TSC series carbide radius end mill, 2-flute / short model (TSC-CR-EM2S3-R0.3)
Cliquez sur cette image pour l'agrandir.
Cliquez sur cette image pour l'agrandir.
- Remise sur volume
Détails du produit:
Référence fabricant: TSC-CR-EM2S3-R0.3
Marque: MISUMI
Prix: 38.15 €
Délai de livraison: 5 jours
Données techniques:
Outer Diameter (D): 3 φ
R Size: 0.3 mm
Flute Length (ℓ): 6 mm
Overall Length (L): 45 mm
Shank Diameter (d): 6 mm
- TS
- General Steel
- 2 Flutes
- S (Short)
Référence pièce
Vous pouvez trouver ici le numéro
de référence lié au produit recherché.
TSC-CR-EM2S3-R0.3
Référence pièce
|
|---|
| TSC-CR-EM2S3-R0.3 |
| Référence pièce |
Prix unitaire standard
| Quantité minimale de commande | Remise sur volume | Outer Diameter (D) (φ) | R Size (mm) | Flute Length (ℓ) (mm) | Overall Length (L) (mm) | Shank Diameter (d) (mm) | Length Under Neck (ℓ1) (mm) | R Precision (μm) | Additional Classification | Figure | |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
38.15 € | 1 | Disponible | 5 jours | 3 | 0.3 | 6 | 45 | 6 | - | ±0.01 | Stocked Product | 1 |
Loading...
Spécifications
Model Number
TSC-CR-EM2S
| Outer Diameter D |
Radius R | Flute Length ℓ |
Overall Length L |
Shank Diameter d |
Figure | ● Stocked Product □ Manufactured Product |
||||||||
| 1 | 0.1 | 0.2 | 0.3 | 2 | 40 | 4 | 1 | ● | ||||||
| 1.5 | 0.1 | 0.2 | 0.3 | 0.5 | 3 | 40 | 4 | 1 | ● | |||||
| 2 | 0.1 | 0.2 | 0.3 | 0.4 | 0.5 | 4 | 40 | 4 | 1 | ● | ||||
| 2.5 | 0.1 | 0.2 | 0.3 | 0.5 | 5 | 40 | 4 | 1 | ● | |||||
| 0.4 | □ | |||||||||||||
| 2.8 | 0.1 - 0.5 | 5.6 | 40 | 4 | 1 | □ | ||||||||
| 3 | 0.1 | 0.2 | 0.3 | 0.4 | 0.5 | 1 | 6 | 45 | 6 | 1 | ● | |||
| 0.6 - 0.7 | □ | |||||||||||||
| 3.5 | 0.1 - 0.7 | 7 | 45 | 6 | 1 | □ | ||||||||
| 4 | 0.2 | 0.3 | 0.4 | 0.5 | 1 | 8 | 45 | 6 | 1 | ● | ||||
| 0.1 - 0.9 | □ | |||||||||||||
| 4.5 | 0.1 - 1.2 | 9 | 45 | 6 | 1 | □ | ||||||||
| 5 | 0.1 | 0.2 | 0.3 | 0.5 | 1 | 10 | 45 | 6 | 1 | ● | ||||
| 0.4 - 1.5 | □ | |||||||||||||
| 5.5 | 0.1 ~ 1.7 | 11 | 45 | 6 | 1 | □ | ||||||||
| 6 | 0.2 | 0.3 | 0.5 | 1 | 1.5 | 2 | 12 | 45 | 6 | 2 | ● | |||
| 0.1 ~ 2.0 | □ | |||||||||||||
| 8 | 0.2 | 0.3 | 0.5 | 1 | 16 | 55 | 8 | 2 | ● | |||||
| 0.1 ~ 3.0 | □ | |||||||||||||
| 10 | 0.5 | 1 | 1.5 | 2 | 3 | 20 | 65 | 10 | 2 | ● | ||||
| 0.1 ~ 3.0 | □ | |||||||||||||
| 12 | 0.5 | 1 | 1.5 | 2 | 24 | 75 | 12 | 2 | ● | |||||
| 0.1 ~ 3.0 | □ | |||||||||||||
| 16 | 0.1 ~ 3.0 | 32 | 105 | 16 | 2 | □ | ||||||||
| 20 | 0.1 ~ 3.0 | 40 | 110 | 20 | 2 | □ | ||||||||
[ ! ]The flute length (ℓ) and total length (L) is approximately D x 0.5 shorter (up to approximately 5 mm) for manufactured products.
[ ! ]Manufactured products with a TS coating are shipped on the 10th day.
For Cutting Conditions, Refer to >>Click here.
Plus d'informations
● It has a TS film coating with much greater oxidation resistance and hardness than conventional films, resulting in a longer operational life and is ideal for high speed machining / dry machining.
● A general purpose 2-flute end mill product with added high-accuracy curvature.
● The radial blade tip is also useful to prevent chipping.
Informations de base
| Work Material | General Steel / Heat-Treated Steel / High-Hardness Steel ~ HRC55 / Acier inoxydable / Fonte / Aluminum Alloy / Copper Alloy | Number of Flutes(sheet) | 2 | Model | Radius |
|---|---|---|---|---|---|
| Processing Applications | Flat Surface / Side Surface / Curved Surface / Rainure / Inclined Cutting | Coating | For High Hardness (Silicone-Based) | Torsion Angle (θ) | Standard Helix (30 to 40°) |
Vous vous trouvez sur la page de TSC series carbide radius end mill, 2-flute / short model, le numéro d'article est le suivant: TSC-CR-EM2S3-R0.3.
Veuillez trouver plus de détails concernant les particularités et les dimensions sous le numéro d'article TSC-CR-EM2S3-R0.3.
Configurer
Propriétés de base
-
Length Under Neck (ℓ1)(mm)
-
Type
- SN-TSC-CR-EM2S
- SNR-TSC-CR-EM2S
- TSC-CR-EM2S
-
Outer Diameter (D)(φ)
-
R Size(mm)
- 0.1
- 0.2
- 0.3
- 0.4
- 0.5
- 0.6
- 0.7
- 0.8
- 0.9
- 1
- 1.1
- 1.2
- 1.3
- 1.4
- 1.5
- 1.6
- 1.7
- 1.8
- 1.9
- 2
- 2.1
- 2.2
- 2.3
- 2.4
- 2.5
- 2.6
- 2.7
- 2.8
- 2.9
- 3
-
Flute Length (ℓ)(mm)
-
Overall Length (L)(mm)
-
Shank Diameter (d)(mm)
-
R Precision(μm)
-
Additional Classification
- Cutting Edge R Processing
- Manufactured Product
- Standard Neck Relief
- Stocked Product
Filtrer par jours d'expédition standard
-
- Tous les articles
- 5 jours ou moins
- 7 jours ou moins
- 8 jours ou moins
- 13 jours ou moins
Propriétés optionnelles
- Les spécifications et les dimensions de certaines pièces peuvent ne pas être intégralement indiquées. Pour plus de détails, reportez-vous aux catalogues des fabricants .
Variantes de ce produit
| Référence pièce |
|---|
| TSC-CR-EM2S1.5-R0.1 |
| TSC-CR-EM2S1.5-R0.2 |
| TSC-CR-EM2S1.5-R0.3 |
| TSC-CR-EM2S3-R0.4 |
| TSC-CR-EM2S3-R0.5 |
| TSC-CR-EM2S3-R1 |
| Référence pièce | Prix unitaire standard | Quantité minimale de commande | Remise sur volume | Jour d'expédition standard ? | Outer Diameter (D) (φ) | R Size (mm) | Flute Length (ℓ) (mm) | Overall Length (L) (mm) | Shank Diameter (d) (mm) | Length Under Neck (ℓ1) (mm) | R Precision (μm) | Additional Classification | Figure |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
29.65 € | 1 | Disponible | 5 jours | 1.5 | 0.1 | 3 | 40 | 4 | - | ±0.01 | Stocked Product | 1 | |
29.65 € | 1 | Disponible | 5 jours | 1.5 | 0.2 | 3 | 40 | 4 | - | ±0.01 | Stocked Product | 1 | |
29.65 € | 1 | Disponible | 5 jours | 1.5 | 0.3 | 3 | 40 | 4 | - | ±0.01 | Stocked Product | 1 | |
38.32 € | 1 | Disponible | 5 jours | 3 | 0.4 | 6 | 45 | 6 | - | ±0.01 | Stocked Product | 1 | |
38.15 € | 1 | Disponible | 5 jours | 3 | 0.5 | 6 | 45 | 6 | - | ±0.01 | Stocked Product | 1 | |
38.61 € | 1 | Disponible | 5 jours | 3 | 1 | 6 | 45 | 6 | - | ±0.01 | Stocked Product | 1 |
Assistance technique
Mode de paiement
Fabrication à la demande
Certificats
Copyright © MISUMI Corporation All Rights Reserved.