TSC series carbide high-helical end mill (cutting edge deflection accuracy of 5 μm or less)
- Remise sur volume
- TS
- General Steel
- Multi-Flutes （5 ~）
- R (Regular)
Référence pièce
Vous pouvez trouver ici le numéro
de référence lié au produit recherché.
Référence pièce
|
|---|
| TSC-HP-PSXR3 |
| TSC-HP-PSXR4 |
| TSC-HP-PSXR5 |
| TSC-HP-PSXR6 |
| TSC-HP-PSXR8 |
| TSC-HP-PSXR10 |
| TSC-HP-PSXR12 |
| Référence pièce |
Prix unitaire standard
| Quantité minimale de commande | Remise sur volume | Outer Diameter (D) (φ) | Flute Length (ℓ) (mm) | Number of Flutes (sheet) | Shank Diameter (d) (mm) | Overall Length (L) (mm) | Tolerance of OD (mm) | Figure | |
|---|---|---|---|---|---|---|---|---|---|---|---|
94.04 € | 1 | Disponible | 5 jours | 3 | 10 | 4 | 6 | 60 | -0.01 ~ -0.035 | 1 | |
94.04 € | 1 | Disponible | 5 jours | 4 | 12 | 4 | 6 | 60 | -0.01 ~ -0.035 | 1 | |
106.68 € | 1 | Disponible | 5 jours | 5 | 15 | 4 | 6 | 60 | -0.01 ~ -0.035 | 1 | |
109.59 € | 1 | Disponible | 5 jours | 6 | 15 | 6 | 6 | 60 | -0.01 ~ -0.035 | 2 | |
128.68 € | 1 | Disponible | 5 jours | 8 | 20 | 6 | 8 | 75 | -0.01 ~ -0.035 | 2 | |
149.07 € | 1 | Disponible | 5 jours | 10 | 25 | 6 | 10 | 80 | -0.01 ~ -0.035 | 2 | |
96.94 € | 1 | Disponible | 5 jours | 12 | 30 | 6 | 12 | 100 | -0.01 ~ -0.045 | 2 |
Loading...
Spécifications
| Model Number | Flute Length ℓ |
Overall Length L |
Shank Diameter d |
Number of Flutes | Figure | |
| Outer Diameter D |
||||||
| TSC-HP-PSXR | 3 | 10 | 60 | 6 | 4 | 1 |
| 4 | 12 | 60 | 6 | 4 | 1 | |
| 5 | 15 | 60 | 6 | 4 | 1 | |
| 6 | 15 | 60 | 6 | 6 | 2 | |
| 8 | 20 | 75 | 8 | 6 | 2 | |
| 10 | 25 | 80 | 10 | 6 | 2 | |
| 12 | 30 | 100 | 12 | 6 | 2 |
For Cutting Conditions, Refer to >>Click here.
Plus d'informations
● Blade runout accuracy within 5 μm (our measured ratio) / back taper within 5 μm / shank diameter, tolerance h5 standard, has been adopted for a high quality tool with minimal quality variation. It is ideal for side-finishing machining requiring a high accuracy level.
● Designed to have a blade shape with an emphasis on sharpness thanks to the positive blade / sharp edge tip, it is suitable for machining raw materials of carbon steel, etc.
● The TS coating consisting of a nitride-based composite film with a fully crystalline structure means that it delivers excellent durability when used in carbon steel raw materials, in addition to heat treated steel.
[ ! ] As this is a highly accurate product, if Misumi Q-Value re-grinding is not conducted, then the level of precision may not be reproducible.
Informations de base
| Work Material | General Steel / Heat-Treated Steel / High-Hardness Steel ~ HRC55 / Acier inoxydable / Fonte / Aluminum Alloy / Copper Alloy | Model | Highly-Helical | Coating | For High Hardness (Silicone-Based) |
|---|---|---|---|---|---|
| Processing Applications | Flat Surface / Side Surface / Inclined Cutting | Geometry | Sharp Corner | Torsion Angle (θ) | Powerful Helix (45° to 60°) |
| Additional Classification | Stocked Product | ● Inventory Product □ Manufacturer Product | ● |
Configurer
Propriétés de base
-
Outer Diameter (D)(φ)
-
Flute Length (ℓ)(mm)
-
Number of Flutes(sheet)
-
Shank Diameter (d)(mm)
-
Overall Length (L)(mm)
-
Type
- TSC-HP-PSXR
Filtrer par jours d'expédition standard
-
- Tous les articles
- 5 jours ou moins
Propriétés optionnelles
- Les spécifications et les dimensions de certaines pièces peuvent ne pas être intégralement indiquées. Pour plus de détails, reportez-vous aux catalogues des fabricants .
Assistance technique
Mode de paiement
Fabrication à la demande
Certificats
Copyright © MISUMI Corporation All Rights Reserved.