TSC series carbide ball end mill, 2-flute / short, long shank model
- Remise sur volume
- TS
- General Steel
- 2 Flutes
- S (Short)
Référence pièce
Vous pouvez trouver ici le numéro
de référence lié au produit recherché.
| Référence pièce |
Prix unitaire standard
| Quantité minimale de commande | Remise sur volume | R Size (mm) | Flute Length (ℓ) (mm) | Overall Length (L) (mm) | Length Under Neck (ℓ1) (mm) | Shank Diameter (d) (mm) | R Precision (μm) | Inventory Classification | Outer Diameter D (mm) | Figure | Length Under Neck (θ) (Degree) | |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
- | 1 | 8 jours | 3 | 10 | 140 | 15 ～ 60 | 6 | -0.007 ~ +0.003 | Standard Neck Relief | 6 | 2 | - | ||
- | 1 | 8 jours | 4 | 13 | 160 | 18 ～ 63 | 8 | -0.007 ~ +0.003 | Standard Neck Relief | 8 | 2 | - | ||
- | 1 | 8 jours | 5 | 15 | 180 | 20 ～ 65 | 10 | -0.007 ~ +0.003 | Standard Neck Relief | 10 | 2 | - | ||
- | 1 | 8 jours | 6 | 15 | 200 | 20 ～ 65 | 12 | -0.007 ~ +0.003 | Standard Neck Relief | 12 | 2 | - | ||
- | 1 | 7 jours | 3 | 5 ～ 10 | 140 | 15 ～ 60 | 6 | -0.007 ~ +0.003 | Cutting Edge R Processing | 6 | 2 | - | ||
- | 1 | 7 jours | 4 | 5 ～ 13 | 160 | 18 ～ 63 | 8 | -0.007 ~ +0.003 | Cutting Edge R Processing | 8 | 2 | - | ||
- | 1 | 7 jours | 5 | 5 ～ 15 | 180 | 20 ～ 65 | 10 | -0.007 ~ +0.003 | Cutting Edge R Processing | 10 | 2 | - | ||
- | 1 | 7 jours | 6 | 5 ～ 15 | 200 | 20 ～ 65 | 12 | -0.007 ~ +0.003 | Cutting Edge R Processing | 12 | 2 | - | ||
91.68 € | 1 | Disponible | 5 jours | 3 | 10 | 140 | - | 6 | -0.007 ~ +0.003 | Stocked Product | 6 | 2 | - | |
132.10 € | 1 | Disponible | 5 jours | 4 | 13 | 160 | - | 8 | -0.007 ~ +0.003 | Stocked Product | 8 | 2 | - | |
115.88 € | 1 | Disponible | 5 jours | 5 | 15 | 180 | - | 10 | -0.007 ~ +0.003 | Stocked Product | 10 | 2 | - | |
143.49 € | 1 | Disponible | 5 jours | 6 | 15 | 200 | - | 12 | -0.007 ~ +0.003 | Stocked Product | 12 | 2 | - |
Loading...
Spécifications
| Model Number | Flute Length ℓ |
Outer Diameter D |
Overall Length L |
Shank Diameter d |
Figure | |
| Tip R |
||||||
| TSC-LS-BEM2S | 0.5 | 2 | 1 | 70 | 3 | 1 |
| 1 | 3 | 2 | 70 | 3 | 1 | |
| 1.5 | 4 | 3 | 80 | 3 | 2 | |
| 2 | 6 | 4 | 100 | 4 | 2 | |
| 2.5 | 8 | 5 | 100 | 6 | 1 | |
| 3 | 10 | 6 | 140 | 6 | 2 | |
| 4 | 13 | 8 | 160 | 8 | 2 | |
| 5 | 15 | 10 | 180 | 10 | 2 | |
| 6 | 15 | 12 | 200 | 12 | 2 | |
| 8 | 20 | 16 | 220 | 16 | 2 | |
| 10 | 25 | 20 | 250 | 20 | 2 | |
| 12.5 | 30 | 25 | 280 | 25 | 2 |
For Cutting Conditions, Refer to >>Click here.
Plus d'informations
● It has a TS film coating with much greater oxidation resistance and hardness than conventional films, resulting in a longer operational life and ideal for high speed machining / dry machining.
● The long shank model is ideal for machining deep grooves.
[ ! ]The following additional processing services are available for the products on this page.
Informations de base
| Model | Bore | Work Material | General Steel / Heat-Treated Steel / High-Hardness Steel ~ HRC55 / Acier inoxydable / Fonte / Aluminium / Cuivre | Number of Flutes(sheet) | 2 |
|---|---|---|---|---|---|
| Coating | For High Hardness (Silicone-Based) | Processing Applications | Curved Surface / Side Surface / Carving / R-Groove | Torsion Availability | Included |
Configurer
Propriétés de base
-
R Size(mm)
-
Flute Length (ℓ)(mm)
-
Overall Length (L)(mm)
-
Length Under Neck (ℓ1)(mm)
-
Shank Diameter (d)(mm)
-
Inventory Classification
- Cutting Edge R Processing
- Standard Neck Relief
- Stocked Product
-
Type
- SN-TSC-LS-BEM2S
- SNR-TSC-LS-BEM2S
- TSC-LS-BEM2S
-
R Precision(μm)
Filtrer par jours d'expédition standard
-
- Tous les articles
- 5 jours ou moins
- 7 jours ou moins
- 8 jours ou moins
Propriétés optionnelles
- Les spécifications et les dimensions de certaines pièces peuvent ne pas être intégralement indiquées. Pour plus de détails, reportez-vous aux catalogues des fabricants .
Assistance technique
Mode de paiement
Fabrication à la demande
Certificats
Copyright © MISUMI Corporation All Rights Reserved.