TSC series carbide ball end mill, regular model (Numéros de référence)
- Remise sur volume
- TS
- General Steel
- 2 Flutes
- R (Regular)
Référence pièce
Vous pouvez trouver ici le numéro
de référence lié au produit recherché.
Référence pièce
|
|---|
| SN-TSC-BEM2R8-[40-80/1]-30 |
| SNR-TSC-BEM2R8-[35-80/1]-[5-30/1] |
| TSC-BEM2R8 |
| Référence pièce |
Prix unitaire standard
| Quantité minimale de commande | Remise sur volume | R Size (mm) | Flute Length (ℓ) (mm) | Overall Length (L) (mm) | Length Under Neck (ℓ1) (mm) | Shank Diameter (d) (mm) | R Precision (μm) | Inventory Classification | Outer Diameter D (mm) | Figure | Length Under Neck (θ) (Degree) | |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
- | 1 | 8 jours | 8 | 30 | 140 | 40 ～ 80 | 16 | ±0.01 | Standard Neck Relief | 16 | 2 | - | ||
- | 1 | 7 jours | 8 | 5 ～ 30 | 140 | 35 ～ 80 | 16 | ±0.01 | Cutting Edge R Processing | 16 | 2 | - | ||
202.48 € | 1 | Disponible | 5 jours | 8 | 30 | 140 | - | 16 | ±0.01 | Stocked Product | 16 | 2 | - |
Loading...
Spécifications
| Model Number | Shank Diameter d |
Flute Length ℓ |
Outer Diameter D |
Overall Length L |
Figure | ||
| Tip R |
Shank Diameter d |
||||||
| TSC-BEM2R | 0.2 | - | 4 | 1.5 | 0.4 | 50 | 1 |
| 0.3 | - | 4 | 1.8 | 0.6 | 50 | 1 | |
| 0.4 | - | 4 | 2.4 | 0.8 | 50 | 1 | |
| 0.5 | - | 4 | 3 | 1 | 50 | 1 | |
| 0.5 | 6 | 6 | 3 | 1 | 50 | 1 | |
| 0.6 | - | 4 | 3.6 | 1.2 | 50 | 1 | |
| 0.75 | - | 4 | 4.5 | 1.5 | 50 | 1 | |
| 1 | - | 4 | 6 | 2 | 50 | 1 | |
| 1 | 6 | 6 | 6 | 2 | 50 | 1 | |
| 1.25 | - | 4 | 6 | 2.5 | 50 | 1 | |
| 1.5 | - | 4 | 8 | 3 | 60 | 1 | |
| 1.5 | 6 | 6 | 8 | 3 | 60 | 1 | |
| 2 | - | 6 | 8 | 4 | 70 | 1 | |
| 2.5 | - | 6 | 12 | 5 | 80 | 1 | |
| 3 | - | 6 | 12 | 6 | 90 | 2 | |
| 4 | - | 8 | 15 | 8 | 100 | 2 | |
| 5 | - | 10 | 18 | 10 | 100 | 2 | |
| 6 | - | 12 | 22 | 12 | 110 | 2 | |
| 8 | - | 16 | 30 | 16 | 140 | 2 |
[ ! ] For shank diameter (d) specifications listed in blue, specify both a tip (R) and shank diameter (d).
For Cutting Conditions, Refer to >>Click here.
Plus d'informations
● Capable of being re-sharpened many more times than regular blade lengths.
● It has a TS film coating with much greater oxidation resistance and hardness than conventional films, yielding a longer operational life and is ideal for high speed machining / dry machining.
[ ! ]The following additional processing services are available for the products on this page.
Informations de base
| Model | Bore | Work Material | General Steel / Heat-Treated Steel / High-Hardness Steel ~ HRC55 / Acier inoxydable / Fonte / Aluminium / Cuivre | Number of Flutes(sheet) | 2 |
|---|---|---|---|---|---|
| Coating | For High Hardness (Silicone-Based) | Processing Applications | Curved Surface / Side Surface / Carving / R-Groove | Torsion Availability | Included |
Configurer
Propriétés de base
-
R Size(mm)
-
Flute Length (ℓ)(mm)
-
Overall Length (L)(mm)
-
Length Under Neck (ℓ1)(mm)
-
Shank Diameter (d)(mm)
-
Inventory Classification
- Cutting Edge R Processing
- Standard Neck Relief
- Stocked Product
-
Type
- SN-TSC-BEM2R
- SNR-TSC-BEM2R
- TSC-BEM2R
-
R Precision(μm)
Filtrer par jours d'expédition standard
-
- Tous les articles
- 5 jours ou moins
- 7 jours ou moins
- 8 jours ou moins
Propriétés optionnelles
- Les spécifications et les dimensions de certaines pièces peuvent ne pas être intégralement indiquées. Pour plus de détails, reportez-vous aux catalogues des fabricants .
Assistance technique
Mode de paiement
Fabrication à la demande
Certificats
Copyright © MISUMI Corporation All Rights Reserved.