• Marques
  • Société
  • Contact
FR
Type Code Seach | *NOT READY*
#CODE
Suggestion de mots-clés
Suggestions de numéros d'articles
Produits discontinués

TSC series carbide long neck square end mill, 2-flute / long neck model (TSC-EM2LB2.5-30)

TSC series carbide long neck square end mill, 2-flute / long neck model TSC-EM2LB2.5-30

Cliquez sur cette image pour l'agrandir.

Cliquez sur cette image pour l'agrandir.

  • TSC series carbide long neck square end mill, 2-flute / long neck model
  • TSC series carbide long neck square end mill, 2-flute / long neck model
  • TSC series carbide long neck square end mill, 2-flute / long neck model
  • Remise sur volume

MISUMI

MISUMI

Détails du produit:

Référence fabricant: TSC-EM2LB2.5-30

Marque: MISUMI

Prix: 21.94 €

Délai de livraison: 5 jours


Données techniques:

Outer Diameter (D): 2.5 φ

Flute Length (ℓ): 3.8 mm

Shank Diameter (d): 4 mm

Overall Length (L): 70 mm

Length Under Neck (ℓ1): 30 mm


  • TS
  • General Steel
  • 2 Flutes

Référence pièce

Vous pouvez trouver ici le numéro
de référence lié au produit recherché.

TSC-EM2LB2.5-30

TSC series carbide long neck square end mill, 2-flute / long neck model:Related Image

Données à afficher
30
45
60
  1. 1
Référence pièce
TSC-EM2LB2.5-30
Référence pièce
Prix unitaire standard
Quantité minimale de commandeRemise sur volume
Jour
d'expédition standard
?
Outer Diameter (D)
(φ) 		Flute Length (ℓ)
(mm) 		Shank Diameter (d)
(mm) 		Overall Length (L)
(mm) 		Length Under Neck (ℓ1)
(mm) 		Processing Applications Geometry Torsion Angle (θ) Additional Classification Figure ● Inventory Product □ Manufacturer Product Under Neck Diameter d1
(mm) 		Actual Effective Length Depends on Work Inclination Angle 30'
(mm) 		Actual Effective Length Depends on Work Inclination Angle 1°
(mm) 		Actual Effective Length Depends on Work Inclination Angle 2°
(mm) 		Actual Effective Length Depends on Work Inclination Angle 3°
(mm) 		Length Under Neck (θ)

21.94 €

1 Disponible 5 jours 2.53.847030Flat Surface / Side Surface / Rainure / Inclined CuttingAvec engagementStandard Helix (30 to 40°)Stocked Product1●2.431.4132.97Without InterferenceWithout Interference10°

Loading...

  1. 1

Spécifications

TSC series carbide long neck square end mill, 2-flute / long neck model:Related Image

Model Number
TSC-PEM2LB (Sharp Edge / Stocked Product) / TSC-EM2LB (Standard / Stocked Product)

Outer Diameter
D		 Length Under Neck
ℓ1		 Shank Diameter
d		 Shank Diameter
d		 Standard Sharp Edge Flute Length
ℓ		 Under Neck Diameter
d1		 Overall Length
L		 Under Neck Angle
θ		 Actual Effective Length Depends on Work Inclination Angle Figure
30' 1° 2° 3°
0.1 0.3 - 4 No Standards ● 0.2 0.085 50 10° 0.31 0.33 0.37 0.41 1
0.5 No Standards ● 0.52 0.55 0.61 0.69
1 No Standards ● 1.05 1.10 1.22 1.37
0.2 0.5 - 4 No Standards ● 0.3 0.18 50 10° 0.52 0.55 0.61 0.69 1
1 ● ● 1.05 1.10 1.22 1.37
1.5 ● ● 1.57 1.65 1.83 2.06
2 No Standards ● 2.09 2.20 2.44 2.75
2.5 No Standards ● 2.62 2.75 3.05 3.43
3 No Standards ● 3.14 3.30 3.66 4.12
3.5 No Standards ● 3.66 3.85 4.27 4.81
4 No Standards ● 4.19 4.40 4.88 5.49
0.3 1 - 4 ● ● 0.45 0.28 50 10° 1.05 1.10 1.22 1.37 1
1.5 No Standards ● 1.57 1.65 1.83 2.06
2 ● ● 2.09 2.20 2.44 2.75
2.5 No Standards ● 2.62 2.75 3.05 3.43
3 ● ● 3.14 3.30 3.66 4.12
4 ● ● 4.19 4.40 4.88 5.49
5 ● ● 5.24 5.49 6.10 6.87
6 No Standards ● 6.28 6.59 7.32 8.24
9 No Standards ● 9.42 9.89 10.98 12.36
0.4 1 - 4 No Standards ● 0.6 0.37 50 10° 1.05 1.10 1.22 1.37 1
2 ● ● 2.09 2.20 2.44 2.75
2 6 6 ● ● 15° 2.06 2.13 2.28 2.45
3 - 4 ● ● 10° 3.14 3.30 3.66 4.12
4 ● ● 4.19 4.40 4.88 5.49
5 ● ● 5.24 5.49 6.10 6.87
6 ● ● 6.28 6.59 7.32 8.24
7 No Standards ● 7.33 7.69 8.54 9.61
8 No Standards ● 8.38 8.79 9.76 10.98
9 No Standards ● 9.42 9.89 10.98 12.36
10 No Standards ● 10.47 10.99 12.21 13.73
12 No Standards ● 12.57 13.19 14.65 16.48

[ ! ]For shank diameter (d) specifications listed in blue, specify a outer diameter (D), shank length (ℓ1) and shank diameter (d).

Model Number
TSC-PEM2LB (Sharp Edge / Stocked Product) / TSC-EM2LB (Standard / Stocked Product)

Outer Diameter
D		 Length Under Neck
ℓ1		 Shank Diameter
d		 Shank Diameter
d		 Standard Sharp Edge Flute Length
ℓ		 Under Neck Diameter
d1		 Overall Length
L		 Under Neck Angle
θ		 Actual Effective Length Depends on Work Inclination Angle Figure
30' 1° 2° 3°
0.5 1 - 4 No Standards ● 0.7 0.46 50 10° 1.05 1.10 1.22 1.37 1
2 ● ● 2.09 2.20 2.44 2.75
3 No Standards ● 3.14 3.30 3.66 4.12
4 ● ● 4.19 4.40 4.88 5.49
4 6 6 ● ● 15° 4.13 4.26 4.56 4.91
5 - 4 No Standards ● 10° 5.24 5.49 6.10 6.87
6 ● ● 6.28 6.59 7.32 8.24
7 No Standards ● 7.33 7.69 8.54 9.61
8 ● ● 8.38 8.79 9.76 10.98
9 No Standards ● 9.42 9.89 10.98 12.36
10 ● ● 10.47 10.99 12.21 13.73
12 ● ● 12.57 13.19 14.65 16.48
15 ● ● 15.71 16.48 18.31 20.60
0.6 2 - 4 ● ● 0.9 0.56 50 10° 2.09 2.20 2.44 2.75 1
3 No Standards ● 3.14 3.30 3.66 4.12
4 ● ● 4.19 4.40 4.88 5.49
4 6 6 ● ● 15° 4.13 4.26 4.56 4.91
6 - 4 ● ● 10° 6.28 6.59 7.32 8.24
7 No Standards ● 7.33 7.69 8.54 9.61
8 ● ● 8.38 8.79 9.76 10.98
10 ● ● 10.47 10.99 12.21 13.73
12 ● ● 12.57 13.19 14.65 16.48
15 ● ● 15.71 16.48 18.31 20.60
18 No Standards ● 70 18.85 19.78 21.97 24.71
0.7 2 - 4 ● ● 1.05 0.66 50 10° 2.09 2.20 2.44 2.75 1
4 ● ● 4.19 4.40 4.88 5.49
6 ● ● 6.28 6.59 7.32 8.24
8 ● ● 8.38 8.79 9.76 10.98
10 No Standards ● 10.47 10.99 12.21 13.73
0.8 4 - 4 ● ● 1.2 0.76 50 10° 4.19 4.40 4.88 5.49 1
6 ● ● 6.28 6.59 7.32 8.24
8 ● ● 8.38 8.79 9.76 10.98
10 ● ● 10.47 10.99 12.21 13.73
12 ● ● 12.57 13.19 14.65 16.48
14 No Standards ● 14.66 15.39 17.09 19.22
16 No Standards ● 16.75 17.58 19.53 21.97
20 No Standards ● 70 20.94 21.98 24.41 27.46
24 No Standards ● 25.13 26.38 29.29 Without Interference
0.9 4 - 4 No Standards ● 1.35 0.85 50 10° 4.19 4.40 4.88 5.49 1
6 ● ● 6.28 6.59 7.32 8.24
8 ● ● 8.38 8.79 9.76 10.98
10 No Standards ● 10.47 10.99 12.21 13.73
15 No Standards ● 15.71 16.48 18.31 20.60
1 3 - 4 No Standards ● 1.5 0.95 50 10° 3.14 3.30 3.66 4.12 1
4 ● ● 4.19 4.40 4.88 5.49
5 No Standards ● 5.24 5.49 6.10 6.87
6 ● ● 6.28 6.59 7.32 8.24
6 6 6 ● ● 15° 6.19 6.39 6.84 7.36
7 - 4 No Standards ● 10° 7.33 7.69 8.54 9.61
8 ● ● 8.38 8.79 9.76 10.98
9 No Standards ● 9.42 9.89 10.98 12.36
10 ● ● 10.47 10.99 12.21 13.73
12 ● ● 12.57 13.19 14.65 16.48
14 ● ● 14.66 15.39 17.09 19.22
16 ● ● 16.75 17.58 19.53 21.97
18 No Standards ● 70 18.85 19.78 21.97 24.71
20 ● ● 20.94 21.98 24.41 27.46
22 No Standards ● 23.04 24.18 26.85 Without Interference
25 ● ● 26.18 27.47 30.51 Without Interference
30 ● ● 31.41 32.97 36.62 Without Interference
1.2 6 - 4 ● ● 1.8 1.15 50 10° 6.28 6.59 7.32 8.24 1
8 ● ● 8.38 8.79 9.76 10.98
10 ● ● 10.47 10.99 12.21 13.73
12 ● ● 12.57 13.19 14.65 16.48
16 ● ● 16.75 17.58 19.53 21.97

[ ! ]For shank diameter (d) specifications listed in blue, specify a outer diameter (D), shank length (ℓ1) and shank diameter (d).

Model Number
TSC-PEM2LB (Sharp Edge / Stocked Product) / TSC-EM2LB (Standard / Stocked Product)

Outer Diameter
D		 Length Under Neck
ℓ1		 Shank Diameter
d		 Shank Diameter
d		 Standard Sharp Edge Flute Length
ℓ		 Under Neck Diameter
d1		 Overall Length
L		 Under Neck Angle
θ		 Actual Effective Length Depends on Work Inclination Angle Figure
30' 1° 2° 3°
1.4 6 - 4 No Standards ● 2.1 1.35 50 10° 6.28 6.59 7.32 8.24 1
8 No Standards ● 8.38 8.79 9.76 10.98
10 No Standards ● 10.47 10.99 12.21 13.73
12 No Standards ● 12.57 13.19 14.65 16.48
14 No Standards ● 14.66 15.39 17.09 19.22
16 No Standards ● 16.75 17.58 19.53 21.97
1.5 4 - 4 No Standards ● 2.3 1.45 50 10° 4.19 4.40 4.88 5.49 1
6 ● ● 6.28 6.59 7.32 8.24
8 ● ● 8.38 8.79 9.76 10.98
10 ● ● 10.47 10.99 12.21 13.73
12 ● ● 12.57 13.19 14.65 16.48
14 ● ● 14.66 15.39 17.09 19.22
16 ● ● 16.75 17.58 19.53 21.97
18 ● ● 70 18.85 19.78 21.97 24.71
20 ● ● 20.94 21.98 24.41 Without Interference
25 No Standards ● 26.18 27.47 30.51 Without Interference
30 No Standards ● 31.41 32.97 Without Interference Without Interference
35 No Standards ● 100 36.65 38.46 Without Interference Without Interference
40 No Standards ● 41.88 43.96 Without Interference Without Interference
45 No Standards ● 47.12 49.45 Without Interference Without Interference
1.6 6 - 4 No Standards ● 2.4 1.55 50 10° 6.28 6.59 7.32 8.24 1
8 No Standards ● 8.38 8.79 9.76 10.98
10 No Standards ● 10.47 10.99 12.21 13.73
12 No Standards ● 12.57 13.19 14.65 16.48
14 No Standards ● 14.66 15.39 17.09 19.22
16 No Standards ● 16.75 17.58 19.53 21.97
18 No Standards ● 70 18.85 19.78 21.97 Without Interference
20 No Standards ● 20.94 21.98 24.41 Without Interference
26 No Standards ● 27.22 28.57 31.73 Without Interference
1.8 6 - 4 No Standards ● 2.7 1.75 50 10° 6.28 6.59 7.32 8.24 1
8 No Standards ● 8.38 8.79 9.76 10.98
10 No Standards ● 10.47 10.99 12.21 13.73
12 No Standards ● 12.57 13.19 14.65 16.48
14 No Standards ● 14.66 15.39 17.09 19.22
16 No Standards ● 16.75 17.58 19.53 Without Interference
18 No Standards ● 70 18.85 19.78 21.97 Without Interference
20 No Standards ● 20.94 21.98 24.41 Without Interference
25 No Standards ● 26.18 27.47 30.51 Without Interference
2 6 - 4 ● ● 3 1.95 50 10° 6.28 6.59 7.32 8.24 1
8 ● ● 8.38 8.79 9.76 10.98
10 ● ● 10.47 10.99 12.21 13.73
10 6 6 ● ● 15° 10.31 10.65 11.40 12.27
12 - 4 ● ● 10° 12.57 13.19 14.65 16.48
14 ● ● 14.66 15.39 17.09 19.22
16 ● ● 16.75 17.58 19.53 Without Interference
18 ● ● 70 18.85 19.78 21.97 Without Interference
20 ● ● 20.94 21.98 24.41 Without Interference
25 ● ● 26.18 27.47 Without Interference Without Interference
30 ● ● 31.41 32.97 Without Interference Without Interference
35 No Standards ● 100 36.65 38.46 Without Interference Without Interference
40 No Standards ● 41.88 43.96 Without Interference Without Interference
50 No Standards ● 52.35 54.95 Without Interference Without Interference
60 No Standards ● 62.83 Without Interference Without Interference Without Interference
2.5 8 - 4 ● ● 3.8 2.4 50 10° 8.38 8.79 9.76 10.98 1
10 No Standards ● 10.47 10.99 12.21 13.73
12 ● ● 12.57 13.19 14.65 Without Interference
14 No Standards ● 14.66 15.39 17.09 Without Interference
16 ● ● 16.75 17.58 19.53 Without Interference
18 No Standards ● 70 18.85 19.78 Without Interference Without Interference
20 ● ● 20.94 21.98 Without Interference Without Interference
25 ● ● 26.18 27.47 Without Interference Without Interference
30 ● ● 31.41 32.97 Without Interference Without Interference
40 No Standards ● 100 41.88 Without Interference Without Interference Without Interference
50 No Standards ● 52.35 Without Interference Without Interference Without Interference

[ ! ]For shank diameter (d) specifications listed in blue, specify a outer diameter (D), shank length (ℓ1) and shank diameter (d).

Model Number
TSC-PEM2LB (Sharp Edge / Stocked Product) / TSC-EM2LB (Standard / Stocked Product)

Outer Diameter
D		 Length Under Neck
ℓ1		 Shank Diameter
d		 Shank Diameter
d		 Standard Sharp Edge Flute Length
ℓ		 Under Neck Diameter
d1		 Overall Length
L		 Under Neck Angle
θ		 Actual Effective Length Depends on Work Inclination Angle Figure
30' 1° 2° 3°
3 8 - 6 ● ● 4.5 2.9 50 10° 8.38 8.79 9.76 10.98 1
10 No Standards ● 10.47 10.99 12.21 13.73
12 ● ● 12.57 13.19 14.65 16.48
14 No Standards ● 70 14.66 15.39 17.09 19.22
16 ● ● 16.75 17.58 19.53 21.97
18 No Standards ● 18.85 19.78 21.97 24.71
20 ● ● 20.94 21.98 24.41 27.46
25 ● ● 26.18 27.47 30.51 Without Interference
30 ● ● 31.41 32.97 36.62 Without Interference
40 ● ● 100 41.88 43.96 Without Interference Without Interference
45 No Standards ● 47.12 49.45 Without Interference Without Interference
50 No Standards ● 52.35 54.95 Without Interference Without Interference
4 12 - 6 ● ● 6 3.8 50 10° 12.57 13.19 14.65 16.48 1
16 ● ● 16.75 17.58 19.53 Without Interference
20 ● ● 70 20.94 21.98 24.41 Without Interference
25 No Standards ● 26.18 27.47 Without Interference Without Interference
30 ● ● 31.41 32.97 Without Interference Without Interference
35 No Standards ● 100 36.65 38.46 Without Interference Without Interference
40 ● ● 41.88 43.96 Without Interference Without Interference
45 No Standards ● 47.12 49.45 Without Interference Without Interference
50 No Standards ● 52.35 54.95 Without Interference Without Interference
5 16 - 6 ● ● 7.5 4.8 70 10° 16.75 17.58 Without Interference Without Interference 1
20 No Standards ● 20.94 21.98 Without Interference Without Interference
25 ● ● 26.18 27.47 Without Interference Without Interference
30 No Standards ● 31.41 Without Interference Without Interference Without Interference
35 ● ● 100 36.65 Without Interference Without Interference Without Interference
40 No Standards ● 41.88 Without Interference Without Interference Without Interference
50 ● ● 52.35 Without Interference Without Interference Without Interference
6 20 - 6 ● ● 9 5.8 70 10° Without Interference Without Interference Without Interference Without Interference 2
30 ● ● Without Interference Without Interference Without Interference Without Interference
40 ● ● 100 Without Interference Without Interference Without Interference Without Interference
50 ● ● Without Interference Without Interference Without Interference Without Interference
60 ● ● Without Interference Without Interference Without Interference Without Interference

[ ! ]For shank diameter (d) specifications listed in blue, specify a outer diameter (D), shank length (ℓ1) and shank diameter (d).

Model Number
LN-TSC-PEM2S (Sharp Edge / Manufactured Product) / LN-TSC-EM2S (Standard / Manufactured Product)

Outer Diameter
D		 Length Under Neck ℓ1
1 mm Increment Designation		 Shank Diameter
d		 Standard Sharp Edge Flute Length
ℓ		 Under Neck Diameter
d1		 Overall Length
L		 Figure
1.5 8 ~ 20 4 ● ● 3 1.45 40 3
1.6 9 ~ 20 4 ● ● 3.2 1.55 40 3
1.8 9 ~ 20 4 ● ● 3.6 1.75 40 3
2 9 ~ 21 4 ● ● 4 1.95 40 3
2.5 10 ~ 22 4 ● ● 5 2.4 40 3
3 11 ~ 21 6 ● ● 6 2.9 45 3
4 13 ~ 23 6 ● ● 8 3.8 45 3
5 15 ~ 25 6 ● ● 10 4.8 45 3

[ ! ]When ordering manufactured products, be sure to confirm the ordering examples as the model numbers differ as below when ordering a stocked product.
(1) "LN-" is prepended to the start of the model number. (2) "S" is appended to the end of the model number

Plus d'informations


● The ideal under-neck length can be selected for workpiece machining in deep areas.
● It has a TS film coating with much greater oxidation resistance and hardness than conventional films, yielding a longer operational life and is ideal for high speed machining / dry machining.


TSC series carbide long neck square end mill, 2-flute / long neck model:Related Image

Informations de base

Work Material General Steel / Heat-Treated Steel / Acier inoxydable / Fonte / Aluminum Alloy / Copper Alloy Number of Flutes(sheet) 2 Model Long Neck Square
Coating For High Hardness (Silicone-Based) Tolerance of OD(mm) 0 ~ -0.02

Vous vous trouvez sur la page de TSC series carbide long neck square end mill, 2-flute / long neck model, le numéro d'article est le suivant: TSC-EM2LB2.5-30.
Veuillez trouver plus de détails concernant les particularités et les dimensions sous le numéro d'article TSC-EM2LB2.5-30.

Configurer

Réinitialiser

1Numéro de référence applicable suggérée

Afficher les numéros de référence

Certaines spécifications ne sont pas encore précisées.
Le numéro de référence est identifié.

Propriétés de base

  • Processing Applications

    • Flat Surface
    • Side Surface
    • Rainure
    • Inclined Cutting
    • Countersunk

    Réinitialiser

  • Type

    • LN-TSC-EM2S
    • LN-TSC-PEM2S
    • TSC-EM2LB
    • TSC-PEM2LB

    Réinitialiser

  • Outer Diameter (D)(φ)

    • 0.1
    • 0.2
    • 0.3
    • 0.4
    • 0.5
    • 0.6
    • 0.7
    • 0.8
    • 0.9
    • 1
    • 1.2
    • 1.4
    • 1.5
    • 1.6
    • 1.8
    • 2
    • 2.5
    • 3
    • 4
    • 5
    • 6

    Réinitialiser

  • Flute Length (ℓ)(mm)

    • 0.2
    • 0.3
    • 0.45
    • 0.6
    • 0.7
    • 0.9
    • 1.05
    • 1.2
    • 1.35
    • 1.5
    • 1.8
    • 2.1
    • 2.3
    • 2.4
    • 2.7
    • 3
    • 3.2
    • 3.6
    • 3.8
    • 4
    • 4.5
    • 5
    • 6
    • 7.5
    • 8
    • 9
    • 10

    Réinitialiser

  • Shank Diameter (d)(mm)

    • 4
    • 6

    Réinitialiser

  • Overall Length (L)(mm)

    • 40
    • 45
    • 50
    • 70
    • 100

    Réinitialiser

  • Length Under Neck (ℓ1)(mm)

    • 0.3
    • 0.5
    • 1
    • 1.5
    • 2
    • 2.5
    • 3
    • 4
    • 5
    • 6
    • 7
    • 8
    • 9
    • 10
    • 12
    • 14
    • 15
    • 16
    • 18
    • 20
    • 22
    • 24
    • 25
    • 26
    • 30
    • 35
    • 40
    • 45
    • 50
    • 60

     

    Réinitialiser

  • Geometry

    • Sharp Corner
    • Avec engagement

    Réinitialiser

  • Torsion Angle (θ)

    • Standard Helix (30 to 40°)
    • Powerful Helix (45° to 60°)

    Réinitialiser

  • Additional Classification

    • Manufactured Product
    • Stocked Product

    Réinitialiser

Filtrer par jours d'expédition standard

Propriétés optionnelles

Variantes de ce produit

Référence pièce
TSC-EM2LB0.3-2
TSC-EM2LB0.3-3
TSC-EM2LB0.3-4
TSC-EM2LB2.5-8
TSC-EM2LB3-12
TSC-EM2LB3-16
Référence piècePrix unitaire standardQuantité minimale de commandeRemise sur volumeJour
d'expédition standard
?		Outer Diameter (D)
(φ) 		Flute Length (ℓ)
(mm) 		Shank Diameter (d)
(mm) 		Overall Length (L)
(mm) 		Length Under Neck (ℓ1)
(mm) 		Processing Applications Geometry Torsion Angle (θ) Additional Classification Figure ● Inventory Product □ Manufacturer Product Under Neck Diameter d1
(mm) 		Actual Effective Length Depends on Work Inclination Angle 30'
(mm) 		Actual Effective Length Depends on Work Inclination Angle 1°
(mm) 		Actual Effective Length Depends on Work Inclination Angle 2°
(mm) 		Actual Effective Length Depends on Work Inclination Angle 3°
(mm) 		Length Under Neck (θ)

34.46 €

1 Disponible 5 jours 0.30.454502Inclined Cutting / Rainure / Flat Surface / Side SurfaceAvec engagementStandard Helix (30 to 40°)Stocked Product1●0.282.092.22.442.7510°

37.44 €

1 Disponible 5 jours 0.30.454503Inclined Cutting / Rainure / Flat Surface / Side SurfaceAvec engagementStandard Helix (30 to 40°)Stocked Product1●0.283.143.33.664.1210°

50.46 €

1 Disponible 5 jours 0.30.454504Inclined Cutting / Rainure / Flat Surface / Side SurfaceAvec engagementStandard Helix (30 to 40°)Stocked Product1●0.284.194.44.885.4910°

23.03 €

1 Disponible 5 jours 2.53.84508Inclined Cutting / Rainure / Flat Surface / Side SurfaceAvec engagementStandard Helix (30 to 40°)Stocked Product1●2.48.388.799.7610.9810°

26.60 €

1 Disponible 5 jours 34.565012Inclined Cutting / Rainure / Flat Surface / Side SurfaceAvec engagementStandard Helix (30 to 40°)Stocked Product1●2.912.5713.1914.6516.4810°

26.81 €

1 Disponible 5 jours 34.567016Inclined Cutting / Rainure / Flat Surface / Side SurfaceAvec engagementStandard Helix (30 to 40°)Stocked Product1●2.916.7517.5819.5321.9710°

Assistance technique

Question technique

Mode de paiement

  • Facture
  • Prépaiement
  • PayPal

Fabrication à la demande

Changer de vue

Certificats

  • ISO-9001
  • ISO-14001
  • AEO Certification
  • RoHS
  • REACH

MISUMI dans le monde

Social Media

Informations légales

Copyright © MISUMI Corporation All Rights Reserved.