• Marques
  • Société
  • Contact
FR
Type Code Seach | *NOT READY*
#CODE
Suggestion de mots-clés
Suggestions de numéros d'articles
Produits discontinués

Ejecteurs tubulaires / tête aplatie d'un côté / EN 1.3343 Equiv. / front gravé / longueur configurable (Numéros de référence - Téléchargement CAO)

Ejecteurs tubulaires / tête aplatie d'un côté / EN 1.3343 Equiv. / front gravé / longueur configurable

MISUMI

MISUMI

Fiche technique

Référence pièce

Vous pouvez trouver ici le numéro
de référence lié au produit recherché.

Numéro de référence :  

    L'aperçu 3D n'est pas disponible, car aucun code article n'a été généré.

  • Afin d'afficher l'aperçu 3D, merci de configurer votre pièce
Loading...

Connexion nécessaire pour visualiser l'aperçu 3D

Téléchargement CAO

Données à afficher
30
45
60
  1. << Précédent
  2. 1
  3. 2
  4. 3
  5. 4
  6. 5
  7. Suivant >>
Référence pièce
EPH2M3.9-[40-200/0.01]-**
EPH2M4-[40-250/0.01]-**
EPH2M4.5-[40-250/0.01]-**
EPH2M5-[40-250/0.01]-**
EPH2M5.5-[40-250/0.01]-**
EPH2M6-[40-250/0.01]-**
EPH2M6.5-[40-250/0.01]-**
EPH2M7-[40-250/0.01]-**
EPH2M8-[40-250/0.01]-**
EPH2M9-[40-250/0.01]-**
EPH2M10-[40-250/0.01]-**
EPH2M12-[40-250/0.01]-**
EPH2MR1.5-[40-250/0.01]-**
EPH2MR1.6-[40-250/0.01]-**
EPH2MR1.7-[40-200/0.01]-**
EPH2MR1.8-[40-200/0.01]-**
EPH2MR1.9-[40-200/0.01]-**
EPH2MR2-[40-250/0.01]-**
EPH2MR2.1-[40-250/0.01]-**
EPH2MR2.2-[40-200/0.01]-**
EPH2MR2.3-[40-200/0.01]-**
EPH2MR2.4-[40-200/0.01]-**
EPH2MR2.5-[40-250/0.01]-**
EPH2MR2.6-[40-250/0.01]-**
EPH2MR2.7-[40-200/0.01]-**
EPH2MR2.8-[40-200/0.01]-**
EPH2MR2.9-[40-200/0.01]-**
EPH2MR3-[40-250/0.01]-**
EPH2MR3.1-[40-250/0.01]-**
EPH2MR3.2-[40-200/0.01]-**
EPH2MR3.3-[40-200/0.01]-**
EPH2MR3.4-[40-200/0.01]-**
EPH2MR3.5-[40-250/0.01]-**
EPH2MR3.6-[40-250/0.01]-**
EPH2MR3.7-[40-200/0.01]-**
EPH2MR3.8-[40-200/0.01]-**
EPH2MR3.9-[40-200/0.01]-**
EPH2MR4-[40-250/0.01]-**
EPH2MR4.5-[40-250/0.01]-**
EPH2MR5-[40-250/0.01]-**
EPH2MR5.5-[40-250/0.01]-**
EPH2MR6-[40-250/0.01]-**
EPH2MR6.5-[40-250/0.01]-**
EPH2MR7-[40-250/0.01]-**
EPH2MR8-[40-250/0.01]-**
EPH2MR9-[40-250/0.01]-**
EPH2MR10-[40-250/0.01]-**
EPH2MR12-[40-250/0.01]-**
EPH3M2.8-[40-200/0.01]-***
EPH3M2.9-[40-200/0.01]-***
EPH3M3-[40-250/0.01]-***
EPH3M3.1-[40-250/0.01]-***
EPH3M3.2-[40-200/0.01]-***
EPH3M3.3-[40-200/0.01]-***
EPH3M3.4-[40-200/0.01]-***
EPH3M3.5-[40-250/0.01]-***
EPH3M3.6-[40-250/0.01]-***
EPH3M3.7-[40-200/0.01]-***
EPH3M3.8-[40-200/0.01]-***
EPH3M3.9-[40-200/0.01]-***
Référence pièce
Prix unitaire standard
Quantité minimale de commandeRemise sur volume
Jour
d'expédition standard
?
RoHSShaft diameter tolerance (Reference tolerance) L dimension tolerance (Reference tolerance) Head thickness D/P (Shaft diameter)
(mm) 		Character engraving type Number of engraving characters L (L dimension)
(mm) 		Engraving character designation

-

1 Devis 100/-0.005+0.02/04mm(T4)3.9Concave character2 characters40 ～ 200※Designation by WOS

-

1 Devis 100/-0.005+0.02/0 or +0.05/04mm(T4)4Concave character2 characters40 ～ 250※Designation by WOS

-

1 Devis 100/-0.005+0.02/0 or +0.05/04mm(T4)4.5Concave character2 characters40 ～ 250※Designation by WOS

-

1 Devis 100/-0.005+0.02/0 or +0.05/04mm(T4)5Concave character2 characters40 ～ 250※Designation by WOS

-

1 Devis 100/-0.005+0.02/0 or +0.05/04mm(T4)5.5Concave character2 characters40 ～ 250※Designation by WOS

-

1 Devis 100/-0.005+0.02/0 or +0.05/04mm(T4)6Concave character2 characters40 ～ 250※Designation by WOS

-

1 Devis 100/-0.005+0.02/0 or +0.05/04mm(T4)6.5Concave character2 characters40 ～ 250※Designation by WOS

-

1 Devis 100/-0.005+0.02/0 or +0.05/04mm(T4)7Concave character2 characters40 ～ 250※Designation by WOS

-

1 Devis 100/-0.005+0.02/0 or +0.05/04mm(T4)8Concave character2 characters40 ～ 250※Designation by WOS

-

1 Devis 100/-0.005+0.02/0 or +0.05/04mm(T4)9Concave character2 characters40 ～ 250※Designation by WOS

-

1 Devis 100/-0.005+0.02/0 or +0.05/04mm(T4)10Concave character2 characters40 ～ 250※Designation by WOS

-

1 Devis 100/-0.005+0.02/0 or +0.05/04mm(T4)12Concave character2 characters40 ～ 250※Designation by WOS

-

1 Devis 100/-0.005+0.02/0 or +0.05/04mm(T4)1.5Concave character (Sequential numbering)2 characters40 ～ 250※Designation by WOS

-

1 Devis 100/-0.005+0.02/0 or +0.05/04mm(T4)1.6Concave character (Sequential numbering)2 characters40 ～ 250※Designation by WOS

-

1 Devis 100/-0.005+0.02/04mm(T4)1.7Concave character (Sequential numbering)2 characters40 ～ 200※Designation by WOS

-

1 Devis 100/-0.005+0.02/04mm(T4)1.8Concave character (Sequential numbering)2 characters40 ～ 200※Designation by WOS

-

1 Devis 100/-0.005+0.02/04mm(T4)1.9Concave character (Sequential numbering)2 characters40 ～ 200※Designation by WOS

-

1 Devis 100/-0.005+0.02/0 or +0.05/04mm(T4)2Concave character (Sequential numbering)2 characters40 ～ 250※Designation by WOS

-

1 Devis 100/-0.005+0.02/0 or +0.05/04mm(T4)2.1Concave character (Sequential numbering)2 characters40 ～ 250※Designation by WOS

-

1 Devis 100/-0.005+0.02/04mm(T4)2.2Concave character (Sequential numbering)2 characters40 ～ 200※Designation by WOS

-

1 Devis 100/-0.005+0.02/04mm(T4)2.3Concave character (Sequential numbering)2 characters40 ～ 200※Designation by WOS

-

1 Devis 100/-0.005+0.02/04mm(T4)2.4Concave character (Sequential numbering)2 characters40 ～ 200※Designation by WOS

-

1 Devis 100/-0.005+0.02/0 or +0.05/04mm(T4)2.5Concave character (Sequential numbering)2 characters40 ～ 250※Designation by WOS

-

1 Devis 100/-0.005+0.02/0 or +0.05/04mm(T4)2.6Concave character (Sequential numbering)2 characters40 ～ 250※Designation by WOS

-

1 Devis 100/-0.005+0.02/04mm(T4)2.7Concave character (Sequential numbering)2 characters40 ～ 200※Designation by WOS

-

1 Devis 100/-0.005+0.02/04mm(T4)2.8Concave character (Sequential numbering)2 characters40 ～ 200※Designation by WOS

-

1 Devis 100/-0.005+0.02/04mm(T4)2.9Concave character (Sequential numbering)2 characters40 ～ 200※Designation by WOS

-

1 Devis 100/-0.005+0.02/0 or +0.05/04mm(T4)3Concave character (Sequential numbering)2 characters40 ～ 250※Designation by WOS

-

1 Devis 100/-0.005+0.02/0 or +0.05/04mm(T4)3.1Concave character (Sequential numbering)2 characters40 ～ 250※Designation by WOS

-

1 Devis 100/-0.005+0.02/04mm(T4)3.2Concave character (Sequential numbering)2 characters40 ～ 200※Designation by WOS

-

1 Devis 100/-0.005+0.02/04mm(T4)3.3Concave character (Sequential numbering)2 characters40 ～ 200※Designation by WOS

-

1 Devis 100/-0.005+0.02/04mm(T4)3.4Concave character (Sequential numbering)2 characters40 ～ 200※Designation by WOS

-

1 Devis 100/-0.005+0.02/0 or +0.05/04mm(T4)3.5Concave character (Sequential numbering)2 characters40 ～ 250※Designation by WOS

-

1 Devis 100/-0.005+0.02/0 or +0.05/04mm(T4)3.6Concave character (Sequential numbering)2 characters40 ～ 250※Designation by WOS

-

1 Devis 100/-0.005+0.02/04mm(T4)3.7Concave character (Sequential numbering)2 characters40 ～ 200※Designation by WOS

-

1 Devis 100/-0.005+0.02/04mm(T4)3.8Concave character (Sequential numbering)2 characters40 ～ 200※Designation by WOS

-

1 Devis 100/-0.005+0.02/04mm(T4)3.9Concave character (Sequential numbering)2 characters40 ～ 200※Designation by WOS

-

1 Devis 100/-0.005+0.02/0 or +0.05/04mm(T4)4Concave character (Sequential numbering)2 characters40 ～ 250※Designation by WOS

-

1 Devis 100/-0.005+0.02/0 or +0.05/04mm(T4)4.5Concave character (Sequential numbering)2 characters40 ～ 250※Designation by WOS

-

1 Devis 100/-0.005+0.02/0 or +0.05/04mm(T4)5Concave character (Sequential numbering)2 characters40 ～ 250※Designation by WOS

-

1 Devis 100/-0.005+0.02/0 or +0.05/04mm(T4)5.5Concave character (Sequential numbering)2 characters40 ～ 250※Designation by WOS

-

1 Devis 100/-0.005+0.02/0 or +0.05/04mm(T4)6Concave character (Sequential numbering)2 characters40 ～ 250※Designation by WOS

-

1 Devis 100/-0.005+0.02/0 or +0.05/04mm(T4)6.5Concave character (Sequential numbering)2 characters40 ～ 250※Designation by WOS

-

1 Devis 100/-0.005+0.02/0 or +0.05/04mm(T4)7Concave character (Sequential numbering)2 characters40 ～ 250※Designation by WOS

-

1 Devis 100/-0.005+0.02/0 or +0.05/04mm(T4)8Concave character (Sequential numbering)2 characters40 ～ 250※Designation by WOS

-

1 Devis 100/-0.005+0.02/0 or +0.05/04mm(T4)9Concave character (Sequential numbering)2 characters40 ～ 250※Designation by WOS

-

1 Devis 100/-0.005+0.02/0 or +0.05/04mm(T4)10Concave character (Sequential numbering)2 characters40 ～ 250※Designation by WOS

-

1 Devis 100/-0.005+0.02/0 or +0.05/04mm(T4)12Concave character (Sequential numbering)2 characters40 ～ 250※Designation by WOS

-

1 Devis 100/-0.005+0.02/04mm(T4)2.8Concave character3 characters40 ～ 200※Designation by WOS

-

1 Devis 100/-0.005+0.02/04mm(T4)2.9Concave character3 characters40 ～ 200※Designation by WOS

-

1 Devis 100/-0.005+0.02/0 or +0.05/04mm(T4)3Concave character3 characters40 ～ 250※Designation by WOS

-

1 Devis 100/-0.005+0.02/0 or +0.05/04mm(T4)3.1Concave character3 characters40 ～ 250※Designation by WOS

-

1 Devis 100/-0.005+0.02/04mm(T4)3.2Concave character3 characters40 ～ 200※Designation by WOS

-

1 Devis 100/-0.005+0.02/04mm(T4)3.3Concave character3 characters40 ～ 200※Designation by WOS

-

1 Devis 100/-0.005+0.02/04mm(T4)3.4Concave character3 characters40 ～ 200※Designation by WOS

-

1 Devis 100/-0.005+0.02/0 or +0.05/04mm(T4)3.5Concave character3 characters40 ～ 250※Designation by WOS

-

1 Devis 100/-0.005+0.02/0 or +0.05/04mm(T4)3.6Concave character3 characters40 ～ 250※Designation by WOS

-

1 Devis 100/-0.005+0.02/04mm(T4)3.7Concave character3 characters40 ～ 200※Designation by WOS

-

1 Devis 100/-0.005+0.02/04mm(T4)3.8Concave character3 characters40 ～ 200※Designation by WOS

-

1 Devis 100/-0.005+0.02/04mm(T4)3.9Concave character3 characters40 ～ 200※Designation by WOS

Loading...

  1. << Précédent
  2. 1
  3. 2
  4. 3
  5. 4
  6. 5
  7. Suivant >>
 

Informations de base

Shape type With engraving Material EN 1.3343 Equiv. Surface treatment No
Tip shape No Gas release shape No

Configurer

Réinitialiser

584Numéro de référence applicable suggérée

Afficher les numéros de référence

Certaines spécifications ne sont pas encore précisées.
Le numéro de référence est identifié.

Propriétés de base

  • Shaft diameter tolerance (Reference tolerance)

    • -0.01/-0.02
    • 0/-0.005

    Réinitialiser

  • L dimension tolerance (Reference tolerance)

    • +0.02/0
    • +0.02/0 or +0.05/0

    Réinitialiser

  • Head thickness

    • 4mm(T4)
    • 6mm(JIS)
    • 8mm(JIS)

    Réinitialiser

  • D/P (Shaft diameter)(mm)

    • 0.3
    • 0.4
    • 0.5
    • 0.6
    • 0.7
    • 0.8
    • 0.9
    • 1
    • 1.1
    • 1.2
    • 1.3
    • 1.4
    • 1.5
    • 1.6
    • 1.7
    • 1.8
    • 1.9
    • 2
    • 2.1
    • 2.2
    • 2.3
    • 2.4
    • 2.5
    • 2.6
    • 2.7
    • 2.8
    • 2.9
    • 3
    • 3.1
    • 3.2
    • 3.3
    • 3.4
    • 3.5
    • 3.6
    • 3.7
    • 3.8
    • 3.9
    • 4
    • 4.5
    • 5
    • 5.5
    • 6
    • 6.5
    • 7
    • 8
    • 9
    • 10
    • 12

    Réinitialiser

  • Character engraving type

    • Concave character
    • Concave character (Sequential numbering)

    Réinitialiser

  • Number of engraving characters

    • 1 characters
    • 2 characters
    • 3 characters
    • 4 characters
    • 5 characters

    Réinitialiser

  • L (L dimension)(mm)

     [35-250/0.01mmunités]

    Réinitialiser

  • Engraving character designation

    • ※Designation by WOS

    Réinitialiser

  • Type

    • EPH1M
    • EPH1MR
    • EPH2M
    • EPH2MR
    • EPH3M
    • EPH4M
    • EPH5M
    • EPHE1M
    • EPHE1MR
    • EPHE2M
    • EPHE2MR
    • EPHE3M
    • EPHE4M
    • EPHE5M
    • EPHJ1M
    • EPHJ1MR
    • EPHJ2M
    • EPHJ2MR
    • EPHJ3M
    • EPHJ4M
    • EPHJ5M
    • EPHJE1M
    • EPHJE1MR
    • EPHJE2M
    • EPHJE2MR
    • EPHJE3M
    • EPHJE4M
    • EPHJE5M

    Réinitialiser

  • Filtrer par type de données CAO

    • 2D
    • 3D

    Réinitialiser

Propriétés optionnelles

Assistance technique

Question technique

Mode de paiement

  • Facture
  • Prépaiement
  • PayPal

Fabrication à la demande

Changer de vue

Certificats

  • ISO-9001
  • ISO-14001
  • AEO Certification
  • RoHS
  • REACH

MISUMI dans le monde

Social Media

Informations légales

Copyright © MISUMI Corporation All Rights Reserved.