TSC series carbide roughing end mill, 45° spiral / fine pitch / short model (TSC-HRFPS14)

TSC series carbide roughing end mill, 45° spiral / fine pitch / short model TSC-HRFPS14
  • Remise sur volume

Détails du produit:

Référence fabricant: TSC-HRFPS14

Marque: MISUMI

Prix: 98.03

Délai de livraison: 5 jours


Données techniques:

Outer Diameter (D): 14 φ

Flute Length (ℓ): 26 mm

Number of Flutes: 4 sheet

Shank Diameter (d): 12 mm

Overall Length (L): 85 mm


  • TS
  • General Steel
  • S (Short)

Référence pièce

Vous pouvez trouver ici le numéro
de référence lié au produit recherché.

TSC-HRFPS14

TSC series carbide roughing end mill, 45° spiral / fine pitch / short model:Related Image

Référence pièce
TSC-HRFPS14
Référence pièce
Prix unitaire standard
Quantité minimale de commandeRemise sur volume
Jour
d'expédition standard
?
Outer Diameter (D)
(φ)
Flute Length (ℓ)
(mm)
Number of Flutes
(sheet)
Shank Diameter (d)
(mm)
Overall Length (L)
(mm)
Length Under Neck (ℓ1)
(mm)
Processing Applications Additional Classification Figure ● Inventory Product □ Manufacturer Product

98.03 €

1 Disponible 5 jours 142641285-Flat Surface / Side Surface / Inclined CuttingStocked Product2

Loading...

  1. 1

Spécifications

TSC series carbide roughing end mill, 45° spiral / fine pitch / short model:Related Image

 

Model Number   Flute Length
Overall Length
L
Shank Diameter
d
Number of Flutes Figure
Outer Diameter
D
TSC-HRFPS 5 10 60 6 3 1
6 12 60 6 3 2
7 14 65 6 4 3
8 16 70 8 4 2
9 18 70 8 4 3
10 20 80 10 4 2
12 24 85 12 4 2
14 26 85 12 4 2
16 32 100 16 4 2
18 32 100 16 4 3
20 38 110 20 4 2



For Cutting Conditions, Refer to >>Click here.

Plus d'informations


It has a new TS film coating with much greater oxidation resistance and hardness than conventional films, yielding a longer operational life and is ideal for high speed machining / dry machining.
Adopts a 45° twisted structure that allows for high speed rotation.
Adopts a fine pitch nick that delivers a finish with good surface roughness after machining.

Informations de base

Work Material General Steel / Heat-Treated Steel / High-Hardness Steel ~ HRC55 / Fonte / Aluminum Alloy / Copper Alloy Model Ébauche Coating For High Hardness (Silicone-Based)
Geometry C Surface Torsion Angle (θ) Powerful Helix (45° to 60°) Tolerance of OD(mm) ±0.06

Vous vous trouvez sur la page de TSC series carbide roughing end mill, 45° spiral / fine pitch / short model, le numéro d'article est le suivant: TSC-HRFPS14.
Veuillez trouver plus de détails concernant les particularités et les dimensions sous le numéro d'article TSC-HRFPS14.

Variantes de ce produit

Référence pièce
TSC-HRFPS10
TSC-HRFPS12
TSC-HRFPS16
TSC-HRFPS18
TSC-HRFPS20
TSC-HRFPS5
Référence piècePrix unitaire standardQuantité minimale de commandeRemise sur volumeJour
d'expédition standard
?
Outer Diameter (D)
(φ)
Flute Length (ℓ)
(mm)
Number of Flutes
(sheet)
Shank Diameter (d)
(mm)
Overall Length (L)
(mm)
Length Under Neck (ℓ1)
(mm)
Processing Applications Additional Classification Figure ● Inventory Product □ Manufacturer Product

66.12 €

1 Disponible 5 jours 102041080-Inclined Cutting / Flat Surface / Side SurfaceStocked Product2

83.86 €

1 Disponible 5 jours 122441285-Inclined Cutting / Flat Surface / Side SurfaceStocked Product2

90.40 €

1 Disponible 5 jours 1632416100-Inclined Cutting / Flat Surface / Side SurfaceStocked Product2

146.94 €

1 Disponible 5 jours 1832416100-Inclined Cutting / Flat Surface / Side SurfaceStocked Product3

144.92 €

1 Disponible 5 jours 2038420110-Inclined Cutting / Flat Surface / Side SurfaceStocked Product2

45.11 €

1 Disponible 5 jours 5103660-Inclined Cutting / Rainure / Flat Surface / Side SurfaceStocked Product1

Assistance technique