TSC series carbide ball end mill (R accuracy ±3μm)
- Remise sur volume
- TS
- General Steel
- 2 Flutes
- S (Short)
Référence pièce
Vous pouvez trouver ici le numéro
de référence lié au produit recherché.
Référence pièce
|
|---|
| TSC-HP-BEM2S1.5 |
| TSC-HP-BEM2S2 |
| TSC-HP-BEM2S2.5 |
| TSC-HP-BEM2S3 |
| Référence pièce |
Prix unitaire standard
| Quantité minimale de commande | Remise sur volume | R Size (mm) | Flute Length (ℓ) (mm) | Overall Length (L) (mm) | R Precision (μm) | Outer Diameter D (mm) | Figure | Length Under Neck (θ) (Degree) | |
|---|---|---|---|---|---|---|---|---|---|---|---|
46.74 € | 1 | Disponible | 5 jours | 1.5 | 4.5 | 60 | ±0.003 | 3 | 1 | 10° | |
58.04 € | 1 | Disponible | 5 jours | 2 | 6 | 70 | ±0.003 | 4 | 1 | 10° | |
96.37 € | 1 | Disponible | 5 jours | 2.5 | 7.5 | 80 | ±0.003 | 5 | 1 | 10° | |
63.40 € | 1 | Disponible | 5 jours | 3 | 9 | 90 | -0.005 ~ +0.001 | 6 | 2 | - |
Loading...
Spécifications
| Flute Length ℓ |
Outer Diameter D |
Overall Length L |
Shank Diameter d |
Figure | |
| Tip R |
|||||
| 0.2 | 0.6 | 0.4 | 50 | 6 | 1 |
| 0.3 | 0.9 | 0.6 | 50 | 6 | 1 |
| 0.5 | 1.5 | 1 | 50 | 6 | 1 |
| 1 | 3 | 2 | 50 | 6 | 1 |
| 1.5 | 4.5 | 3 | 60 | 6 | 1 |
| 2 | 6 | 4 | 70 | 6 | 1 |
| 2.5 | 7.5 | 5 | 80 | 6 | 1 |
| 3 | 9 | 6 | 90 | 6 | 2 |
For Cutting Conditions, Refer to >>Click here.
Plus d'informations
● The R tolerance range within 6 μm (our measured ratio) / shank diameter, tolerance h5 standard, has been adopted. The high-quality tools with a minimal quality variation are suitable for high-precision 3-dimensional mold machining.
● The seamless shape (blade mounted in one step from the peripheral blade through to the rounded center) yields a flat and smooth blade runout surface.
● The TS coating consisting of a nitride-based composite film with a fully crystalline structure means that it realizes a high oxidation resistance temperature and high hardness.
[ ! ] As this is a highly accurate product, if Misumi Q-Value re-grinding is not conducted, then the level of precision may not be reproducible.
Informations de base
| Model | Bore | Work Material | General Steel / Heat-Treated Steel / High-Hardness Steel ~ HRC55 / Acier inoxydable / Fonte / Aluminium / Cuivre | Number of Flutes(sheet) | 2 |
|---|---|---|---|---|---|
| Coating | For High Hardness (Silicone-Based) | Shank Diameter (d)(mm) | 6 | Processing Applications | Curved Surface / Side Surface / Carving / R-Groove |
| Inventory Classification | Stocked Product | Torsion Availability | Included |
Configurer
Propriétés de base
-
R Size(mm)
-
Flute Length (ℓ)(mm)
-
Overall Length (L)(mm)
-
R Precision(μm)
-
Type
- TSC-HP-BEM2S
Filtrer par jours d'expédition standard
-
- Tous les articles
- 5 jours ou moins
Propriétés optionnelles
- Les spécifications et les dimensions de certaines pièces peuvent ne pas être intégralement indiquées. Pour plus de détails, reportez-vous aux catalogues des fabricants .
Assistance technique
Mode de paiement
Fabrication à la demande
Certificats
Copyright © MISUMI Corporation All Rights Reserved.