European Standard Side Straight Block Sets
Référence pièce
Vous pouvez trouver ici le numéro
de référence lié au produit recherché.
Drawing / Product specification
| Part No. | V Tolerance | Positioning precision (Clearance) | V dimension symmetry against A plane | [ M ] | [ H ] | |
| ①Pin | ②Bushing | |||||
| D-TSSBH07 | 0 －0.007 | ＋0.012 ＋0.005 | 0.005 ~ 0.015 | 0.005 or less | SKS3 | 53~58HRC |
Numéro de référence :
- Afin d'afficher l'aperçu 3D, merci de configurer votre pièce
L'aperçu 3D n'est pas disponible, car aucun code article n'a été généré.
Loading...
| Référence pièce | Quantité minimale de commande | Remise sur volume | A (External shape) (mm) | E (Convex length) (mm) | |
|---|---|---|---|---|---|
| 1 | Disponible | Devis | 40 | 20 | |
| 1 | Disponible | Devis | 40 | 40 | |
| 1 | Disponible | Devis | 45 | 25 | |
| 1 | Disponible | Devis | 45 | 50 | |
| 1 | Disponible | Devis | 50 | 32 | |
| 1 | Disponible | Devis | 50 | 63 | |
| 1 | Disponible | Devis | 63 | 40 | |
| 1 | Disponible | Devis | 63 | 80 | |
| 1 | Disponible | Devis | 85 | 50 | |
| 1 | Disponible | Devis | 85 | 100 | |
| 1 | Disponible | Devis | 100 | 56 | |
| 1 | Disponible | Devis | 100 | 112 |
Loading...
Specification table
| V | T | R | Bolt Hole | L | L1 | L2 | L3 | L4 | Part No. | E | |||||||
| P | Q1 | Q2 | d1 | d2 | d3 | d4 | Type | A | |||||||||
| 16 | 22 | 6 | 26 | 7 | 15 | 11 | 6.6 | 10.3 | 6.3 | 20 | 6.9 | 11 | 12 | 6.2 | D-TSSBH07 (①＋②Set) | 40 | 20 |
| 40 | |||||||||||||||||
| 20 | 27 | 31 | 19 | 22 | 13 | 14 | 45 | 25 | |||||||||
| 50 | |||||||||||||||||
| 25 | 36 | 8 | 35 | 9 | 27 | 25 | 14 | 15 | 50 | 32 | |||||||
| 63 | |||||||||||||||||
| 32 | 46 | 45 | 11 | 35 | 15 | 9 | 15 | 9 | 32 | 9 | 19 | 20 | 9 | 63 | 40 | ||
| 80 | |||||||||||||||||
| 40 | 56 | 10 | 60 | 15 | 40 | 18 | 11 | 18 | 11 | 36 | 11 | 22 | 23 | 11 | 85 | 50 | |
| 100 | |||||||||||||||||
| 50 | 66 | 74 | 18 | 48 | 20 | 14 | 20 | 14 | 40 | 13 | 24 | 25 | 13 | 100 | 56 | ||
| 112 | |||||||||||||||||
Order Example
| Part No. | - | A | - | E | ||
| D-TSSBH07 | - | 45 | - | 25 | ||
Overview・Characteristics
| ■Features ・Suitable for positioning in precision molds such as connector and electronic device. ・It is capable of preventing wear and damage in core pins since it can be positioned before core pins and such are inlayed on cavity. ・Positioning is easily performed by simultaneously processing plates in piles (refers to drawing on the right). ・Use precision leader pins since clearance is fairly small. ・There are lubricant coating on the sliding part of the side block sets and on both sides of the pin. ・The oil grooves that oil is fed to the sliding part, thus preventing the straight locating block set from scuffing or seizing. ■Usage ・Contacting the pin and bushing when mold is closed may cause damage. Please leave a clearance of about 1mm on PL. |  |
Example Use
Informations de base
| Brand | C-VALUE | Components | Set (Pin + Bushing) | Shape type | Block |
|---|---|---|---|---|---|
| Tapered or straight | Straight shape | Mounting type | Side installation | Ext. dia./External tolerance | -0.009/-0.016 |
| Clearance of straight shape | 0.005～0.015 | Symmetry against straight/tapered section | 0.005 or less | With/without oil groove | Provided |
| Material | SKS3 |
Configurer
Propriétés de base
-
Type
- D-TSSBH07
-
A (External shape)(mm)
-
E (Convex length)(mm)
-
Filtrer par type de données CAO
- 2D
- 3D
Propriétés optionnelles
- Les spécifications et les dimensions de certaines pièces peuvent ne pas être intégralement indiquées. Pour plus de détails, reportez-vous aux catalogues des fabricants .
Assistance technique
Mode de paiement
Fabrication à la demande
Certificats
Copyright © MISUMI Corporation All Rights Reserved.