TSC series carbide square end mill, 2-flute / 4D Flute Length (long) model (TSC-EM2L9.80)
- Remise sur volume
Détails du produit:
Référence fabricant: TSC-EM2L9.80
Marque: MISUMI
Prix: 88.06 €
Délai de livraison: 13 jours
Données techniques:
Outer Diameter (D): 9.8 φ
Flute Length (ℓ): 40 mm
Shank Diameter (d): 10 mm
Overall Length (L): 100 mm
Length Under Neck (ℓ1): - mm
- TS
- General Steel
- 2 Flutes
- L (Long)
Référence pièce
Vous pouvez trouver ici le numéro
de référence lié au produit recherché.
TSC-EM2L9.80
Référence pièce
|
|---|
| TSC-EM2L9.80 |
| Référence pièce |
Prix unitaire standard
| Quantité minimale de commande | Remise sur volume | Outer Diameter (D) (φ) | Flute Length (ℓ) (mm) | Shank Diameter (d) (mm) | Overall Length (L) (mm) | Length Under Neck (ℓ1) (mm) | Processing Applications | Geometry | Additional Classification | Figure | ● Inventory Product □ Manufacturer Product | |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
88.06 € | 1 | Disponible | 13 jours | 9.8 | 40 | 10 | 100 | - | Flat Surface / Side Surface / Rainure / Inclined Cutting | Avec engagement | Manufactured Product | 1 | □ |
Loading...
Spécifications
Model Number
TSC-EM2L (Standard)
| Outer Diameter D |
Flute Length ℓ |
Overall Length L |
Shank Diameter d |
Figure | ● Stocked Product □ Manufactured Product |
| 1 | 4 | 45 | 4 | 1 | ● |
| 1.5 | 6 | 45 | 4 | 1 | ● |
| 2 | 8 | 45 | 4 | 1 | ● |
| 2.5 | 10 | 45 | 4 | 1 | ● |
| 3 | 12 | 50 | 6 | 1 | ● |
| 3.01 ~ 3.49 | 14 | 50 | 6 | 1 | □ |
| 3.5 | 14 | 50 | 6 | 1 | ● |
| 3.51 ~ 3.99 | 16 | 60 | 6 | 1 | □ |
| 4 | 16 | 60 | 6 | 1 | ● |
| 4.01 ~ 4.49 | 18 | 60 | 6 | 1 | □ |
| 4.5 | 18 | 60 | 6 | 1 | ● |
| 4.51 ~ 4.99 |
20 |
60 |
6 |
1 | □ |
| 5 |
20 |
60 |
6 |
1 | ● |
| 5.01 ~ 5.49 |
22 |
60 |
6 |
1 | □ |
| 5.5 |
22 |
60 |
6 |
1 | ● |
| 5.51 ~ 5.99 |
24 |
60 |
6 |
1 | □ |
| 6 |
24 |
60 |
6 |
2 | ● |
| 7.51 ~ 7.99 |
32 |
100 |
8 |
1 | □ |
| 8 |
32 |
100 |
8 |
2 | ● |
| 9.51 ~ 9.99 |
40 |
100 |
10 |
1 | □ |
| 10 |
40 |
100 |
10 |
2 | ● |
| 11.51 ~ 11.99 |
48 |
100 |
12 |
1 | □ |
| 12 |
48 |
100 |
12 |
2 | ● |
[ ! ]Outer diameters of manufactured products are designated in 0.01 mm increments
For Cutting Conditions, Refer to >>Click here.
TSC-PEM2L (Sharp Edge)
| Outer Diameter D |
Flute Length ℓ |
Overall Length L |
Shank Diameter d |
Figure | ● Stocked Product □ Manufactured Product |
| 1 | 4 | 45 | 4 | 1 | ● |
| 1.5 | 6 | 45 | 4 | 1 | ● |
| 2 | 8 | 45 | 4 | 1 | ● |
| 2.5 | 10 | 45 | 4 | 1 | ● |
| 3 | 12 | 50 | 6 | 1 | ● |
| 3.01 ~ 3.49 | 14 | 50 | 6 | 1 | □ |
| 3.5 | 14 | 50 | 6 | 1 | ● |
| 3.51 ~ 3.99 | 16 | 60 | 6 | 1 | □ |
| 4 | 16 | 60 | 6 | 1 | ● |
| 4.01 ~ 4.49 | 18 | 60 | 6 | 1 | □ |
| 4.5 | 18 | 60 | 6 | 1 | ● |
| 4.51 ~ 4.99 |
20 |
60 |
6 |
1 | □ |
| 5 |
20 |
60 |
6 |
1 | ● |
| 5.01 ~ 5.49 |
22 |
60 |
6 |
1 | □ |
| 5.5 |
22 |
60 |
6 |
1 | ● |
| 5.51 ~ 5.99 |
24 |
60 |
6 |
1 | □ |
| 6 |
24 |
60 |
6 |
2 | ● |
| 7.51 ~ 7.99 |
32 |
100 |
8 |
1 | □ |
| 8 |
32 |
100 |
8 |
2 | ● |
| 9.51 ~ 9.99 |
40 |
100 |
10 |
1 | □ |
| 10 |
40 |
100 |
10 |
2 | ● |
| 11.51 ~ 11.99 |
48 |
100 |
12 |
1 | □ |
| 12 |
48 |
100 |
12 |
2 | ● |
[ ! ]Outer diameters of manufactured products are designated in 0.01 mm increments
For Cutting Conditions, Refer to >>Click here.
Plus d'informations
● It has a TS film coating with much greater oxidation resistance and hardness than conventional films, resulting in a longer operational life and ideal for high speed machining / dry machining.
Informations de base
| Work Material | General Steel / Heat-Treated Steel / Acier inoxydable / Fonte / Aluminum Alloy / Copper Alloy | Number of Flutes(sheet) | 2 | Model | Carré |
|---|---|---|---|---|---|
| Coating | For High Hardness (Silicone-Based) | Torsion Angle (θ) | Standard Helix (30 to 40°) | Tolerance of OD(mm) | 0 ~ -0.02 |
Vous vous trouvez sur la page de TSC series carbide square end mill, 2-flute / 4D Flute Length (long) model, le numéro d'article est le suivant: TSC-EM2L9.80.
Veuillez trouver plus de détails concernant les particularités et les dimensions sous le numéro d'article TSC-EM2L9.80.
Configurer
Propriétés de base
-
Length Under Neck (ℓ1)(mm)
-
Processing Applications
- Flat Surface
- Side Surface
- Rainure
- Inclined Cutting
- Countersunk
-
Type
- SN-TSC-EM2L
- SN-TSC-PEM2L
- SNR-TSC-EM2L
- SNR-TSC-PEM2L
- TSC-EM2L
- TSC-PEM2L
-
Outer Diameter (D)(φ)
-
Flute Length (ℓ)(mm)
-
Shank Diameter (d)(mm)
-
Overall Length (L)(mm)
-
Geometry
- Sharp Corner
- Avec engagement
-
Additional Classification
- Cutting Edge R Processing
- Manufactured Product
- Standard Neck Relief
- Stocked Product
Filtrer par jours d'expédition standard
-
- Tous les articles
- 5 jours ou moins
- 7 jours ou moins
- 8 jours ou moins
- 13 jours ou moins
Propriétés optionnelles
- Les spécifications et les dimensions de certaines pièces peuvent ne pas être intégralement indiquées. Pour plus de détails, reportez-vous aux catalogues des fabricants .
Variantes de ce produit
| Référence pièce |
|---|
| TSC-EM2L11.51 |
| TSC-EM2L11.70 |
| TSC-EM2L11.80 |
| TSC-EM2L9.90 |
| TSC-PEM2L1 |
| TSC-PEM2L1.5 |
| Référence pièce | Prix unitaire standard | Quantité minimale de commande | Remise sur volume | Jour d'expédition standard ? | Outer Diameter (D) (φ) | Flute Length (ℓ) (mm) | Shank Diameter (d) (mm) | Overall Length (L) (mm) | Length Under Neck (ℓ1) (mm) | Processing Applications | Geometry | Additional Classification | Figure | ● Inventory Product □ Manufacturer Product |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
82.46 € | 1 | Disponible | 13 jours | 11.51 | 48 | 12 | 100 | - | Inclined Cutting / Rainure / Flat Surface / Side Surface | Avec engagement | Manufactured Product | 1 | □ | |
82.46 € | 1 | Disponible | 13 jours | 11.7 | 48 | 12 | 100 | - | Inclined Cutting / Rainure / Flat Surface / Side Surface | Avec engagement | Manufactured Product | 1 | □ | |
82.46 € | 1 | Disponible | 13 jours | 11.8 | 48 | 12 | 100 | - | Inclined Cutting / Rainure / Flat Surface / Side Surface | Avec engagement | Manufactured Product | 1 | □ | |
88.06 € | 1 | Disponible | 13 jours | 9.9 | 40 | 10 | 100 | - | Inclined Cutting / Rainure / Flat Surface / Side Surface | Avec engagement | Manufactured Product | 1 | □ | |
18.18 € | 1 | Disponible | 5 jours | 1 | 4 | 4 | 45 | - | Inclined Cutting / Rainure / Flat Surface / Side Surface | Sharp Corner | Stocked Product | 1 | ● | |
18.18 € | 1 | Disponible | 5 jours | 1.5 | 6 | 4 | 45 | - | Inclined Cutting / Rainure / Flat Surface / Side Surface | Sharp Corner | Stocked Product | 1 | ● |
Assistance technique
Mode de paiement
Fabrication à la demande
Certificats
Copyright © MISUMI Corporation All Rights Reserved.