TSC series carbide long neck radius end mill, 4-flute / long neck model (TSC-CR-PEM4LB1-5-R0.3)
- Remise sur volume
Détails du produit:
Référence fabricant: TSC-CR-PEM4LB1-5-R0.3
Marque: MISUMI
Prix: 61.43 €
Délai de livraison: 5 jours
Données techniques:
Outer Diameter (D): 1 φ
R Size: 0.3 mm
Work Material: General Steel[◎] / Heat-Treated Steel[◎] / Acier inoxydable[○] / Fonte[○] / Aluminum Alloy[○] / Copper Alloy[○]
Flute Length (ℓ): 1.5 mm
Overall Length (L): 50 mm
- TS
- General Steel
- 4 Flutes
Référence pièce
Vous pouvez trouver ici le numéro
de référence lié au produit recherché.
TSC-CR-PEM4LB1-5-R0.3
Référence pièce
|
|---|
| TSC-CR-PEM4LB1-5-R0.3 |
| Référence pièce |
Prix unitaire standard
| Quantité minimale de commande | Remise sur volume | Outer Diameter (D) (φ) | R Size (mm) | Work Material | Flute Length (ℓ) (mm) | Overall Length (L) (mm) | Shank Diameter (d) (mm) | Length Under Neck (ℓ1) (mm) | Processing Applications | R Precision (μm) | Additional Classification | #6 | Figure | Under Neck Diameter d1 (mm) | Actual Effective Length Depends on Work Inclination Angle 30' (mm) | Actual Effective Length Depends on Work Inclination Angle 1° (mm) | Actual Effective Length Depends on Work Inclination Angle 2° (mm) | Actual Effective Length Depends on Work Inclination Angle 3° (mm) | |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
61.43 € | 1 | Disponible | 5 jours | 1 | 0.3 | General Steel[◎] / Heat-Treated Steel[◎] / Acier inoxydable[○] / Fonte[○] / Aluminum Alloy[○] / Copper Alloy[○] | 1.5 | 50 | 4 | 5 | Flat Surface / Side Surface / Curved Surface / Rainure / Inclined Cutting | ±0.005 | Stocked Product | - | 1 | 0.95 | 5.24 | 5.49 | 6.1 | 6.87 |
Loading...
Spécifications
Model Number
TSC-CR-PEM4LB (Stocked Product)
| Outer Diameter D |
Length Under Neck ℓ1 |
Radius R |
Flute Length ℓ |
Under Neck Diameter d1 |
Overall Length L |
Shank Diameter d |
Actual Effective Length Depends on Work Inclination Angle | Figure | |||
| 30' | 1° | 2° | 3° | ||||||||
| 1 |
3
|
0.05 0.1 0.2 0.3
|
1.5
|
0.95
|
50
|
4
|
3.14
|
3.30
|
3.66
|
4.12
|
1 |
|
4
|
4.19
|
4.40
|
4.88
|
5.49
|
|||||||
|
5
|
5.24
|
5.49
|
6.10
|
6.87
|
|||||||
|
6
|
6.28
|
6.59
|
7.32
|
8.24
|
|||||||
|
8
|
8.38
|
8.79
|
9.76
|
10.98
|
|||||||
|
10
|
10.47
|
10.99
|
12.21
|
13.73
|
|||||||
|
12
|
12.57
|
13.19
|
14.65
|
16.48
|
|||||||
| 1.2 |
5
|
0.1 0.2 0.3
|
1.8
|
1.15
|
50
|
4
|
5.24
|
5.49
|
6.10
|
6.87
|
1 |
|
10
|
10.47
|
10.99
|
12.21
|
13.73
|
|||||||
|
15
|
15.71
|
16.48
|
18.31
|
20.60
|
|||||||
| 1.5 |
6
|
0.1 0.5
|
2.3
|
1.45
|
50
|
4
|
6.28
|
6.59
|
7.32
|
8.24
|
1 |
|
12
|
12.57
|
13.19
|
14.65
|
16.48
|
|||||||
|
16
|
16.75
|
17.58
|
19.53
|
21.97
|
|||||||
|
6
|
0.2 0.3
|
6.28
|
6.59
|
7.32
|
8.24
|
||||||
|
8
|
8.38
|
8.79
|
9.76
|
10.98
|
|||||||
|
10
|
10.47
|
10.99
|
12.21
|
13.73
|
|||||||
|
12
|
12.57
|
13.19
|
14.65
|
16.48
|
|||||||
|
16
|
16.75
|
17.58
|
19.53
|
21.97
|
|||||||
| 2 |
8
|
0.1 0.3
|
3
|
1.95
|
50
|
4
|
8.38
|
8.79
|
9.76
|
10.98
|
1 |
|
12
|
12.57
|
13.19
|
14.65
|
16.48
|
|||||||
|
16
|
16.75
|
17.58
|
19.53
|
Without Interference
|
|||||||
|
20
|
70
|
20.94
|
21.98
|
24.41
|
Without Interference
|
||||||
|
24
|
25.13
|
26.38
|
Without Interference
|
Without Interference
|
|||||||
|
8
|
0.2 0.5
|
3
|
1.95
|
50
|
4
|
8.38
|
8.79
|
9.76
|
10.98
|
1 | |
|
10
|
10.47
|
10.99
|
12.21
|
13.73
|
|||||||
|
12
|
12.57
|
13.19
|
14.65
|
16.48
|
|||||||
|
14
|
14.66
|
15.39
|
17.09
|
19.22
|
|||||||
|
16
|
16.75
|
17.58
|
19.53
|
Without Interference
|
|||||||
|
20
|
70
|
20.94
|
21.98
|
24.41
|
Without Interference
|
||||||
|
24
|
25.13
|
26.38
|
Without Interference
|
Without Interference
|
|||||||
| 2.5 |
15
|
0.1 0.2 0.3 0.5
|
3.7
|
2.4
|
50
|
4
|
15.71
|
16.48
|
18.31
|
Without Interference
|
1 |
|
20
|
70
|
20.94
|
21.98
|
Without Interference
|
Without Interference
|
||||||
|
30
|
31.41
|
32.97
|
Without Interference
|
Without Interference
|
|||||||
| 3 |
16
|
0.1 0.2 0.3 0.5 1
|
4.5
|
2.9
|
70
|
6
|
16.75
|
17.58
|
19.53
|
21.97
|
1 |
|
20
|
20.94
|
21.98
|
24.41
|
27.46
|
|||||||
|
25
|
26.18
|
27.47
|
30.51
|
Without Interference
|
|||||||
|
30
|
31.41
|
32.97
|
36.62
|
Without Interference
|
|||||||
|
40
|
100
|
41.88
|
43.96
|
Without Interference
|
Without Interference
|
||||||
| 4 |
16
|
0.1 0.2 0.5 1
|
6
|
3.8
|
50
|
6
|
16.75
|
17.58
|
19.53
|
Without Interference
|
1 |
|
20
|
70
|
20.94
|
21.98
|
24.41
|
Without Interference
|
||||||
|
30
|
31.41
|
32.97
|
36.62
|
Without Interference
|
|||||||
|
40
|
100
|
41.88
|
43.96
|
Without Interference
|
Without Interference
|
||||||
| 5 |
25
|
0.1 0.2 0.3 0.5 1
|
7.5
|
4.8
|
70
|
6
|
26.18
|
27.47
|
Without Interference
|
Without Interference
|
1 |
|
35
|
100
|
36.65
|
Without Interference
|
Without Interference
|
Without Interference
|
||||||
| 6 |
30
|
0.1 0.2 0.3 0.5 1
|
9
|
5.8
|
70
|
6
|
Without Interference
|
Without Interference
|
Without Interference
|
Without Interference
|
2 |
|
40
|
100
|
Without Interference
|
Without Interference
|
Without Interference
|
Without Interference
|
||||||
Model Number
LN-TSC-CR-EM4S (Manufactured Product)
| Outer Diameter D |
Radius R |
Length Under Neck ℓ1 1 mm Increment Designation |
Flute Length ℓ |
Under Neck Diameter d1 |
Overall Length L |
Shank Diameter d |
Figure |
| 2 | 0.5 | 9 ~ 21 | 4 | 1.95 | 40 | 4 | 3 |
| 3 | 0.5 | 11 ~ 21 | 6 | 2.9 | 45 | 6 | 3 |
| 4 | 0.5 | 13 ~ 23 | 8 | 3.8 | 45 | 6 | 3 |
| 5 | 0.5 | 17 ~ 25 | 12 | 4.8 | 45 | 6 | 3 |
[ ! ]When ordering manufactured products, be sure to confirm the ordering examples as the points below differ when ordering a stocked product.
(1) "LN-" is prepended to the start of the model number. (2) "S" is appended to the end of the model number.(3) The order for specifying the "length under neck" and "radius" is the opposite from that of stocked products.
For Cutting Conditions, Refer to >>Click here.
Plus d'informations
● Radius (R) accuracy is of high quality at ±5 μm (compared to our other products), allowing for high-precision deep groove machining to be achieved.
● It adopts a 4-flute shape to allow higher feed configurations compared to machining with 2-flute models. 
Informations de base
| Number of Flutes(sheet) | 4 | Model | Long Neck Radius | Coating | For High Hardness (Silicone-Based) |
|---|---|---|---|---|---|
| Torsion Angle (θ) | Standard Helix (30 to 40°) |
Vous vous trouvez sur la page de TSC series carbide long neck radius end mill, 4-flute / long neck model, le numéro d'article est le suivant: TSC-CR-PEM4LB1-5-R0.3.
Veuillez trouver plus de détails concernant les particularités et les dimensions sous le numéro d'article TSC-CR-PEM4LB1-5-R0.3.
Configurer
Propriétés de base
-
Work Material
- General Steel
- Heat-Treated Steel
- High-Hardness Steel ~ HRC55
- Acier inoxydable
- Fonte
- Aluminum Alloy
- Copper Alloy
-
Processing Applications
- Flat Surface
- Side Surface
- Curved Surface
- Rainure
- Inclined Cutting
-
#6
-
Type
- LN-TSC-CR-EM4S
- TSC-CR-PEM4LB
-
Outer Diameter (D)(φ)
-
R Size(mm)
-
Flute Length (ℓ)(mm)
-
Overall Length (L)(mm)
-
Shank Diameter (d)(mm)
-
Length Under Neck (ℓ1)(mm)
-
R Precision(μm)
-
Additional Classification
- Manufactured Product
- Stocked Product
Filtrer par jours d'expédition standard
-
- Tous les articles
- 5 jours ou moins
- 8 jours ou moins
- 13 jours ou moins
- 24 jours ou moins
Propriétés optionnelles
- Les spécifications et les dimensions de certaines pièces peuvent ne pas être intégralement indiquées. Pour plus de détails, reportez-vous aux catalogues des fabricants .
Variantes de ce produit
| Référence pièce |
|---|
| TSC-CR-PEM4LB1-10-R0.3 |
| TSC-CR-PEM4LB1-12-R0.05 |
| TSC-CR-PEM4LB1-12-R0.1 |
| TSC-CR-PEM4LB1-6-R0.05 |
| TSC-CR-PEM4LB1-6-R0.1 |
| TSC-CR-PEM4LB1-6-R0.2 |
| Référence pièce | Prix unitaire standard | Quantité minimale de commande | Remise sur volume | Jour d'expédition standard ? | Outer Diameter (D) (φ) | R Size (mm) | Work Material | Flute Length (ℓ) (mm) | Overall Length (L) (mm) | Shank Diameter (d) (mm) | Length Under Neck (ℓ1) (mm) | Processing Applications | R Precision (μm) | Additional Classification | #6 | Figure | Under Neck Diameter d1 (mm) | Actual Effective Length Depends on Work Inclination Angle 30' (mm) | Actual Effective Length Depends on Work Inclination Angle 1° (mm) | Actual Effective Length Depends on Work Inclination Angle 2° (mm) | Actual Effective Length Depends on Work Inclination Angle 3° (mm) |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
56.17 € | 1 | Disponible | 5 jours | 1 | 0.3 | Copper Alloy[◯] / Aluminum Alloy[◯] / Fonte[◯] / Acier inoxydable[◯] / Heat-Treated Steel[◎] / General Steel[◎] | 1.5 | 50 | 4 | 10 | Inclined Cutting / Rainure / Curved Surface / Side Surface / Flat Surface | ±0.005 | Stocked Product | - | 1 | 0.95 | 10.47 | 10.99 | 12.21 | 13.73 | |
61.43 € | 1 | Disponible | 5 jours | 1 | 0.05 | Copper Alloy[◯] / Aluminum Alloy[◯] / Fonte[◯] / Acier inoxydable[◯] / Heat-Treated Steel[◎] / General Steel[◎] | 1.5 | 50 | 4 | 12 | Inclined Cutting / Rainure / Curved Surface / Side Surface / Flat Surface | ±0.005 | Stocked Product | - | 1 | 0.95 | 12.57 | 13.19 | 14.65 | 16.48 | |
61.43 € | 1 | Disponible | 5 jours | 1 | 0.1 | Copper Alloy[◯] / Aluminum Alloy[◯] / Fonte[◯] / Acier inoxydable[◯] / Heat-Treated Steel[◎] / General Steel[◎] | 1.5 | 50 | 4 | 12 | Inclined Cutting / Rainure / Curved Surface / Side Surface / Flat Surface | ±0.005 | Stocked Product | - | 1 | 0.95 | 12.57 | 13.19 | 14.65 | 16.48 | |
61.43 € | 1 | Disponible | 5 jours | 1 | 0.05 | Copper Alloy[◯] / Aluminum Alloy[◯] / Fonte[◯] / Acier inoxydable[◯] / Heat-Treated Steel[◎] / General Steel[◎] | 1.5 | 50 | 4 | 6 | Inclined Cutting / Rainure / Curved Surface / Side Surface / Flat Surface | ±0.005 | Stocked Product | - | 1 | 0.95 | 6.28 | 6.59 | 7.32 | 8.24 | |
61.43 € | 1 | Disponible | 5 jours | 1 | 0.1 | Copper Alloy[◯] / Aluminum Alloy[◯] / Fonte[◯] / Acier inoxydable[◯] / Heat-Treated Steel[◎] / General Steel[◎] | 1.5 | 50 | 4 | 6 | Inclined Cutting / Rainure / Curved Surface / Side Surface / Flat Surface | ±0.005 | Stocked Product | - | 1 | 0.95 | 6.28 | 6.59 | 7.32 | 8.24 | |
41.55 € | 1 | Disponible | 5 jours | 1 | 0.2 | Copper Alloy[◯] / Aluminum Alloy[◯] / Fonte[◯] / Acier inoxydable[◯] / Heat-Treated Steel[◎] / General Steel[◎] | 1.5 | 50 | 4 | 6 | Inclined Cutting / Rainure / Curved Surface / Side Surface / Flat Surface | ±0.005 | Stocked Product | - | 1 | 0.95 | 6.28 | 6.59 | 7.32 | 8.24 |
Assistance technique
Mode de paiement
Fabrication à la demande
Certificats
Copyright © MISUMI Corporation All Rights Reserved.