• Marques
  • Société
  • Contact
FR
Type Code Seach | *NOT READY*
#CODE
Suggestion de mots-clés
Suggestions de numéros d'articles
Produits discontinués

Ejecteurs tubulaires / tête aplatie d'un côté / EN 1.3343 Equiv. / face gravée / diamètre de la tige, longueur configurable (Numéros de référence - Téléchargement CAO)

Ejecteurs tubulaires / tête aplatie d'un côté / EN 1.3343 Equiv. / face gravée / diamètre de la tige, longueur configurable

MISUMI

MISUMI

Fiche technique

Référence pièce

Vous pouvez trouver ici le numéro
de référence lié au produit recherché.

Numéro de référence :  

    L'aperçu 3D n'est pas disponible, car aucun code article n'a été généré.

  • Afin d'afficher l'aperçu 3D, merci de configurer votre pièce
Loading...

Connexion nécessaire pour visualiser l'aperçu 3D

Téléchargement CAO

Données à afficher
30
45
60
  1. << Précédent
  2. 1
  3. 2
  4. 3
  5. 4
  6. 5
  7. Suivant >>
Référence pièce
EPHBE1MR6-[40-250/0.01]-P[5.5-5.99/0.01]-*
EPHBE1MR6.5-[40-250/0.01]-P[6-6.49/0.01]-*
EPHBE1MR7-[40-250/0.01]-P[6.5-6.99/0.01]-*
EPHBE1MR8-[40-250/0.01]-P[7-7.99/0.01]-*
EPHBE1MR10-[40-250/0.01]-P[8-9.99/0.01]-*
EPHBE1MR12-[40-250/0.01]-P[10-11.99/0.01]-*
EPHBE2M2-[40-250/0.01]-P[1.5-1.99/0.01]-**
EPHBE2M2.5-[40-250/0.01]-P[2-2.49/0.01]-**
EPHBE2M3-[40-250/0.01]-P[2.5-2.99/0.01]-**
EPHBE2M3.5-[40-250/0.01]-P[3-3.49/0.01]-**
EPHBE2M4-[40-250/0.01]-P[3.5-3.99/0.01]-**
EPHBE2M4.5-[40-250/0.01]-P[4-4.49/0.01]-**
EPHBE2M5-[40-250/0.01]-P[4.5-4.99/0.01]-**
EPHBE2M5.5-[40-250/0.01]-P[5-5.49/0.01]-**
EPHBE2M6-[40-250/0.01]-P[5.5-5.99/0.01]-**
EPHBE2M6.5-[40-250/0.01]-P[6-6.49/0.01]-**
EPHBE2M7-[40-250/0.01]-P[6.5-6.99/0.01]-**
EPHBE2M8-[40-250/0.01]-P[7-7.99/0.01]-**
EPHBE2M10-[40-250/0.01]-P[8-9.99/0.01]-**
EPHBE2M12-[40-250/0.01]-P[10-11.99/0.01]-**
EPHBE2MR2-[40-250/0.01]-P[1.5-1.99/0.01]-**
EPHBE2MR2.5-[40-250/0.01]-P[2-2.49/0.01]-**
EPHBE2MR3-[40-250/0.01]-P[2.5-2.99/0.01]-**
EPHBE2MR3.5-[40-250/0.01]-P[3-3.49/0.01]-**
EPHBE2MR4-[40-250/0.01]-P[3.5-3.99/0.01]-**
EPHBE2MR4.5-[40-250/0.01]-P[4-4.49/0.01]-**
EPHBE2MR5-[40-250/0.01]-P[4.5-4.99/0.01]-**
EPHBE2MR5.5-[40-250/0.01]-P[5-5.49/0.01]-**
EPHBE2MR6-[40-250/0.01]-P[5.5-5.99/0.01]-**
EPHBE2MR6.5-[40-250/0.01]-P[6-6.49/0.01]-**
EPHBE2MR7-[40-250/0.01]-P[6.5-6.99/0.01]-**
EPHBE2MR8-[40-250/0.01]-P[7-7.99/0.01]-**
EPHBE2MR10-[40-250/0.01]-P[8-9.99/0.01]-**
EPHBE2MR12-[40-250/0.01]-P[10-11.99/0.01]-**
EPHBE3M3-[40-250/0.01]-P[2.8-2.99/0.01]-***
EPHBE3M3.5-[40-250/0.01]-P[3-3.49/0.01]-**
EPHBE3M3.5-[40-250/0.01]-P[3-3.49/0.01]-***
EPHBE3M4-[40-250/0.01]-P[3.5-3.99/0.01]-***
EPHBE3M4.5-[40-250/0.01]-P[4-4.49/0.01]-***
EPHBE3M5-[40-250/0.01]-P[4.5-4.99/0.01]-***
EPHBE3M5.5-[40-250/0.01]-P[5-5.49/0.01]-***
EPHBE3M6-[40-250/0.01]-P[5.5-5.99/0.01]-***
EPHBE3M6.5-[40-250/0.01]-P[6-6.49/0.01]-***
EPHBE3M7-[40-250/0.01]-P[6.5-6.99/0.01]-***
EPHBE3M8-[40-250/0.01]-P[7-7.99/0.01]-***
EPHBE3M10-[40-250/0.01]-P[8-9.99/0.01]-***
EPHBE3M12-[40-250/0.01]-P[10-11.99/0.01]-***
EPHBE4M4-[40-250/0.01]-P[3.6-3.99/0.01]-****
EPHBE4M4.5-[40-250/0.01]-P[4-4.49/0.01]-****
EPHBE4M5-[40-250/0.01]-P[4.5-4.99/0.01]-****
EPHBE4M5.5-[40-250/0.01]-P[5-5.49/0.01]-****
EPHBE4M6-[40-250/0.01]-P[5.5-5.99/0.01]-****
EPHBE4M6.5-[40-250/0.01]-P[6-6.49/0.01]-****
EPHBE4M7-[40-250/0.01]-P[6.5-6.99/0.01]-****
EPHBE4M8-[40-250/0.01]-P[7-7.99/0.01]-****
EPHBE4M10-[40-250/0.01]-P[8-9.99/0.01]-****
EPHBE4M12-[40-250/0.01]-P[10-11.99/0.01]-****
EPHBE5M5-[40-250/0.01]-P[4.5-4.99/0.01]-*****
EPHBE5M5.5-[40-250/0.01]-P[5-5.49/0.01]-*****
EPHBE5M6-[40-250/0.01]-P[5.5-5.99/0.01]-*****
Référence pièce
Prix unitaire standard
Quantité minimale de commandeRemise sur volume
Jour
d'expédition standard
?
RoHSShaft diameter tolerance (Reference tolerance) L dimension tolerance (Reference tolerance) Head thickness D/P (Shaft diameter)
(mm) 		Character engraving type Number of engraving characters No. (Nominal diameter)
(mm) 		L (L dimension)
(mm) 		Engraving character designation

-

1 Devis 10-0.01/-0.02+0.02/0 or +0.05/04mm(T4)5.5 ～ 5.99Concave character (Sequential numbering)1 characters640 ～ 250※Designation by WOS

-

1 Devis 10-0.01/-0.02+0.02/0 or +0.05/04mm(T4)6 ～ 6.49Concave character (Sequential numbering)1 characters6.540 ～ 250※Designation by WOS

-

1 Devis 10-0.01/-0.02+0.02/0 or +0.05/04mm(T4)6.5 ～ 6.99Concave character (Sequential numbering)1 characters740 ～ 250※Designation by WOS

-

1 Devis 10-0.01/-0.02+0.02/0 or +0.05/04mm(T4)7 ～ 7.99Concave character (Sequential numbering)1 characters840 ～ 250※Designation by WOS

-

1 Devis 10-0.01/-0.02+0.02/0 or +0.05/04mm(T4)8 ～ 9.99Concave character (Sequential numbering)1 characters1040 ～ 250※Designation by WOS

-

1 Devis 10-0.01/-0.02+0.02/0 or +0.05/04mm(T4)10 ～ 11.99Concave character (Sequential numbering)1 characters1240 ～ 250※Designation by WOS

-

1 Devis 10-0.01/-0.02+0.02/0 or +0.05/04mm(T4)1.5 ～ 1.99Concave character2 characters240 ～ 250※Designation by WOS

-

1 Devis 10-0.01/-0.02+0.02/0 or +0.05/04mm(T4)2 ～ 2.49Concave character2 characters2.540 ～ 250※Designation by WOS

-

1 Devis 10-0.01/-0.02+0.02/0 or +0.05/04mm(T4)2.5 ～ 2.99Concave character2 characters340 ～ 250※Designation by WOS

-

1 Devis 10-0.01/-0.02+0.02/0 or +0.05/04mm(T4)3 ～ 3.49Concave character2 characters3.540 ～ 250※Designation by WOS

-

1 Devis 10-0.01/-0.02+0.02/0 or +0.05/04mm(T4)3.5 ～ 3.99Concave character2 characters440 ～ 250※Designation by WOS

-

1 Devis 10-0.01/-0.02+0.02/0 or +0.05/04mm(T4)4 ～ 4.49Concave character2 characters4.540 ～ 250※Designation by WOS

-

1 Devis 10-0.01/-0.02+0.02/0 or +0.05/04mm(T4)4.5 ～ 4.99Concave character2 characters540 ～ 250※Designation by WOS

-

1 Devis 10-0.01/-0.02+0.02/0 or +0.05/04mm(T4)5 ～ 5.49Concave character2 characters5.540 ～ 250※Designation by WOS

-

1 Devis 10-0.01/-0.02+0.02/0 or +0.05/04mm(T4)5.5 ～ 5.99Concave character2 characters640 ～ 250※Designation by WOS

-

1 Devis 10-0.01/-0.02+0.02/0 or +0.05/04mm(T4)6 ～ 6.49Concave character2 characters6.540 ～ 250※Designation by WOS

-

1 Devis 10-0.01/-0.02+0.02/0 or +0.05/04mm(T4)6.5 ～ 6.99Concave character2 characters740 ～ 250※Designation by WOS

-

1 Devis 10-0.01/-0.02+0.02/0 or +0.05/04mm(T4)7 ～ 7.99Concave character2 characters840 ～ 250※Designation by WOS

-

1 Devis 10-0.01/-0.02+0.02/0 or +0.05/04mm(T4)8 ～ 9.99Concave character2 characters1040 ～ 250※Designation by WOS

-

1 Devis 10-0.01/-0.02+0.02/0 or +0.05/04mm(T4)10 ～ 11.99Concave character2 characters1240 ～ 250※Designation by WOS

-

1 Devis 10-0.01/-0.02+0.02/0 or +0.05/04mm(T4)1.5 ～ 1.99Concave character (Sequential numbering)2 characters240 ～ 250※Designation by WOS

-

1 Devis 10-0.01/-0.02+0.02/0 or +0.05/04mm(T4)2 ～ 2.49Concave character (Sequential numbering)2 characters2.540 ～ 250※Designation by WOS

-

1 Devis 10-0.01/-0.02+0.02/0 or +0.05/04mm(T4)2.5 ～ 2.99Concave character (Sequential numbering)2 characters340 ～ 250※Designation by WOS

-

1 Devis 10-0.01/-0.02+0.02/0 or +0.05/04mm(T4)3 ～ 3.49Concave character (Sequential numbering)2 characters3.540 ～ 250※Designation by WOS

-

1 Devis 10-0.01/-0.02+0.02/0 or +0.05/04mm(T4)3.5 ～ 3.99Concave character (Sequential numbering)2 characters440 ～ 250※Designation by WOS

-

1 Devis 10-0.01/-0.02+0.02/0 or +0.05/04mm(T4)4 ～ 4.49Concave character (Sequential numbering)2 characters4.540 ～ 250※Designation by WOS

-

1 Devis 10-0.01/-0.02+0.02/0 or +0.05/04mm(T4)4.5 ～ 4.99Concave character (Sequential numbering)2 characters540 ～ 250※Designation by WOS

-

1 Devis 10-0.01/-0.02+0.02/0 or +0.05/04mm(T4)5 ～ 5.49Concave character (Sequential numbering)2 characters5.540 ～ 250※Designation by WOS

-

1 Devis 10-0.01/-0.02+0.02/0 or +0.05/04mm(T4)5.5 ～ 5.99Concave character (Sequential numbering)2 characters640 ～ 250※Designation by WOS

-

1 Devis 10-0.01/-0.02+0.02/0 or +0.05/04mm(T4)6 ～ 6.49Concave character (Sequential numbering)2 characters6.540 ～ 250※Designation by WOS

-

1 Devis 10-0.01/-0.02+0.02/0 or +0.05/04mm(T4)6.5 ～ 6.99Concave character (Sequential numbering)2 characters740 ～ 250※Designation by WOS

-

1 Devis 10-0.01/-0.02+0.02/0 or +0.05/04mm(T4)7 ～ 7.99Concave character (Sequential numbering)2 characters840 ～ 250※Designation by WOS

-

1 Devis 10-0.01/-0.02+0.02/0 or +0.05/04mm(T4)8 ～ 9.99Concave character (Sequential numbering)2 characters1040 ～ 250※Designation by WOS

-

1 Devis 10-0.01/-0.02+0.02/0 or +0.05/04mm(T4)10 ～ 11.99Concave character (Sequential numbering)2 characters1240 ～ 250※Designation by WOS

-

1 Devis 10-0.01/-0.02+0.02/0 or +0.05/04mm(T4)2.8 ～ 2.99Concave character3 characters340 ～ 250※Designation by WOS

-

1 Devis 10-0.01/-0.02+0.02/0 or +0.05/04mm(T4)3 ～ 3.49Concave character3 characters3.540 ～ 250※Designation by WOS

-

1 Devis 10-0.01/-0.02+0.02/0 or +0.05/04mm(T4)3 ～ 3.49Concave character3 characters3.540 ～ 250※Designation by WOS

-

1 Devis 10-0.01/-0.02+0.02/0 or +0.05/04mm(T4)3.5 ～ 3.99Concave character3 characters440 ～ 250※Designation by WOS

-

1 Devis 10-0.01/-0.02+0.02/0 or +0.05/04mm(T4)4 ～ 4.49Concave character3 characters4.540 ～ 250※Designation by WOS

-

1 Devis 10-0.01/-0.02+0.02/0 or +0.05/04mm(T4)4.5 ～ 4.99Concave character3 characters540 ～ 250※Designation by WOS

-

1 Devis 10-0.01/-0.02+0.02/0 or +0.05/04mm(T4)5 ～ 5.49Concave character3 characters5.540 ～ 250※Designation by WOS

-

1 Devis 10-0.01/-0.02+0.02/0 or +0.05/04mm(T4)5.5 ～ 5.99Concave character3 characters640 ～ 250※Designation by WOS

-

1 Devis 10-0.01/-0.02+0.02/0 or +0.05/04mm(T4)6 ～ 6.49Concave character3 characters6.540 ～ 250※Designation by WOS

-

1 Devis 10-0.01/-0.02+0.02/0 or +0.05/04mm(T4)6.5 ～ 6.99Concave character3 characters740 ～ 250※Designation by WOS

-

1 Devis 10-0.01/-0.02+0.02/0 or +0.05/04mm(T4)7 ～ 7.99Concave character3 characters840 ～ 250※Designation by WOS

-

1 Devis 10-0.01/-0.02+0.02/0 or +0.05/04mm(T4)8 ～ 9.99Concave character3 characters1040 ～ 250※Designation by WOS

-

1 Devis 10-0.01/-0.02+0.02/0 or +0.05/04mm(T4)10 ～ 11.99Concave character3 characters1240 ～ 250※Designation by WOS

-

1 Devis 10-0.01/-0.02+0.02/0 or +0.05/04mm(T4)3.6 ～ 3.99Concave character4 characters440 ～ 250※Designation by WOS

-

1 Devis 10-0.01/-0.02+0.02/0 or +0.05/04mm(T4)4 ～ 4.49Concave character4 characters4.540 ～ 250※Designation by WOS

-

1 Devis 10-0.01/-0.02+0.02/0 or +0.05/04mm(T4)4.5 ～ 4.99Concave character4 characters540 ～ 250※Designation by WOS

-

1 Devis 10-0.01/-0.02+0.02/0 or +0.05/04mm(T4)5 ～ 5.49Concave character4 characters5.540 ～ 250※Designation by WOS

-

1 Devis 10-0.01/-0.02+0.02/0 or +0.05/04mm(T4)5.5 ～ 5.99Concave character4 characters640 ～ 250※Designation by WOS

-

1 Devis 10-0.01/-0.02+0.02/0 or +0.05/04mm(T4)6 ～ 6.49Concave character4 characters6.540 ～ 250※Designation by WOS

-

1 Devis 10-0.01/-0.02+0.02/0 or +0.05/04mm(T4)6.5 ～ 6.99Concave character4 characters740 ～ 250※Designation by WOS

-

1 Devis 10-0.01/-0.02+0.02/0 or +0.05/04mm(T4)7 ～ 7.99Concave character4 characters840 ～ 250※Designation by WOS

-

1 Devis 10-0.01/-0.02+0.02/0 or +0.05/04mm(T4)8 ～ 9.99Concave character4 characters1040 ～ 250※Designation by WOS

-

1 Devis 10-0.01/-0.02+0.02/0 or +0.05/04mm(T4)10 ～ 11.99Concave character4 characters1240 ～ 250※Designation by WOS

-

1 Devis 10-0.01/-0.02+0.02/0 or +0.05/04mm(T4)4.5 ～ 4.99Concave character5 characters540 ～ 250※Designation by WOS

-

1 Devis 10-0.01/-0.02+0.02/0 or +0.05/04mm(T4)5 ～ 5.49Concave character5 characters5.540 ～ 250※Designation by WOS

-

1 Devis 10-0.01/-0.02+0.02/0 or +0.05/04mm(T4)5.5 ～ 5.99Concave character5 characters640 ～ 250※Designation by WOS

Loading...

  1. << Précédent
  2. 1
  3. 2
  4. 3
  5. 4
  6. 5
  7. Suivant >>
 

Informations de base

Shape type With engraving Material EN 1.3343 Equiv. Surface treatment No
Tip shape No Gas release shape No

Configurer

Réinitialiser

321Numéro de référence applicable suggérée

Afficher les numéros de référence

Certaines spécifications ne sont pas encore précisées.
Le numéro de référence est identifié.

Propriétés de base

  • Shaft diameter tolerance (Reference tolerance)

    • -0.01/-0.02
    • 0/-0.005

    Réinitialiser

  • L dimension tolerance (Reference tolerance)

    • +0.02/0
    • +0.02/0 or +0.05/0

    Réinitialiser

  • Head thickness

    • 4mm(T4)
    • 6mm(JIS)
    • 8mm(JIS)

    Réinitialiser

  • D/P (Shaft diameter)(mm)

     [0.4-11.99/0.01mmunités]

    Réinitialiser

  • Character engraving type

    • Concave character
    • Concave character (Sequential numbering)

    Réinitialiser

  • Number of engraving characters

    • 1 characters
    • 2 characters
    • 3 characters
    • 4 characters
    • 5 characters

    Réinitialiser

  • No. (Nominal diameter)(mm)

    • 0.6
    • 1
    • 1.5
    • 2
    • 2.5
    • 3
    • 3.5
    • 4
    • 4.5
    • 5
    • 5.5
    • 6
    • 6.5
    • 7
    • 8
    • 10
    • 12

    Réinitialiser

  • L (L dimension)(mm)

     [40-250/0.01mmunités]

    Réinitialiser

  • Engraving character designation

    • ※Designation by WOS

    Réinitialiser

  • Type

    • EPHB1M
    • EPHB1MR
    • EPHB2M
    • EPHB2MR
    • EPHB3M
    • EPHB4M
    • EPHB5M
    • EPHBE1M
    • EPHBE1MR
    • EPHBE2M
    • EPHBE2MR
    • EPHBE3M
    • EPHBE4M
    • EPHBE5M
    • EPHJB1M
    • EPHJB1MR
    • EPHJB2M
    • EPHJB2MR
    • EPHJB3M
    • EPHJB4M
    • EPHJB5M
    • EPHJBE1M
    • EPHJBE1MR
    • EPHJBE2M
    • EPHJBE2MR
    • EPHJBE3M
    • EPHJBE4M
    • EPHJBE5M

    Réinitialiser

  • Filtrer par type de données CAO

    • 2D
    • 3D

    Réinitialiser

Propriétés optionnelles

Assistance technique

Question technique

Mode de paiement

  • Facture
  • Prépaiement
  • PayPal

Fabrication à la demande

Changer de vue

Certificats

  • ISO-9001
  • ISO-14001
  • AEO Certification
  • RoHS
  • REACH

MISUMI dans le monde

Social Media

Informations légales

Copyright © MISUMI Corporation All Rights Reserved.