TSC series carbide long neck square end mill, 3-flute, 45° spiral / long neck model (TSC-HEM3LB1-20)
- Remise sur volume
Détails du produit:
Référence fabricant: TSC-HEM3LB1-20
Marque: MISUMI
Prix: 34.30 €
Délai de livraison: 5 jours
Données techniques:
Outer Diameter (D): 1 φ
Flute Length (ℓ): 1.5 mm
Shank Diameter (d): 4 mm
Overall Length (L): 70 mm
Length Under Neck (ℓ1): 20 mm
- TS
- General Steel
- 3 Flutes
Référence pièce
Vous pouvez trouver ici le numéro
de référence lié au produit recherché.
TSC-HEM3LB1-20
Référence pièce
|
|---|
| TSC-HEM3LB1-20 |
| Référence pièce |
Prix unitaire standard
| Quantité minimale de commande | Remise sur volume | Outer Diameter (D) (φ) | Flute Length (ℓ) (mm) | Shank Diameter (d) (mm) | Overall Length (L) (mm) | Length Under Neck (ℓ1) (mm) | Processing Applications | Additional Classification | Figure | ● Inventory Product □ Manufacturer Product | Under Neck Diameter d1 (mm) | Actual Effective Length Depends on Work Inclination Angle 30' (mm) | Actual Effective Length Depends on Work Inclination Angle 1° (mm) | Actual Effective Length Depends on Work Inclination Angle 2° (mm) | Actual Effective Length Depends on Work Inclination Angle 3° (mm) | |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
34.30 € | 1 | Disponible | 5 jours | 1 | 1.5 | 4 | 70 | 20 | Flat Surface / Side Surface / Rainure / Inclined Cutting | Stocked Product | 1 | ● | 0.95 | 20.94 | 21.98 | 24.41 | 27.46 |
Loading...
Spécifications
Model Number
TSC-HEM3LB (Stocked Product)
| Outer Diameter D |
Length Under Neck ℓ1 |
Flute Length ℓ |
Under Neck Diameter d1 |
Overall Length L |
Shank Diameter d |
Actual Effective Length Depends on Work Inclination Angle | Figure | |||
| 30' | 1° | 2° | 3° | |||||||
| 1 | 4 | 1.5 | 0.95 | 50 | 4 | 4.19 | 4.40 | 4.88 | 5.49 | 1 |
| 6 | 6.28 | 6.59 | 7.32 | 8.24 | ||||||
| 8 | 8.38 | 8.79 | 9.76 | 10.98 | ||||||
| 10 | 10.47 | 10.99 | 12.21 | 13.73 | ||||||
| 12 | 12.57 | 13.19 | 14.65 | 16.48 | ||||||
| 16 | 16.75 | 17.58 | 19.53 | 21.97 | ||||||
| 20 | 70 | 20.94 | 21.98 | 24.41 | 27.46 | |||||
| 25 | 26.18 | 27.47 | 30.51 | Without Interference | ||||||
| 1.2 | 6 | 1.8 | 1.15 | 50 | 4 | 6.28 | 6.59 | 7.32 | 8.24 | 1 |
| 8 | 8.38 | 8.79 | 9.76 | 10.98 | ||||||
| 10 | 10.47 | 10.99 | 12.21 | 13.73 | ||||||
| 12 | 12.57 | 13.19 | 14.65 | 16.48 | ||||||
| 16 | 16.75 | 17.58 | 19.53 | 21.97 | ||||||
| 1.5 | 6 | 2.3 | 1.45 | 50 | 4 | 6.28 | 6.59 | 7.32 | 8.24 | 1 |
| 8 | 8.38 | 8.79 | 9.76 | 10.98 | ||||||
| 10 | 10.47 | 10.99 | 12.21 | 13.73 | ||||||
| 12 | 12.57 | 13.19 | 14.65 | 16.48 | ||||||
| 16 | 16.75 | 17.58 | 19.53 | 21.97 | ||||||
| 20 | 70 | 20.94 | 21.98 | 24.41 | Without Interference | |||||
| 2 | 8 | 3 | 1.95 | 50 | 4 | 8.38 | 8.79 | 9.76 | 10.98 | 1 |
| 10 | 10.47 | 10.99 | 12.21 | 13.73 | ||||||
| 12 | 12.57 | 13.19 | 14.65 | 16.48 | ||||||
| 14 | 14.66 | 15.39 | 17.09 | 19.22 | ||||||
| 16 | 16.75 | 17.58 | 19.53 | Without Interference | ||||||
Model Number
TSC-HEM3LB (Stocked Product)
| Outer Diameter D |
Length Under Neck ℓ1 |
Flute Length ℓ |
Under Neck Diameter d1 |
Overall Length L |
Shank Diameter d |
Actual Effective Length Depends on Work Inclination Angle | Figure | |||
| 30' | 1° | 2° | 3° | |||||||
| 2 | 18 | 3 | 1.95 | 70 | 4 | 18.85 | 19.78 | 21.97 | Without Interference | 1 |
| 20 | 20.94 | 21.98 | 24.41 | Without Interference | ||||||
| 25 | 26.18 | 27.47 | Without Interference | Without Interference | ||||||
| 30 | 31.41 | 32.97 | Without Interference | Without Interference | ||||||
| 2.5 | 8 | 3.75 | 2.4 | 50 | 4 | 8.38 | 8.79 | 9.76 | 10.98 | 1 |
| 12 | 12.57 | 13.19 | 14.65 | Without Interference | ||||||
| 16 | 16.75 | 17.58 | 19.53 | Without Interference | ||||||
| 20 | 70 | 20.94 | 21.98 | Without Interference | Without Interference | |||||
| 25 | 26.18 | 27.47 | Without Interference | Without Interference | ||||||
| 30 | 31.41 | 32.97 | Without Interference | Without Interference | ||||||
| 3 | 8 | 4.5 | 2.9 | 70 | 6 | 8.38 | 8.79 | 9.76 | 10.98 | 1 |
| 12 | 12.57 | 13.19 | 14.65 | 16.48 | ||||||
| 16 | 16.75 | 17.58 | 19.53 | 21.97 | ||||||
| 20 | 20.94 | 21.98 | 24.41 | 27.46 | ||||||
| 25 | 26.18 | 27.47 | 30.51 | Without Interference | ||||||
| 30 | 31.41 | 32.97 | 36.62 | Without Interference | ||||||
| 40 | 100 | 41.88 | 43.96 | Without Interference | Without Interference | |||||
| 4 | 16 | 6 | 3.8 | 50 | 6 | 16.75 | 17.58 | 19.53 | Without Interference | 1 |
| 20 | 70 | 20.94 | 21.98 | 24.41 | Without Interference | |||||
| 30 | 31.41 | 32.97 | Without Interference | Without Interference | ||||||
| 40 | 100 | 41.88 | 43.96 | Without Interference | Without Interference | |||||
| 5 | 16 | 7.5 | 4.8 | 70 | 6 | 16.75 | 17.58 | Without Interference | Without Interference | 1 |
| 25 | 26.18 | 27.47 | Without Interference | Without Interference | ||||||
| 35 | 100 | 36.65 | Without Interference | Without Interference | Without Interference | |||||
| 50 | 52.35 | Without Interference | Without Interference | Without Interference | ||||||
| 6 | 20 | 9 | 5.8 | 70 | 6 | Without Interference | Without Interference | Without Interference | Without Interference | 2 |
| 30 | Without Interference | Without Interference | Without Interference | Without Interference | ||||||
| 40 | 100 | Without Interference | Without Interference | Without Interference | Without Interference | |||||
| 50 | Without Interference | Without Interference | Without Interference | Without Interference | ||||||
| 60 | Without Interference | Without Interference | Without Interference | Without Interference | ||||||
For Cutting Conditions, Refer to >>Click here.
Model Number
LN-TSC-HEM3S (Manufactured Product)
| Outer Diameter D |
Length Under Neck ℓ1 1 mm Increment Designation |
Flute Length ℓ |
Under Neck Diameter d1 |
Overall Length L |
Shank Diameter d |
Figure |
| 1.5 | 10 ~ 33 | 4.5 | 1.45 | 60 | 6 | 3 |
| 2 | 11 ~ 34 | 6 | 1.95 | 60 | 6 | 3 |
| 2.5 | 13 ~ 35 | 7.5 | 2.4 | 60 | 6 | 3 |
| 3 | 13 ~ 36 | 8 | 2.9 | 50 | 6 | 3 |
| 4 | 16 ~ 38 | 11 | 3.8 | 60 | 6 | 3 |
| 5 | 18 ~ 40 | 13 | 4.8 | 60 | 6 | 3 |
[ ! ]When ordering manufactured products, be sure to confirm the ordering examples as the model numbers differ as below when ordering a stocked product.
(1) "LN-" is prepended to the start of the model number. (2) "S" is appended to the end of the model number
For Cutting Conditions, Refer to >>Click here.
Plus d'informations
● It has a TS film coating with much greater oxidation resistance and hardness than conventional films, resulting in a longer operational life and ideal for high speed machining / dry machining.
● Delivers a finish with very good surface roughness after machining. 
Informations de base
| Work Material | General Steel / Heat-Treated Steel / High-Hardness Steel ~ HRC55 / Acier inoxydable / Fonte / Aluminum Alloy / Copper Alloy | Number of Flutes(sheet) | 3 | Model | Long Neck Square |
|---|---|---|---|---|---|
| Coating | For High Hardness (Silicone-Based) | Geometry | Avec engagement | Torsion Angle (θ) | Powerful Helix (45° to 60°) |
| Tolerance of OD(mm) | 0 ~ -0.02 |
Vous vous trouvez sur la page de TSC series carbide long neck square end mill, 3-flute, 45° spiral / long neck model, le numéro d'article est le suivant: TSC-HEM3LB1-20.
Veuillez trouver plus de détails concernant les particularités et les dimensions sous le numéro d'article TSC-HEM3LB1-20.
Configurer
Propriétés de base
-
Processing Applications
- Flat Surface
- Side Surface
- Rainure
- Thrust (Z-Feed)
- Inclined Cutting
- Countersunk
-
Type
- LN-TSC-HEM3S
- TSC-HEM3LB
-
Outer Diameter (D)(φ)
-
Flute Length (ℓ)(mm)
-
Shank Diameter (d)(mm)
-
Overall Length (L)(mm)
-
Length Under Neck (ℓ1)(mm)
-
Additional Classification
- Manufactured Product
- Stocked Product
Filtrer par jours d'expédition standard
-
- Tous les articles
- 5 jours ou moins
- 8 jours ou moins
Propriétés optionnelles
- Les spécifications et les dimensions de certaines pièces peuvent ne pas être intégralement indiquées. Pour plus de détails, reportez-vous aux catalogues des fabricants .
Variantes de ce produit
| Référence pièce |
|---|
| TSC-HEM3LB1-10 |
| TSC-HEM3LB1-12 |
| TSC-HEM3LB1-16 |
| TSC-HEM3LB1-25 |
| TSC-HEM3LB1-4 |
| TSC-HEM3LB1-6 |
| Référence pièce | Prix unitaire standard | Quantité minimale de commande | Remise sur volume | Jour d'expédition standard ? | Outer Diameter (D) (φ) | Flute Length (ℓ) (mm) | Shank Diameter (d) (mm) | Overall Length (L) (mm) | Length Under Neck (ℓ1) (mm) | Processing Applications | Additional Classification | Figure | ● Inventory Product □ Manufacturer Product | Under Neck Diameter d1 (mm) | Actual Effective Length Depends on Work Inclination Angle 30' (mm) | Actual Effective Length Depends on Work Inclination Angle 1° (mm) | Actual Effective Length Depends on Work Inclination Angle 2° (mm) | Actual Effective Length Depends on Work Inclination Angle 3° (mm) |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
30.46 € | 1 | Disponible | 5 jours | 1 | 1.5 | 4 | 50 | 10 | Inclined Cutting / Rainure / Flat Surface / Side Surface | Stocked Product | 1 | ● | 0.95 | 10.47 | 10.99 | 12.21 | 13.73 | |
29.70 € | 1 | Disponible | 5 jours | 1 | 1.5 | 4 | 50 | 12 | Inclined Cutting / Rainure / Flat Surface / Side Surface | Stocked Product | 1 | ● | 0.95 | 12.57 | 13.19 | 14.65 | 16.48 | |
38.96 € | 1 | Disponible | 5 jours | 1 | 1.5 | 4 | 50 | 16 | Inclined Cutting / Rainure / Flat Surface / Side Surface | Stocked Product | 1 | ● | 0.95 | 16.75 | 17.58 | 19.53 | 21.97 | |
41.06 € | 1 | Disponible | 5 jours | 1 | 1.5 | 4 | 70 | 25 | Inclined Cutting / Rainure / Flat Surface / Side Surface | Stocked Product | 1 | ● | 0.95 | 26.18 | 27.47 | 30.51 | Without Interference | |
29.45 € | 1 | Disponible | 5 jours | 1 | 1.5 | 4 | 50 | 4 | Inclined Cutting / Rainure / Flat Surface / Side Surface | Stocked Product | 1 | ● | 0.95 | 4.19 | 4.4 | 4.88 | 5.49 | |
28.04 € | 1 | Disponible | 5 jours | 1 | 1.5 | 4 | 50 | 6 | Inclined Cutting / Rainure / Flat Surface / Side Surface | Stocked Product | 1 | ● | 0.95 | 6.28 | 6.59 | 7.32 | 8.24 |
Assistance technique
Mode de paiement
Fabrication à la demande
Certificats
Copyright © MISUMI Corporation All Rights Reserved.