Tiges noyau pour contour / cylindriques / HSS, acier à outils / L 0,01mm / à épaulement / Purge gazeuse / forme frontale au choix
Cliquez sur cette image pour l'agrandir.
Cliquez sur cette image pour l'agrandir.
Référence pièce
Vous pouvez trouver ici le numéro
de référence lié au produit recherché.
- Dessin
- Aperçu 3D L'aperçu 3D est disponible après la configuration complète
- Numéros de référence
- Catalogue
Numéro de référence :
- Afin d'afficher l'aperçu 3D, merci de configurer votre pièce
L'aperçu 3D n'est pas disponible, car aucun code article n'a été généré.
| Référence pièce |
Prix unitaire standard
| Quantité minimale de commande | Remise sur volume | RoHS | Material | Shaft diameter tolerance | L dimension tolerance | Tip gradient tolerance | D/P (Shaft diameter) (mm) | Step (Step shape of the first step) | Shape (Tip shape) | A (Step shape diameter) (mm) | C (Step type taper width) (mm) | CVC (Designation of C dimension in increments of 0.01mm) (mm) | DC (Gas release section diameter) (mm) | Extend the flat section SV to the bottom | F (Bearing bore length) (mm) | G (Tip C chamfering width) (mm) | K (Tip angle) (°) | L (L dimension) (mm) | N (Gas release section diameter) (mm) | Q (Tip R chamfering) (mm) | S (Tip tapered width) (mm) | SV (Gas release facet cutting length) (mm) | V (Tip diameter) (mm) | VC (V dimension alteration (mm) | When DC = D | |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
- | 1 | Devis | 10 | SKD61 | -0.01/-0.02 | 0/-0.1 | ±0.015 | 1 | 1A | G | - | - | - | - | - | 14.5 ～ 98.97 | - | 21 ～ 60 | 16.5 ～ 100 | 0.3 ～ 10 | - | - | 2 ～ 50 | 0.5 ～ 0.99 | - | - | ||
- | 1 | Devis | 10 | SKD61 | -0.01/-0.02 | 0/-0.1 | ±0.015 | 1 | 1A | G | - | - | - | - | SVC | 14.5 ～ 98.97 | - | 21 ～ 60 | 16.5 ～ 100 | 0.3 ～ 10 | - | - | - | 0.5 ～ 0.99 | - | - | ||
- | 1 | Devis | 10 | SKD61 | -0.01/-0.02 | 0/-0.1 | ±0.015 | 1 | 1A | G | - | - | - | - | - | 14.5 ～ 98.97 | - | 21 ～ 60 | 16.5 ～ 100 | 0.3 ～ 10 | - | - | 2 ～ 50 | - | 0.4 ～ 0.49 | - | ||
- | 1 | Devis | 10 | SKD61 | -0.01/-0.02 | 0/-0.1 | ±0.015 | 1 | 1A | G | - | - | - | - | SVC | 14.5 ～ 98.97 | - | 21 ～ 60 | 16.5 ～ 100 | 0.3 ～ 10 | - | - | - | - | 0.4 ～ 0.49 | - | ||
- | 1 | Devis | 10 | SKD61 | -0.01/-0.02 | 0/-0.1 | ±0.015 | 1 | 1A | G | - | - | - | - | - | - | - | 21 ～ 60 | 16.5 ～ 100 | 0.3 ～ 10 | - | - | 2 ～ 50 | 0.5 ～ 0.99 | - | - | ||
- | 1 | Devis | 10 | SKD61 | -0.01/-0.02 | 0/-0.1 | ±0.015 | 1 | 1A | G | - | - | - | - | SVC | - | - | 21 ～ 60 | 16.5 ～ 100 | 0.3 ～ 10 | - | - | - | 0.5 ～ 0.99 | - | - | ||
- | 1 | Devis | 10 | SKD61 | -0.01/-0.02 | 0/-0.1 | ±0.015 | 1 | 1A | G | - | - | - | - | - | - | - | 21 ～ 60 | 16.5 ～ 100 | 0.3 ～ 10 | - | - | 2 ～ 50 | - | 0.4 ～ 0.49 | - | ||
- | 1 | Devis | 10 | SKD61 | -0.01/-0.02 | 0/-0.1 | ±0.015 | 1 | 1A | G | - | - | - | - | SVC | - | - | 21 ～ 60 | 16.5 ～ 100 | 0.3 ～ 10 | - | - | - | - | 0.4 ～ 0.49 | - | ||
- | 1 | Devis | 10 | SKD61 | -0.01/-0.02 | 0/-0.1 | ±0.015 | 1.5 | 1A | G | - | - | - | - | - | 14.5 ～ 98.97 | - | 21 ～ 60 | 16.5 ～ 100 | 0.3 ～ 10 | - | - | 2 ～ 50 | 0.5 ～ 1.49 | - | - | ||
- | 1 | Devis | 10 | SKD61 | -0.01/-0.02 | 0/-0.1 | ±0.015 | 1.5 | 1A | G | - | - | - | - | SVC | 14.5 ～ 98.97 | - | 21 ～ 60 | 16.5 ～ 100 | 0.3 ～ 10 | - | - | - | 0.5 ～ 1.49 | - | - | ||
- | 1 | Devis | 10 | SKD61 | -0.01/-0.02 | 0/-0.1 | ±0.015 | 1.5 | 1A | G | - | - | - | - | - | 14.5 ～ 98.97 | - | 21 ～ 60 | 16.5 ～ 100 | 0.3 ～ 10 | - | - | 2 ～ 50 | - | 0.4 ～ 0.49 | - | ||
- | 1 | Devis | 10 | SKD61 | -0.01/-0.02 | 0/-0.1 | ±0.015 | 1.5 | 1A | G | - | - | - | - | SVC | 14.5 ～ 98.97 | - | 21 ～ 60 | 16.5 ～ 100 | 0.3 ～ 10 | - | - | - | - | 0.4 ～ 0.49 | - | ||
- | 1 | Devis | 10 | SKD61 | -0.01/-0.02 | 0/-0.1 | ±0.015 | 1.5 | 1A | G | - | - | - | - | - | - | - | 21 ～ 60 | 16.5 ～ 100 | 0.3 ～ 10 | - | - | 2 ～ 50 | 0.5 ～ 1.49 | - | - | ||
- | 1 | Devis | 10 | SKD61 | -0.01/-0.02 | 0/-0.1 | ±0.015 | 1.5 | 1A | G | - | - | - | - | SVC | - | - | 21 ～ 60 | 16.5 ～ 100 | 0.3 ～ 10 | - | - | - | 0.5 ～ 1.49 | - | - | ||
- | 1 | Devis | 10 | SKD61 | -0.01/-0.02 | 0/-0.1 | ±0.015 | 1.5 | 1A | G | - | - | - | - | - | - | - | 21 ～ 60 | 16.5 ～ 100 | 0.3 ～ 10 | - | - | 2 ～ 50 | - | 0.4 ～ 0.49 | - | ||
- | 1 | Devis | 10 | SKD61 | -0.01/-0.02 | 0/-0.1 | ±0.015 | 1.5 | 1A | G | - | - | - | - | SVC | - | - | 21 ～ 60 | 16.5 ～ 100 | 0.3 ～ 10 | - | - | - | - | 0.4 ～ 0.49 | - | ||
- | 1 | Devis | 10 | SKD61 | -0.01/-0.02 | 0/-0.1 | ±0.015 | 2 | 1A | G | - | - | - | - | - | 14.5 ～ 98.97 | - | 21 ～ 60 | 16.5 ～ 100 | 0.3 ～ 10 | - | - | 2 ～ 50 | 0.5 ～ 1.99 | - | - | ||
- | 1 | Devis | 10 | SKD61 | -0.01/-0.02 | 0/-0.1 | ±0.015 | 2 | 1A | G | - | - | - | - | SVC | 14.5 ～ 98.97 | - | 21 ～ 60 | 16.5 ～ 100 | 0.3 ～ 10 | - | - | - | 0.5 ～ 1.99 | - | - | ||
- | 1 | Devis | 10 | SKD61 | -0.01/-0.02 | 0/-0.1 | ±0.015 | 2 | 1A | G | - | - | - | - | - | - | - | 21 ～ 60 | 16.5 ～ 100 | 0.3 ～ 10 | - | - | 2 ～ 50 | 0.5 ～ 1.99 | - | - | ||
- | 1 | Devis | 10 | SKD61 | -0.01/-0.02 | 0/-0.1 | ±0.015 | 2 | 1A | G | - | - | - | - | SVC | - | - | 21 ～ 60 | 16.5 ～ 100 | 0.3 ～ 10 | - | - | - | 0.5 ～ 1.99 | - | - | ||
- | 1 | Devis | 10 | SKD61 | -0.01/-0.02 | 0/-0.1 | ±0.015 | 2.5 | 1A | G | - | - | - | - | - | 14.5 ～ 98.97 | - | 21 ～ 60 | 16.5 ～ 100 | 0.3 ～ 10 | - | - | 2 ～ 50 | 0.5 ～ 2.49 | - | - | ||
- | 1 | Devis | 10 | SKD61 | -0.01/-0.02 | 0/-0.1 | ±0.015 | 2.5 | 1A | G | - | - | - | - | SVC | 14.5 ～ 98.97 | - | 21 ～ 60 | 16.5 ～ 100 | 0.3 ～ 10 | - | - | - | 0.5 ～ 2.49 | - | - | ||
- | 1 | Devis | 10 | SKD61 | -0.01/-0.02 | 0/-0.1 | ±0.015 | 2.5 | 1A | G | - | - | - | - | - | - | - | 21 ～ 60 | 16.5 ～ 100 | 0.3 ～ 10 | - | - | 2 ～ 50 | 0.5 ～ 2.49 | - | - | ||
- | 1 | Devis | 10 | SKD61 | -0.01/-0.02 | 0/-0.1 | ±0.015 | 2.5 | 1A | G | - | - | - | - | SVC | - | - | 21 ～ 60 | 16.5 ～ 100 | 0.3 ～ 10 | - | - | - | 0.5 ～ 2.49 | - | - | ||
- | 1 | Devis | 10 | SKD61 | -0.01/-0.02 | 0/-0.1 | ±0.015 | 3 | 1A | G | - | - | - | - | - | 14.5 ～ 98.87 | - | 21 ～ 60 | 16.5 ～ 100 | 0.3 ～ 10 | - | - | 2 ～ 50 | 0.7 ～ 2.99 | - | - | ||
- | 1 | Devis | 10 | SKD61 | -0.01/-0.02 | 0/-0.1 | ±0.015 | 3 | 1A | G | - | - | - | - | SVC | 14.5 ～ 98.87 | - | 21 ～ 60 | 16.5 ～ 100 | 0.3 ～ 10 | - | - | - | 0.7 ～ 2.99 | - | - | ||
- | 1 | Devis | 10 | SKD61 | -0.01/-0.02 | 0/-0.1 | ±0.015 | 3 | 1A | G | - | - | - | - | - | - | - | 21 ～ 60 | 16.5 ～ 100 | 0.3 ～ 10 | - | - | 2 ～ 50 | 0.7 ～ 2.99 | - | - | ||
- | 1 | Devis | 10 | SKD61 | -0.01/-0.02 | 0/-0.1 | ±0.015 | 3 | 1A | G | - | - | - | - | SVC | - | - | 21 ～ 60 | 16.5 ～ 100 | 0.3 ～ 10 | - | - | - | 0.7 ～ 2.99 | - | - | ||
- | 1 | Devis | 10 | SKD61 | -0.01/-0.02 | 0/-0.1 | ±0.015 | 3.5 | 1A | G | - | - | - | - | - | 14.5 ～ 118.6 | - | 21 ～ 60 | 16.5 ～ 120 | 0.5 ～ 15 | - | - | 2 ～ 60 | 1 ～ 3.49 | - | - | ||
- | 1 | Devis | 10 | SKD61 | -0.01/-0.02 | 0/-0.1 | ±0.015 | 3.5 | 1A | G | - | - | - | - | SVC | 14.5 ～ 118.6 | - | 21 ～ 60 | 16.5 ～ 120 | 0.5 ～ 15 | - | - | - | 1 ～ 3.49 | - | - | ||
- | 1 | Devis | 10 | SKD61 | -0.01/-0.02 | 0/-0.1 | ±0.015 | 3.5 | 1A | G | - | - | - | - | - | 14.5 ～ 118.6 | - | 21 ～ 60 | 16.5 ～ 120 | 0.5 ～ 15 | - | - | 2 ～ 60 | - | 0.7 ～ 0.99 | - | ||
- | 1 | Devis | 10 | SKD61 | -0.01/-0.02 | 0/-0.1 | ±0.015 | 3.5 | 1A | G | - | - | - | - | SVC | 14.5 ～ 118.6 | - | 21 ～ 60 | 16.5 ～ 120 | 0.5 ～ 15 | - | - | - | - | 0.7 ～ 0.99 | - | ||
- | 1 | Devis | 10 | SKD61 | -0.01/-0.02 | 0/-0.1 | ±0.015 | 3.5 | 1A | G | - | - | - | - | - | - | - | 21 ～ 60 | 16.5 ～ 120 | 0.5 ～ 15 | - | - | 2 ～ 60 | 1 ～ 3.49 | - | - | ||
- | 1 | Devis | 10 | SKD61 | -0.01/-0.02 | 0/-0.1 | ±0.015 | 3.5 | 1A | G | - | - | - | - | SVC | - | - | 21 ～ 60 | 16.5 ～ 120 | 0.5 ～ 15 | - | - | - | 1 ～ 3.49 | - | - | ||
- | 1 | Devis | 10 | SKD61 | -0.01/-0.02 | 0/-0.1 | ±0.015 | 3.5 | 1A | G | - | - | - | - | - | - | - | 21 ～ 60 | 16.5 ～ 120 | 0.5 ～ 15 | - | - | 2 ～ 60 | - | 0.7 ～ 0.99 | - | ||
- | 1 | Devis | 10 | SKD61 | -0.01/-0.02 | 0/-0.1 | ±0.015 | 3.5 | 1A | G | - | - | - | - | SVC | - | - | 21 ～ 60 | 16.5 ～ 120 | 0.5 ～ 15 | - | - | - | - | 0.7 ～ 0.99 | - | ||
- | 1 | Devis | 10 | SKD61 | -0.01/-0.02 | 0/-0.1 | ±0.015 | 4 | 1A | G | - | - | - | - | - | 14.5 ～ 118.6 | - | 21 ～ 60 | 16.5 ～ 120 | 0.5 ～ 15 | - | - | 2 ～ 60 | 1 ～ 3.99 | - | - | ||
- | 1 | Devis | 10 | SKD61 | -0.01/-0.02 | 0/-0.1 | ±0.015 | 4 | 1A | G | - | - | - | - | SVC | 14.5 ～ 118.6 | - | 21 ～ 60 | 16.5 ～ 120 | 0.5 ～ 15 | - | - | - | 1 ～ 3.99 | - | - | ||
- | 1 | Devis | 10 | SKD61 | -0.01/-0.02 | 0/-0.1 | ±0.015 | 4 | 1A | G | - | - | - | - | - | 14.5 ～ 118.6 | - | 21 ～ 60 | 16.5 ～ 120 | 0.5 ～ 15 | - | - | 2 ～ 60 | - | 0.7 ～ 0.99 | - | ||
- | 1 | Devis | 10 | SKD61 | -0.01/-0.02 | 0/-0.1 | ±0.015 | 4 | 1A | G | - | - | - | - | SVC | 14.5 ～ 118.6 | - | 21 ～ 60 | 16.5 ～ 120 | 0.5 ～ 15 | - | - | - | - | 0.7 ～ 0.99 | - | ||
- | 1 | Devis | 10 | SKD61 | -0.01/-0.02 | 0/-0.1 | ±0.015 | 4 | 1A | G | - | - | - | - | - | - | - | 21 ～ 60 | 16.5 ～ 120 | 0.5 ～ 15 | - | - | 2 ～ 60 | 1 ～ 3.99 | - | - | ||
- | 1 | Devis | 10 | SKD61 | -0.01/-0.02 | 0/-0.1 | ±0.015 | 4 | 1A | G | - | - | - | - | SVC | - | - | 21 ～ 60 | 16.5 ～ 120 | 0.5 ～ 15 | - | - | - | 1 ～ 3.99 | - | - | ||
- | 1 | Devis | 10 | SKD61 | -0.01/-0.02 | 0/-0.1 | ±0.015 | 4 | 1A | G | - | - | - | - | - | - | - | 21 ～ 60 | 16.5 ～ 120 | 0.5 ～ 15 | - | - | 2 ～ 60 | - | 0.7 ～ 0.99 | - | ||
- | 1 | Devis | 10 | SKD61 | -0.01/-0.02 | 0/-0.1 | ±0.015 | 4 | 1A | G | - | - | - | - | SVC | - | - | 21 ～ 60 | 16.5 ～ 120 | 0.5 ～ 15 | - | - | - | - | 0.7 ～ 0.99 | - | ||
- | 1 | Devis | 10 | SKD61 | -0.01/-0.02 | 0/-0.1 | ±0.015 | 4.5 | 1A | G | - | - | - | - | - | 14.5 ～ 118.6 | - | 21 ～ 60 | 16.5 ～ 120 | 0.5 ～ 15 | - | - | 2 ～ 60 | 1 ～ 4.49 | - | - | ||
- | 1 | Devis | 10 | SKD61 | -0.01/-0.02 | 0/-0.1 | ±0.015 | 4.5 | 1A | G | - | - | - | - | SVC | 14.5 ～ 118.6 | - | 21 ～ 60 | 16.5 ～ 120 | 0.5 ～ 15 | - | - | - | 1 ～ 4.49 | - | - | ||
- | 1 | Devis | 10 | SKD61 | -0.01/-0.02 | 0/-0.1 | ±0.015 | 4.5 | 1A | G | - | - | - | - | - | - | - | 21 ～ 60 | 16.5 ～ 120 | 0.5 ～ 15 | - | - | 2 ～ 60 | 1 ～ 4.49 | - | - | ||
- | 1 | Devis | 10 | SKD61 | -0.01/-0.02 | 0/-0.1 | ±0.015 | 4.5 | 1A | G | - | - | - | - | SVC | - | - | 21 ～ 60 | 16.5 ～ 120 | 0.5 ～ 15 | - | - | - | 1 ～ 4.49 | - | - | ||
- | 1 | Devis | 10 | SKD61 | -0.01/-0.02 | 0/-0.1 | ±0.015 | 5 | 1A | G | - | - | - | - | - | 14.5 ～ 118.6 | - | 21 ～ 60 | 16.5 ～ 120 | 0.5 ～ 15 | - | - | 2 ～ 60 | 1 ～ 4.99 | - | - | ||
- | 1 | Devis | 10 | SKD61 | -0.01/-0.02 | 0/-0.1 | ±0.015 | 5 | 1A | G | - | - | - | - | SVC | 14.5 ～ 118.6 | - | 21 ～ 60 | 16.5 ～ 120 | 0.5 ～ 15 | - | - | - | 1 ～ 4.99 | - | - | ||
- | 1 | Devis | 10 | SKD61 | -0.01/-0.02 | 0/-0.1 | ±0.015 | 5 | 1A | G | - | - | - | - | - | - | - | 21 ～ 60 | 16.5 ～ 120 | 0.5 ～ 15 | - | - | 2 ～ 60 | 1 ～ 4.99 | - | - | ||
- | 1 | Devis | 10 | SKD61 | -0.01/-0.02 | 0/-0.1 | ±0.015 | 5 | 1A | G | - | - | - | - | SVC | - | - | 21 ～ 60 | 16.5 ～ 120 | 0.5 ～ 15 | - | - | - | 1 ～ 4.99 | - | - | ||
- | 1 | Devis | 10 | SKD61 | -0.01/-0.02 | 0/-0.1 | ±0.015 | 5.5 | 1A | G | - | - | - | - | - | 14.5 ～ 118.15 | - | 21 ～ 60 | 16.5 ～ 120 | 0.5 ～ 15 | - | - | 2 ～ 60 | 1.5 ～ 5.49 | - | - | ||
- | 1 | Devis | 10 | SKD61 | -0.01/-0.02 | 0/-0.1 | ±0.015 | 5.5 | 1A | G | - | - | - | - | SVC | 14.5 ～ 118.15 | - | 21 ～ 60 | 16.5 ～ 120 | 0.5 ～ 15 | - | - | - | 1.5 ～ 5.49 | - | - | ||
- | 1 | Devis | 10 | SKD61 | -0.01/-0.02 | 0/-0.1 | ±0.015 | 5.5 | 1A | G | - | - | - | - | - | 14.5 ～ 118.15 | - | 21 ～ 60 | 16.5 ～ 120 | 0.5 ～ 15 | - | - | 2 ～ 60 | - | 1 ～ 1.49 | - | ||
- | 1 | Devis | 10 | SKD61 | -0.01/-0.02 | 0/-0.1 | ±0.015 | 5.5 | 1A | G | - | - | - | - | SVC | 14.5 ～ 118.15 | - | 21 ～ 60 | 16.5 ～ 120 | 0.5 ～ 15 | - | - | - | - | 1 ～ 1.49 | - | ||
- | 1 | Devis | 10 | SKD61 | -0.01/-0.02 | 0/-0.1 | ±0.015 | 5.5 | 1A | G | - | - | - | - | - | - | - | 21 ～ 60 | 16.5 ～ 120 | 0.5 ～ 15 | - | - | 2 ～ 60 | 1.5 ～ 5.49 | - | - | ||
- | 1 | Devis | 10 | SKD61 | -0.01/-0.02 | 0/-0.1 | ±0.015 | 5.5 | 1A | G | - | - | - | - | SVC | - | - | 21 ～ 60 | 16.5 ～ 120 | 0.5 ～ 15 | - | - | - | 1.5 ～ 5.49 | - | - | ||
- | 1 | Devis | 10 | SKD61 | -0.01/-0.02 | 0/-0.1 | ±0.015 | 5.5 | 1A | G | - | - | - | - | - | - | - | 21 ～ 60 | 16.5 ～ 120 | 0.5 ～ 15 | - | - | 2 ～ 60 | - | 1 ～ 1.49 | - | ||
- | 1 | Devis | 10 | SKD61 | -0.01/-0.02 | 0/-0.1 | ±0.015 | 5.5 | 1A | G | - | - | - | - | SVC | - | - | 21 ～ 60 | 16.5 ～ 120 | 0.5 ～ 15 | - | - | - | - | 1 ～ 1.49 | - |
Loading...
Informations de base
| Shape type | One-step gas release | Surface treatment | No | Head thickness | 4mm(T4) |
|---|---|---|---|---|---|
| Step (Step shape of the second step) | No second step |
Configurer
Propriétés de base
-
Material
- SKH51
- SKD61
- NAK80
- DH2F
-
Shaft diameter tolerance
- 0/-0.005
- -0.01/-0.02
-
L dimension tolerance
- +0.02/0
- 0/-0.1
-
Tip gradient tolerance
- ±0.01
- ±0.015
-
D/P (Shaft diameter)(mm)
-
Step (Step shape of the first step)
- 1A
- 1B
- 1C
- 1D
-
A (Step shape diameter)(mm)
-
C (Step type taper width)(mm)
-
CVC (Designation of C dimension in increments of 0.01mm)(mm)
-
DC (Gas release section diameter)(mm)
[6.92-6.999/0.001mmunités][7.92-7.999/0.001mmunités][9.92-9.999/0.001mmunités][12.92-12.999/0.001mmunités][0.92-0.995/0.005mmunités][1.42-1.495/0.005mmunités][1.92-1.995/0.005mmunités][2.42-2.495/0.005mmunités][2.92-2.995/0.005mmunités][3.42-3.495/0.005mmunités][3.92-3.995/0.005mmunités][4.42-4.495/0.005mmunités][4.92-4.995/0.005mmunités][5.42-5.495/0.005mmunités][5.92-5.995/0.005mmunités]
-
Extend the flat section SV to the bottom
- SVC
-
F (Bearing bore length)(mm)
-
G (Tip C chamfering width)(mm)
-
K (Tip angle)(°)
-
L (L dimension)(mm)
-
N (Gas release section diameter)(mm)
-
Q (Tip R chamfering)(mm)
-
S (Tip tapered width)(mm)
-
SV (Gas release facet cutting length)(mm)
-
V (Tip diameter)(mm)
-
VC (V dimension alteration(mm)
-
When DC = D
- DCX
-
Type
- GV-CPD-1A
- GV-CPD-1AB
- GV-CPD-1AC
- GV-CPD-1AG
- GV-CPD-1AR
- GV-CPD-1AT
- GV-CPD-1B
- GV-CPD-1BB
- GV-CPD-1BC
- GV-CPD-1BG
- GV-CPD-1BR
- GV-CPD-1BT
- GV-CPD-1C
- GV-CPD-1CB
- GV-CPD-1CC
- GV-CPD-1CG
- GV-CPD-1CR
- GV-CPD-1CT
- GV-CPD-1D
- GV-CPD-1DB
- GV-CPD-1DC
- GV-CPD-1DG
- GV-CPD-1DR
- GV-CPD-1DT
- GV-CPF-1A
- GV-CPF-1AB
- GV-CPF-1AC
- GV-CPF-1AG
- GV-CPF-1AR
- GV-CPF-1AT
- GV-CPF-1B
- GV-CPF-1BB
- GV-CPF-1BC
- GV-CPF-1BG
- GV-CPF-1BR
- GV-CPF-1BT
- GV-CPF-1C
- GV-CPF-1CB
- GV-CPF-1CC
- GV-CPF-1CG
- GV-CPF-1CR
- GV-CPF-1CT
- GV-CPF-1D
- GV-CPF-1DB
- GV-CPF-1DC
- GV-CPF-1DG
- GV-CPF-1DR
- GV-CPF-1DT
- GV-CPG-1A
- GV-CPG-1AB
- GV-CPG-1AC
- GV-CPG-1AG
- GV-CPG-1AR
- GV-CPG-1AT
- GV-CPG-1B
- GV-CPG-1BB
- GV-CPG-1BC
- GV-CPG-1BG
- GV-CPG-1BR
- GV-CPG-1BT
- GV-CPG-1C
- GV-CPG-1CB
- GV-CPG-1CC
- GV-CPG-1CG
- GV-CPG-1CR
- GV-CPG-1CT
- GV-CPG-1D
- GV-CPG-1DB
- GV-CPG-1DC
- GV-CPG-1DG
- GV-CPG-1DR
- GV-CPG-1DT
- GV-CPH-1A
- GV-CPH-1AB
- GV-CPH-1AC
- GV-CPH-1AG
- GV-CPH-1AR
- GV-CPH-1AT
- GV-CPH-1B
- GV-CPH-1BB
- GV-CPH-1BC
- GV-CPH-1BG
- GV-CPH-1BR
- GV-CPH-1BT
- GV-CPH-1C
- GV-CPH-1CB
- GV-CPH-1CC
- GV-CPH-1CG
- GV-CPH-1CR
- GV-CPH-1CT
- GV-CPH-1D
- GV-CPH-1DB
- GV-CPH-1DC
- GV-CPH-1DG
- GV-CPH-1DR
- GV-CPH-1DT
- GV-CPK-1A
- GV-CPK-1AB
- GV-CPK-1AC
- GV-CPK-1AG
- GV-CPK-1AR
- GV-CPK-1AT
- GV-CPK-1B
- GV-CPK-1BB
- GV-CPK-1BC
- GV-CPK-1BG
- GV-CPK-1BR
- GV-CPK-1BT
- GV-CPK-1C
- GV-CPK-1CB
- GV-CPK-1CC
- GV-CPK-1CG
- GV-CPK-1CR
- GV-CPK-1CT
- GV-CPK-1D
- GV-CPK-1DB
- GV-CPK-1DC
- GV-CPK-1DG
- GV-CPK-1DR
- GV-CPK-1DT
- GV-CPN-1A
- GV-CPN-1AB
- GV-CPN-1AC
- GV-CPN-1AG
- GV-CPN-1AR
- GV-CPN-1AT
- GV-CPN-1B
- GV-CPN-1BB
- GV-CPN-1BC
- GV-CPN-1BG
- GV-CPN-1BR
- GV-CPN-1BT
- GV-CPN-1C
- GV-CPN-1CB
- GV-CPN-1CC
- GV-CPN-1CG
- GV-CPN-1CR
- GV-CPN-1CT
- GV-CPN-1D
- GV-CPN-1DB
- GV-CPN-1DC
- GV-CPN-1DG
- GV-CPN-1DR
- GV-CPN-1DT
- GV-CPP-1A
- GV-CPP-1AB
- GV-CPP-1AC
- GV-CPP-1AG
- GV-CPP-1AR
- GV-CPP-1AT
- GV-CPP-1B
- GV-CPP-1BB
- GV-CPP-1BC
- GV-CPP-1BG
- GV-CPP-1BR
- GV-CPP-1BT
- GV-CPP-1C
- GV-CPP-1CB
- GV-CPP-1CC
- GV-CPP-1CG
- GV-CPP-1CR
- GV-CPP-1CT
- GV-CPP-1D
- GV-CPP-1DB
- GV-CPP-1DC
- GV-CPP-1DG
- GV-CPP-1DR
- GV-CPP-1DT
- GV-CPX-1A
- GV-CPX-1AB
- GV-CPX-1AC
- GV-CPX-1AG
- GV-CPX-1AR
- GV-CPX-1AT
- GV-CPX-1B
- GV-CPX-1BB
- GV-CPX-1BC
- GV-CPX-1BG
- GV-CPX-1BR
- GV-CPX-1BT
- GV-CPX-1C
- GV-CPX-1CB
- GV-CPX-1CC
- GV-CPX-1CG
- GV-CPX-1CR
- GV-CPX-1CT
- GV-CPX-1D
- GV-CPX-1DB
- GV-CPX-1DC
- GV-CPX-1DG
- GV-CPX-1DR
- GV-CPX-1DT
-
Shape (Tip shape)
- No processing
- C
- G
- T
- R
- B
-
Filtrer par type de données CAO
- 2D
- 3D
Propriétés optionnelles
- Les spécifications et les dimensions de certaines pièces peuvent ne pas être intégralement indiquées. Pour plus de détails, reportez-vous aux catalogues des fabricants .
Assistance technique
Mode de paiement
Fabrication à la demande
Certificats
Copyright © MISUMI Corporation All Rights Reserved.