Ejecteurs tubulaires / tête aplatie d'un côté / HSS / face gravée / diamètre de la tige, longueur configurable
Référence pièce
Vous pouvez trouver ici le numéro
de référence lié au produit recherché.
Numéro de référence :
- Afin d'afficher l'aperçu 3D, merci de configurer votre pièce
L'aperçu 3D n'est pas disponible, car aucun code article n'a été généré.
| Référence pièce | Quantité minimale de commande | Remise sur volume | RoHS | Shaft diameter tolerance (Reference tolerance) | L dimension tolerance (Reference tolerance) | Head thickness | D/P (Shaft diameter) (mm) | Character engraving type | Number of engraving characters | No. (Nominal diameter) (mm) | L (L dimension) (mm) | Engraving character designation | |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| 1 | Devis | 10 | 0/-0.005 | +0.02/0 | 4mm(T4) | 0.6 ～ 0.99 | Concave character | 1 characters | 0.6 | 40 ～ 100 | ※Designation by WOS | ||
| 1 | Devis | 10 | 0/-0.005 | +0.02/0 | 4mm(T4) | 0.6 ～ 0.99 | Concave character | 1 characters | 1 | 40 ～ 150 | ※Designation by WOS | ||
| 1 | Devis | 10 | 0/-0.005 | +0.02/0 | 4mm(T4) | 1 ～ 1.49 | Concave character | 1 characters | 1.5 | 40 ～ 200 | ※Designation by WOS | ||
| 1 | Devis | 10 | 0/-0.005 | +0.02/0 | 4mm(T4) | 0.4 ～ 0.59 | Concave character (Sequential numbering) | 1 characters | 0.6 | 40 ～ 150 | ※Designation by WOS | ||
| 1 | Devis | 10 | 0/-0.005 | +0.02/0 | 4mm(T4) | 0.6 ～ 0.99 | Concave character (Sequential numbering) | 1 characters | 1 | 40 ～ 150 | ※Designation by WOS | ||
| 1 | Devis | 10 | 0/-0.005 | +0.02/0 | 4mm(T4) | 1 ～ 1.49 | Concave character (Sequential numbering) | 1 characters | 1.5 | 40 ～ 200 | ※Designation by WOS | ||
| 1 | Devis | 10 | -0.01/-0.02 | +0.02/0 | 4mm(T4) | 0.6 ～ 0.99 | Concave character | 1 characters | 0.6 | 40 ～ 100 | ※Designation by WOS | ||
| 1 | Devis | 10 | -0.01/-0.02 | +0.02/0 | 4mm(T4) | 0.6 ～ 0.99 | Concave character | 1 characters | 1 | 40 ～ 150 | ※Designation by WOS | ||
| 1 | Devis | 10 | -0.01/-0.02 | +0.02/0 | 4mm(T4) | 1 ～ 1.49 | Concave character | 1 characters | 1.5 | 40 ～ 250 | ※Designation by WOS | ||
| 1 | Devis | 10 | -0.01/-0.02 | +0.02/0 | 4mm(T4) | 0.4 ～ 0.59 | Concave character (Sequential numbering) | 1 characters | 0.6 | 40 ～ 150 | ※Designation by WOS | ||
| 1 | Devis | 10 | -0.01/-0.02 | +0.02/0 | 4mm(T4) | 0.6 ～ 0.99 | Concave character (Sequential numbering) | 1 characters | 1 | 40 ～ 150 | ※Designation by WOS | ||
| 1 | Devis | 10 | -0.01/-0.02 | +0.02/0 | 4mm(T4) | 1 ～ 1.49 | Concave character (Sequential numbering) | 1 characters | 1.5 | 40 ～ 200 | ※Designation by WOS |
Loading...
Informations de base
| Shape type | With engraving | Material | SKH51 | Surface treatment | No |
|---|---|---|---|---|---|
| Tip shape | No | Gas release shape | No |
Configurer
Propriétés de base
-
Shaft diameter tolerance (Reference tolerance)
- -0.01/-0.02
- 0/-0.005
-
Head thickness
- 4mm(T4)
- 6mm(JIS)
- 8mm(JIS)
-
D/P (Shaft diameter)(mm)
-
Character engraving type
- Concave character
- Concave character (Sequential numbering)
-
Number of engraving characters
- 1 characters
- 2 characters
- 3 characters
- 4 characters
- 5 characters
-
No. (Nominal diameter)(mm)
-
L (L dimension)(mm)
-
Engraving character designation
- ※Designation by WOS
-
Type
- EPHB1M
- EPHB1MR
- EPHB2M
- EPHB2MR
- EPHB3M
- EPHB4M
- EPHB5M
- EPHBE1M
- EPHBE1MR
- EPHBE2M
- EPHBE2MR
- EPHBE3M
- EPHBE4M
- EPHBE5M
- EPHJB1M
- EPHJB1MR
- EPHJB2M
- EPHJB2MR
- EPHJB3M
- EPHJB4M
- EPHJB5M
- EPHJBE1M
- EPHJBE1MR
- EPHJBE2M
- EPHJBE2MR
- EPHJBE3M
- EPHJBE4M
- EPHJBE5M
-
L dimension tolerance (Reference tolerance)
- +0.02/0
- +0.02/0 or +0.05/0
-
Filtrer par type de données CAO
- 2D
- 3D
Propriétés optionnelles
- Les spécifications et les dimensions de certaines pièces peuvent ne pas être intégralement indiquées. Pour plus de détails, reportez-vous aux catalogues des fabricants .
Assistance technique
Mode de paiement
Fabrication à la demande
Certificats
Copyright © MISUMI Corporation All Rights Reserved.