EPHJ4M
- EPHJ5M
- EPHJE1M
- EPHJE1MR
- EPHJE2M
- EPHJE2MR
- EPHJE3M
- EPHJE4M
- EPHJE5M
-
Number of engraving characters
- 1 characters
- 2 characters
- 3 characters
- 4 characters
- 5 characters
-
Filtrer par type de données CAO
- 2D
- 3D
Propriétés optionnelles
- Les spécifications et les dimensions de certaines pièces peuvent ne pas être intégralement indiquées. Pour plus de détails, reportez-vous aux catalogues des fabricants .
Assistance technique
Mode de paiement
Fabrication à la demande
Certificats
Copyright © MISUMI Corporation All Rights Reserved.