Tiges noyau pour contour / cylindrique / HSS, acier à outils / L 0,01mm / forme de face conique au choix
Cliquez sur cette image pour l'agrandir.
Cliquez sur cette image pour l'agrandir.
Référence pièce
Vous pouvez trouver ici le numéro
de référence lié au produit recherché.
- Dessin
- Aperçu 3D L'aperçu 3D est disponible après la configuration complète
- Numéros de référence
- Catalogue
Numéro de référence :
- Afin d'afficher l'aperçu 3D, merci de configurer votre pièce
L'aperçu 3D n'est pas disponible, car aucun code article n'a été généré.
| Référence pièce |
Prix unitaire standard
| Quantité minimale de commande | Remise sur volume | RoHS | Material | Shaft diameter tolerance | L dimension tolerance | Tip gradient tolerance | D/P (Shaft diameter) (mm) | Step (Step shape of the first step) | Shape (Tip shape) | RE (R shape alteration・enlargement) (mm) | A (Step shape diameter) (mm) | C (Step type taper width) (mm) | CVC (Designation of C dimension in increments of 0.01mm) (mm) | F (Bearing bore length) (mm) | G (Tip C chamfering width) (mm) | K (Tip angle) (°) | L (L dimension) (mm) | Q (Tip R chamfering) (mm) | R (Step type R) (mm) | S (Tip tapered width) (mm) | V (Tip diameter) (mm) | VC (V dimension alteration, smaller than V min) (mm) | |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
- | 1 | Devis | 10 | MAS1C | -0.01/-0.02 | +0.02/0 | ±0.015 | 1 | 1A | No processing | - | - | - | - | 10 ～ 99.5 | - | - | 12 ～ 100 | - | - | - | 0.5 ～ 0.99 | - | ||
- | 1 | Devis | 10 | MAS1C | -0.01/-0.02 | +0.02/0 | ±0.015 | 1 | 1A | No processing | - | - | - | - | 10 ～ 99.5 | - | - | 12 ～ 100 | - | - | - | - | 0.4 ～ 0.49 | ||
- | 1 | Devis | 10 | MAS1C | -0.01/-0.02 | +0.02/0 | ±0.015 | 1.5 | 1A | No processing | - | - | - | - | 10 ～ 99.5 | - | - | 12 ～ 100 | - | - | - | 0.5 ～ 1.49 | - | ||
- | 1 | Devis | 10 | MAS1C | -0.01/-0.02 | +0.02/0 | ±0.015 | 1.5 | 1A | No processing | - | - | - | - | 10 ～ 99.5 | - | - | 12 ～ 100 | - | - | - | - | 0.4 ～ 0.49 | ||
- | 1 | Devis | 10 | MAS1C | -0.01/-0.02 | +0.02/0 | ±0.015 | 2 | 1A | No processing | - | - | - | - | 10 ～ 99.5 | - | - | 12 ～ 100 | - | - | - | 0.5 ～ 1.99 | - | ||
- | 1 | Devis | 10 | MAS1C | -0.01/-0.02 | +0.02/0 | ±0.015 | 2.5 | 1A | No processing | - | - | - | - | 10 ～ 99.5 | - | - | 12 ～ 100 | - | - | - | 0.5 ～ 2.49 | - | ||
- | 1 | Devis | 10 | MAS1C | -0.01/-0.02 | +0.02/0 | ±0.015 | 1 | 1B | No processing | - | 0.4 ～ 0.99 | - | - | 10 ～ 99.5 | - | - | 12 ～ 100 | - | - | - | 0.5 ～ 0.99 | - | ||
- | 1 | Devis | 10 | MAS1C | -0.01/-0.02 | +0.02/0 | ±0.015 | 1 | 1B | No processing | - | 0.4 ～ 0.99 | - | - | 10 ～ 99.5 | - | - | 12 ～ 100 | - | - | - | - | 0.4 ～ 0.49 | ||
- | 1 | Devis | 10 | MAS1C | -0.01/-0.02 | +0.02/0 | ±0.015 | 1.5 | 1B | No processing | - | 0.4 ～ 1.49 | - | - | 10 ～ 99.3 | - | - | 12 ～ 100 | - | - | - | 0.5 ～ 1.49 | - | ||
- | 1 | Devis | 10 | MAS1C | -0.01/-0.02 | +0.02/0 | ±0.015 | 1.5 | 1B | No processing | - | 0.4 ～ 1.49 | - | - | 10 ～ 99.3 | - | - | 12 ～ 100 | - | - | - | - | 0.4 ～ 0.49 | ||
- | 1 | Devis | 10 | MAS1C | -0.01/-0.02 | +0.02/0 | ±0.015 | 2 | 1B | No processing | - | 0.5 ～ 1.99 | - | - | 10 ～ 99.3 | - | - | 12 ～ 100 | - | - | - | 0.5 ～ 1.99 | - | ||
- | 1 | Devis | 10 | MAS1C | -0.01/-0.02 | +0.02/0 | ±0.015 | 2.5 | 1B | No processing | - | 0.5 ～ 2.49 | - | - | 10 ～ 99.3 | - | - | 12 ～ 100 | - | - | - | 0.5 ～ 2.49 | - | ||
- | 1 | Devis | 10 | MAS1C | -0.01/-0.02 | +0.02/0 | ±0.015 | 1 | 1C | No processing | - | 0.4 ～ 0.99 | - | - | 10 ～ 99.5 | - | - | 12 ～ 100 | - | - | - | 0.5 ～ 0.99 | - | ||
- | 1 | Devis | 10 | MAS1C | -0.01/-0.02 | +0.02/0 | ±0.015 | 1 | 1C | No processing | - | 0.4 ～ 0.99 | - | - | 10 ～ 99.5 | - | - | 12 ～ 100 | - | - | - | - | 0.4 ～ 0.49 | ||
- | 1 | Devis | 10 | MAS1C | -0.01/-0.02 | +0.02/0 | ±0.015 | 1.5 | 1C | No processing | - | 0.4 ～ 1.49 | - | - | 10 ～ 99.5 | - | - | 12 ～ 100 | - | - | - | 0.5 ～ 1.49 | - | ||
- | 1 | Devis | 10 | MAS1C | -0.01/-0.02 | +0.02/0 | ±0.015 | 1.5 | 1C | No processing | - | 0.4 ～ 1.49 | - | - | 10 ～ 99.5 | - | - | 12 ～ 100 | - | - | - | - | 0.4 ～ 0.49 | ||
- | 1 | Devis | 10 | MAS1C | -0.01/-0.02 | +0.02/0 | ±0.015 | 2 | 1C | No processing | - | 0.5 ～ 1.99 | - | - | 10 ～ 99.5 | - | - | 12 ～ 100 | - | - | - | 0.5 ～ 1.99 | - | ||
- | 1 | Devis | 10 | MAS1C | -0.01/-0.02 | +0.02/0 | ±0.015 | 2.5 | 1C | No processing | - | 0.5 ～ 2.49 | - | - | 10 ～ 99.5 | - | - | 12 ～ 100 | - | - | - | 0.5 ～ 2.49 | - | ||
- | 1 | Devis | 10 | MAS1C | -0.01/-0.02 | +0.02/0 | ±0.015 | 1 | 1D | No processing | - | 0.4 ～ 0.99 | 0.1 ～ 4 | - | 10 ～ 99.5 | - | - | 12 ～ 100 | - | - | - | 0.5 ～ 0.99 | - | ||
- | 1 | Devis | 10 | MAS1C | -0.01/-0.02 | +0.02/0 | ±0.015 | 1 | 1D | No processing | - | 0.4 ～ 0.99 | - | 0.5 ～ 1 | 10 ～ 99.5 | - | - | 12 ～ 100 | - | - | - | 0.5 ～ 0.99 | - | ||
- | 1 | Devis | 10 | MAS1C | -0.01/-0.02 | +0.02/0 | ±0.015 | 1 | 1D | No processing | - | 0.4 ～ 0.99 | 0.1 ～ 4 | - | 10 ～ 99.5 | - | - | 12 ～ 100 | - | - | - | - | 0.4 ～ 0.49 | ||
- | 1 | Devis | 10 | MAS1C | -0.01/-0.02 | +0.02/0 | ±0.015 | 1 | 1D | No processing | - | 0.4 ～ 0.99 | - | 0.5 ～ 1 | 10 ～ 99.5 | - | - | 12 ～ 100 | - | - | - | - | 0.4 ～ 0.49 | ||
- | 1 | Devis | 10 | MAS1C | -0.01/-0.02 | +0.02/0 | ±0.015 | 1.5 | 1D | No processing | - | 0.4 ～ 1.49 | 0.1 ～ 4 | - | 10 ～ 99.4 | - | - | 12 ～ 100 | - | - | - | 0.5 ～ 1.49 | - | ||
- | 1 | Devis | 10 | MAS1C | -0.01/-0.02 | +0.02/0 | ±0.015 | 1.5 | 1D | No processing | - | 0.4 ～ 1.49 | - | 0.5 ～ 1 | 10 ～ 99.4 | - | - | 12 ～ 100 | - | - | - | 0.5 ～ 1.49 | - | ||
- | 1 | Devis | 10 | MAS1C | -0.01/-0.02 | +0.02/0 | ±0.015 | 1.5 | 1D | No processing | - | 0.4 ～ 1.49 | 0.1 ～ 4 | - | 10 ～ 99.4 | - | - | 12 ～ 100 | - | - | - | - | 0.4 ～ 0.49 | ||
- | 1 | Devis | 10 | MAS1C | -0.01/-0.02 | +0.02/0 | ±0.015 | 1.5 | 1D | No processing | - | 0.4 ～ 1.49 | - | 0.5 ～ 1 | 10 ～ 99.4 | - | - | 12 ～ 100 | - | - | - | - | 0.4 ～ 0.49 | ||
- | 1 | Devis | 10 | MAS1C | -0.01/-0.02 | +0.02/0 | ±0.015 | 2 | 1D | No processing | - | 0.5 ～ 1.99 | 0.1 ～ 4 | - | 10 ～ 99.4 | - | - | 12 ～ 100 | - | - | - | 0.5 ～ 1.99 | - | ||
- | 1 | Devis | 10 | MAS1C | -0.01/-0.02 | +0.02/0 | ±0.015 | 2 | 1D | No processing | - | 0.5 ～ 1.99 | - | 0.5 ～ 1 | 10 ～ 99.4 | - | - | 12 ～ 100 | - | - | - | 0.5 ～ 1.99 | - | ||
- | 1 | Devis | 10 | MAS1C | -0.01/-0.02 | +0.02/0 | ±0.015 | 2.5 | 1D | No processing | - | 0.5 ～ 2.49 | 0.1 ～ 4 | - | 10 ～ 99.4 | - | - | 12 ～ 100 | - | - | - | 0.5 ～ 2.49 | - | ||
- | 1 | Devis | 10 | MAS1C | -0.01/-0.02 | +0.02/0 | ±0.015 | 2.5 | 1D | No processing | - | 0.5 ～ 2.49 | - | 0.5 ～ 1 | 10 ～ 99.4 | - | - | 12 ～ 100 | - | - | - | 0.5 ～ 2.49 | - | ||
- | 1 | Devis | 10 | MAS1C | -0.01/-0.02 | +0.02/0 | ±0.015 | 1 | 1E | No processing | - | 0.4 ～ 0.99 | - | - | 10 ～ 99.5 | - | - | 12 ～ 100 | - | 0.2 ～ 0.3 | - | 0.5 ～ 0.99 | - | ||
- | 1 | Devis | 10 | MAS1C | -0.01/-0.02 | +0.02/0 | ±0.015 | 1 | 1E | No processing | 0.5 ～ 2 | 0.4 ～ 0.99 | - | - | 10 ～ 99.5 | - | - | 12 ～ 100 | - | - | - | 0.5 ～ 0.99 | - | ||
- | 1 | Devis | 10 | MAS1C | -0.01/-0.02 | +0.02/0 | ±0.015 | 1 | 1E | No processing | - | 0.4 ～ 0.99 | - | - | 10 ～ 99.5 | - | - | 12 ～ 100 | - | 0.2 ～ 0.3 | - | - | 0.4 ～ 0.49 | ||
- | 1 | Devis | 10 | MAS1C | -0.01/-0.02 | +0.02/0 | ±0.015 | 1 | 1E | No processing | 0.5 ～ 2 | 0.4 ～ 0.99 | - | - | 10 ～ 99.5 | - | - | 12 ～ 100 | - | - | - | - | 0.4 ～ 0.49 | ||
- | 1 | Devis | 10 | MAS1C | -0.01/-0.02 | +0.02/0 | ±0.015 | 1.5 | 1E | No processing | - | 0.4 ～ 1.49 | - | - | 10 ～ 99.5 | - | - | 12 ～ 100 | - | 0.2 ～ 0.5 | - | 0.5 ～ 1.49 | - | ||
- | 1 | Devis | 10 | MAS1C | -0.01/-0.02 | +0.02/0 | ±0.015 | 1.5 | 1E | No processing | 0.5 ～ 2 | 0.4 ～ 1.49 | - | - | 10 ～ 99.5 | - | - | 12 ～ 100 | - | - | - | 0.5 ～ 1.49 | - | ||
- | 1 | Devis | 10 | MAS1C | -0.01/-0.02 | +0.02/0 | ±0.015 | 1.5 | 1E | No processing | - | 0.4 ～ 1.49 | - | - | 10 ～ 99.5 | - | - | 12 ～ 100 | - | 0.2 ～ 0.5 | - | - | 0.4 ～ 0.49 | ||
- | 1 | Devis | 10 | MAS1C | -0.01/-0.02 | +0.02/0 | ±0.015 | 1.5 | 1E | No processing | 0.5 ～ 2 | 0.4 ～ 1.49 | - | - | 10 ～ 99.5 | - | - | 12 ～ 100 | - | - | - | - | 0.4 ～ 0.49 | ||
- | 1 | Devis | 10 | MAS1C | -0.01/-0.02 | +0.02/0 | ±0.015 | 2 | 1E | No processing | - | 0.5 ～ 1.99 | - | - | 10 ～ 99.4 | - | - | 12 ～ 100 | - | 0.2 ～ 0.7 | - | 0.5 ～ 1.99 | - | ||
- | 1 | Devis | 10 | MAS1C | -0.01/-0.02 | +0.02/0 | ±0.015 | 2 | 1E | No processing | 0.5 ～ 2 | 0.5 ～ 1.99 | - | - | 10 ～ 99.4 | - | - | 12 ～ 100 | - | - | - | 0.5 ～ 1.99 | - | ||
- | 1 | Devis | 10 | MAS1C | -0.01/-0.02 | +0.02/0 | ±0.015 | 2.5 | 1E | No processing | - | 0.5 ～ 2.49 | - | - | 10 ～ 99.4 | - | - | 12 ～ 100 | - | 0.2 ～ 1 | - | 0.5 ～ 2.49 | - | ||
- | 1 | Devis | 10 | MAS1C | -0.01/-0.02 | +0.02/0 | ±0.015 | 2.5 | 1E | No processing | 0.5 ～ 2 | 0.5 ～ 2.49 | - | - | 10 ～ 99.4 | - | - | 12 ～ 100 | - | - | - | 0.5 ～ 2.49 | - | ||
- | 1 | Devis | 10 | SKD61 | -0.01/-0.02 | +0.02/0 | ±0.015 | 1 | 1A | No processing | - | - | - | - | 10 ～ 99.5 | - | - | 12 ～ 100 | - | - | - | 0.5 ～ 0.99 | - | ||
- | 1 | Devis | 10 | SKD61 | -0.01/-0.02 | +0.02/0 | ±0.015 | 1 | 1A | No processing | - | - | - | - | 10 ～ 99.5 | - | - | 12 ～ 100 | - | - | - | - | 0.4 ～ 0.49 | ||
- | 1 | Devis | 10 | SKD61 | -0.01/-0.02 | +0.02/0 | ±0.015 | 1.5 | 1A | No processing | - | - | - | - | 10 ～ 99.5 | - | - | 12 ～ 100 | - | - | - | 0.5 ～ 1.49 | - | ||
- | 1 | Devis | 10 | SKD61 | -0.01/-0.02 | +0.02/0 | ±0.015 | 1.5 | 1A | No processing | - | - | - | - | 10 ～ 99.5 | - | - | 12 ～ 100 | - | - | - | - | 0.4 ～ 0.49 | ||
- | 1 | Devis | 10 | SKD61 | -0.01/-0.02 | +0.02/0 | ±0.015 | 2 | 1A | No processing | - | - | - | - | 10 ～ 99.5 | - | - | 12 ～ 100 | - | - | - | 0.5 ～ 1.99 | - | ||
- | 1 | Devis | 10 | SKD61 | -0.01/-0.02 | +0.02/0 | ±0.015 | 2.5 | 1A | No processing | - | - | - | - | 10 ～ 99.5 | - | - | 12 ～ 100 | - | - | - | 0.5 ～ 2.49 | - | ||
- | 1 | Devis | 10 | SKD61 | -0.01/-0.02 | +0.02/0 | ±0.015 | 3 | 1A | No processing | - | - | - | - | 10 ～ 99.5 | - | - | 12 ～ 100 | - | - | - | 0.7 ～ 2.99 | - | ||
- | 1 | Devis | 10 | SKD61 | -0.01/-0.02 | +0.02/0 | ±0.015 | 3.5 | 1A | No processing | - | - | - | - | 10 ～ 119.5 | - | - | 12 ～ 120 | - | - | - | 1 ～ 3.49 | - | ||
- | 1 | Devis | 10 | SKD61 | -0.01/-0.02 | +0.02/0 | ±0.015 | 3.5 | 1A | No processing | - | - | - | - | 10 ～ 119.5 | - | - | 12 ～ 120 | - | - | - | - | 0.7 ～ 0.99 | ||
- | 1 | Devis | 10 | SKD61 | -0.01/-0.02 | +0.02/0 | ±0.015 | 4 | 1A | No processing | - | - | - | - | 10 ～ 119.5 | - | - | 12 ～ 120 | - | - | - | 1 ～ 3.99 | - | ||
- | 1 | Devis | 10 | SKD61 | -0.01/-0.02 | +0.02/0 | ±0.015 | 4 | 1A | No processing | - | - | - | - | 10 ～ 119.5 | - | - | 12 ～ 120 | - | - | - | - | 0.7 ～ 0.99 | ||
- | 1 | Devis | 10 | SKD61 | -0.01/-0.02 | +0.02/0 | ±0.015 | 4.5 | 1A | No processing | - | - | - | - | 10 ～ 119.5 | - | - | 12 ～ 120 | - | - | - | 1 ～ 4.49 | - | ||
- | 1 | Devis | 10 | SKD61 | -0.01/-0.02 | +0.02/0 | ±0.015 | 5 | 1A | No processing | - | - | - | - | 10 ～ 119.5 | - | - | 12 ～ 120 | - | - | - | 1 ～ 4.99 | - | ||
- | 1 | Devis | 10 | SKD61 | -0.01/-0.02 | +0.02/0 | ±0.015 | 5.5 | 1A | No processing | - | - | - | - | 10 ～ 119.5 | - | - | 12 ～ 120 | - | - | - | 1.5 ～ 5.49 | - | ||
- | 1 | Devis | 10 | SKD61 | -0.01/-0.02 | +0.02/0 | ±0.015 | 5.5 | 1A | No processing | - | - | - | - | 10 ～ 119.5 | - | - | 12 ～ 120 | - | - | - | - | 1 ～ 1.49 | ||
- | 1 | Devis | 10 | SKD61 | -0.01/-0.02 | +0.02/0 | ±0.015 | 6 | 1A | No processing | - | - | - | - | 10 ～ 119.5 | - | - | 12 ～ 120 | - | - | - | 2 ～ 5.99 | - | ||
- | 1 | Devis | 10 | SKD61 | -0.01/-0.02 | +0.02/0 | ±0.015 | 6 | 1A | No processing | - | - | - | - | 10 ～ 119.5 | - | - | 12 ～ 120 | - | - | - | - | 1.5 ～ 1.99 | ||
- | 1 | Devis | 10 | SKD61 | -0.01/-0.02 | +0.02/0 | ±0.015 | 6.5 | 1A | No processing | - | - | - | - | 10 ～ 119.5 | - | - | 12 ～ 120 | - | - | - | 2 ～ 6.49 | - |
Loading...
Informations de base
| Shape type | One-step | Surface treatment | No | Head thickness | 4mm(T4) |
|---|---|---|---|---|---|
| Step (Step shape of the second step) | No second step |
Configurer
Propriétés de base
-
Material
- SKH51
- SKD61
- NAK80
- DH2F
- SUS440C
- MAS1C
- STAVAX ESR
- PROVA400
-
Shaft diameter tolerance
- 0/-0.005
- -0.01/-0.02
-
L dimension tolerance
- +0.02/0
- 0/-0.1
-
Tip gradient tolerance
- ±0.01
- ±0.015
-
D/P (Shaft diameter)(mm)
-
Step (Step shape of the first step)
- 1A
- 1B
- 1C
- 1D
- 1E
-
RE (R shape alteration・enlargement)(mm)
-
A (Step shape diameter)(mm)
-
C (Step type taper width)(mm)
-
CVC (Designation of C dimension in increments of 0.01mm)(mm)
-
F (Bearing bore length)(mm)
-
G (Tip C chamfering width)(mm)
-
K (Tip angle)(°)
-
L (L dimension)(mm)
-
Q (Tip R chamfering)(mm)
-
R (Step type R)(mm)
-
S (Tip tapered width)(mm)
-
V (Tip diameter)(mm)
-
VC (V dimension alteration, smaller than V min)(mm)
-
Type
- CPA-1A
- CPA-1AB
- CPA-1AC
- CPA-1AG
- CPA-1AR
- CPA-1AT
- CPA-1B
- CPA-1BB
- CPA-1BC
- CPA-1BG
- CPA-1BR
- CPA-1BT
- CPA-1C
- CPA-1CB
- CPA-1CC
- CPA-1CG
- CPA-1CR
- CPA-1CT
- CPA-1D
- CPA-1DB
- CPA-1DC
- CPA-1DG
- CPA-1DR
- CPA-1DT
- CPA-1E
- CPA-1EB
- CPA-1EC
- CPA-1EG
- CPA-1ER
- CPA-1ET
- CPD-1A
- CPD-1AB
- CPD-1AC
- CPD-1AG
- CPD-1AR
- CPD-1AT
- CPD-1B
- CPD-1BB
- CPD-1BC
- CPD-1BG
- CPD-1BR
- CPD-1BT
- CPD-1C
- CPD-1CB
- CPD-1CC
- CPD-1CG
- CPD-1CR
- CPD-1CT
- CPD-1D
- CPD-1DB
- CPD-1DC
- CPD-1DG
- CPD-1DR
- CPD-1DT
- CPD-1E
- CPD-1EB
- CPD-1EC
- CPD-1EG
- CPD-1ER
- CPD-1ET
- CPEH-1A
- CPEH-1AB
- CPEH-1AC
- CPEH-1AG
- CPEH-1AR
- CPEH-1AT
- CPEH-1B
- CPEH-1BB
- CPEH-1BC
- CPEH-1BG
- CPEH-1BR
- CPEH-1BT
- CPEH-1C
- CPEH-1CB
- CPEH-1CC
- CPEH-1CG
- CPEH-1CR
- CPEH-1CT
- CPEH-1D
- CPEH-1DB
- CPEH-1DC
- CPEH-1DG
- CPEH-1DR
- CPEH-1DT
- CPEH-1E
- CPEH-1EB
- CPEH-1EC
- CPEH-1EG
- CPEH-1ER
- CPEH-1ET
- CPF-1A
- CPF-1AB
- CPF-1AC
- CPF-1AG
- CPF-1AR
- CPF-1AT
- CPF-1B
- CPF-1BB
- CPF-1BC
- CPF-1BG
- CPF-1BR
- CPF-1BT
- CPF-1C
- CPF-1CB
- CPF-1CC
- CPF-1CG
- CPF-1CR
- CPF-1CT
- CPF-1D
- CPF-1DB
- CPF-1DC
- CPF-1DG
- CPF-1DR
- CPF-1DT
- CPF-1E
- CPF-1EB
- CPF-1EC
- CPF-1EG
- CPF-1ER
- CPF-1ET
- CPG-1A
- CPG-1AB
- CPG-1AC
- CPG-1AG
- CPG-1AR
- CPG-1AT
- CPG-1B
- CPG-1BB
- CPG-1BC
- CPG-1BG
- CPG-1BR
- CPG-1BT
- CPG-1C
- CPG-1CB
- CPG-1CC
- CPG-1CG
- CPG-1CR
- CPG-1CT
- CPG-1D
- CPG-1DB
- CPG-1DC
- CPG-1DG
- CPG-1DR
- CPG-1DT
- CPG-1E
- CPG-1EB
- CPG-1EC
- CPG-1EG
- CPG-1ER
- CPG-1ET
- CPH-1A
- CPH-1AB
- CPH-1AC
- CPH-1AG
- CPH-1AR
- CPH-1AT
- CPH-1B
- CPH-1BB
- CPH-1BC
- CPH-1BG
- CPH-1BR
- CPH-1BT
- CPH-1C
- CPH-1CB
- CPH-1CC
- CPH-1CG
- CPH-1CR
- CPH-1CT
- CPH-1D
- CPH-1DB
- CPH-1DC
- CPH-1DG
- CPH-1DR
- CPH-1DT
- CPH-1E
- CPH-1EB
- CPH-1EC
- CPH-1EG
- CPH-1ER
- CPH-1ET
- CPK-1A
- CPK-1AB
- CPK-1AC
- CPK-1AG
- CPK-1AR
- CPK-1AT
- CPK-1B
- CPK-1BB
- CPK-1BC
- CPK-1BG
- CPK-1BR
- CPK-1BT
- CPK-1C
- CPK-1CB
- CPK-1CC
- CPK-1CG
- CPK-1CR
- CPK-1CT
- CPK-1D
- CPK-1DB
- CPK-1DC
- CPK-1DG
- CPK-1DR
- CPK-1DT
- CPK-1E
- CPK-1EB
- CPK-1EC
- CPK-1EG
- CPK-1ER
- CPK-1ET
- CPN-1A
- CPN-1AB
- CPN-1AC
- CPN-1AG
- CPN-1AR
- CPN-1AT
- CPN-1B
- CPN-1BB
- CPN-1BC
- CPN-1BG
- CPN-1BR
- CPN-1BT
- CPN-1C
- CPN-1CB
- CPN-1CC
- CPN-1CG
- CPN-1CR
- CPN-1CT
- CPN-1D
- CPN-1DB
- CPN-1DC
- CPN-1DG
- CPN-1DR
- CPN-1DT
- CPN-1E
- CPN-1EB
- CPN-1EC
- CPN-1EG
- CPN-1ER
- CPN-1ET
- CPP-1A
- CPP-1AB
- CPP-1AC
- CPP-1AG
- CPP-1AR
- CPP-1AT
- CPP-1B
- CPP-1BB
- CPP-1BC
- CPP-1BG
- CPP-1BR
- CPP-1BT
- CPP-1C
- CPP-1CB
- CPP-1CC
- CPP-1CG
- CPP-1CR
- CPP-1CT
- CPP-1D
- CPP-1DB
- CPP-1DC
- CPP-1DG
- CPP-1DR
- CPP-1DT
- CPP-1E
- CPP-1EB
- CPP-1EC
- CPP-1EG
- CPP-1ER
- CPP-1ET
- CPQH-1A
- CPQH-1AB
- CPQH-1AC
- CPQH-1AG
- CPQH-1AR
- CPQH-1AT
- CPQH-1B
- CPQH-1BB
- CPQH-1BC
- CPQH-1BG
- CPQH-1BR
- CPQH-1BT
- CPQH-1C
- CPQH-1CB
- CPQH-1CC
- CPQH-1CG
- CPQH-1CR
- CPQH-1CT
- CPQH-1D
- CPQH-1DB
- CPQH-1DC
- CPQH-1DG
- CPQH-1DR
- CPQH-1DT
- CPQH-1E
- CPQH-1EB
- CPQH-1EC
- CPQH-1EG
- CPQH-1ER
- CPQH-1ET
- CPRH-1A
- CPRH-1AB
- CPRH-1AC
- CPRH-1AG
- CPRH-1AR
- CPRH-1AT
- CPRH-1B
- CPRH-1BB
- CPRH-1BC
- CPRH-1BG
- CPRH-1BR
- CPRH-1BT
- CPRH-1C
- CPRH-1CB
- CPRH-1CC
- CPRH-1CG
- CPRH-1CR
- CPRH-1CT
- CPRH-1D
- CPRH-1DB
- CPRH-1DC
- CPRH-1DG
- CPRH-1DR
- CPRH-1DT
- CPRH-1E
- CPRH-1EB
- CPRH-1EC
- CPRH-1EG
- CPRH-1ER
- CPRH-1ET
- CPTH-1A
- CPTH-1AB
- CPTH-1AC
- CPTH-1AG
- CPTH-1AR
- CPTH-1AT
- CPTH-1B
- CPTH-1BB
- CPTH-1BC
- CPTH-1BG
- CPTH-1BR
- CPTH-1BT
- CPTH-1C
- CPTH-1CB
- CPTH-1CC
- CPTH-1CG
- CPTH-1CR
- CPTH-1CT
- CPTH-1D
- CPTH-1DB
- CPTH-1DC
- CPTH-1DG
- CPTH-1DR
- CPTH-1DT
- CPTH-1E
- CPTH-1EB
- CPTH-1EC
- CPTH-1EG
- CPTH-1ER
- CPTH-1ET
- CPW-1A
- CPW-1AB
- CPW-1AC
- CPW-1AG
- CPW-1AR
- CPW-1AT
- CPW-1B
- CPW-1BB
- CPW-1BC
- CPW-1BG
- CPW-1BR
- CPW-1BT
- CPW-1C
- CPW-1CB
- CPW-1CC
- CPW-1CG
- CPW-1CR
- CPW-1CT
- CPW-1D
- CPW-1DB
- CPW-1DC
- CPW-1DG
- CPW-1DR
- CPW-1DT
- CPW-1E
- CPW-1EB
- CPW-1EC
- CPW-1EG
- CPW-1ER
- CPW-1ET
- CPX-1A
- CPX-1AB
- CPX-1AC
- CPX-1AG
- CPX-1AR
- CPX-1AT
- CPX-1B
- CPX-1BB
- CPX-1BC
- CPX-1BG
- CPX-1BR
- CPX-1BT
- CPX-1C
- CPX-1CB
- CPX-1CC
- CPX-1CG
- CPX-1CR
- CPX-1CT
- CPX-1D
- CPX-1DB
- CPX-1DC
- CPX-1DG
- CPX-1DR
- CPX-1DT
- CPX-1E
- CPX-1EB
- CPX-1EC
- CPX-1EG
- CPX-1ER
- CPX-1ET
- CPY-1A
- CPY-1AB
- CPY-1AC
- CPY-1AG
- CPY-1AR
- CPY-1AT
- CPY-1B
- CPY-1BB
- CPY-1BC
- CPY-1BG
- CPY-1BR
- CPY-1BT
- CPY-1C
- CPY-1CB
- CPY-1CC
- CPY-1CG
- CPY-1CR
- CPY-1CT
- CPY-1D
- CPY-1DB
- CPY-1DC
- CPY-1DG
- CPY-1DR
- CPY-1DT
- CPY-1E
- CPY-1EB
- CPY-1EC
- CPY-1EG
- CPY-1ER
- CPY-1ET
-
Shape (Tip shape)
- No processing
- C
- G
- T
- R
- B
-
Filtrer par type de données CAO
- 2D
- 3D
Propriétés optionnelles
- Les spécifications et les dimensions de certaines pièces peuvent ne pas être intégralement indiquées. Pour plus de détails, reportez-vous aux catalogues des fabricants .
Assistance technique
Mode de paiement
Fabrication à la demande
Certificats
Copyright © MISUMI Corporation All Rights Reserved.