TS coated carbide roughing end mill, 45°spiral, fine pitch / long shank, regular model
Cliquez sur cette image pour l'agrandir.
Cliquez sur cette image pour l'agrandir.
- Remise sur volume
- TS
- General Steel
- R (Regular)
Référence pièce
Vous pouvez trouver ici le numéro
de référence lié au produit recherché.
Référence pièce
|
|---|
| SN-TSC-LS-HRFPR6-[20-65/1]-15 |
| TSC-LS-HRFPR6 |
| Référence pièce |
Prix unitaire standard
| Quantité minimale de commande | Remise sur volume | Outer Diameter (D) (φ) | Flute Length (ℓ) (mm) | Number of Flutes (sheet) | Shank Diameter (d) (mm) | Overall Length (L) (mm) | Length Under Neck (ℓ1) (mm) | Processing Applications | Additional Classification | Figure | ● Inventory Product □ Manufacturer Product | |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
- | 1 | 8 jours | 6 | 15 | 3 | 6 | 100 | 20 ～ 65 | Flat Surface / Side Surface / Rainure / Inclined Cutting | Standard Neck Relief | 1 | □ | ||
113.12 € | 1 | Disponible | 5 jours | 6 | 15 | 3 | 6 | 100 | - | Flat Surface / Side Surface / Rainure / Inclined Cutting | Stocked Product | 1 | ● |
Loading...
Spécifications
| Model Number | Shank Diameter d |
Flute Length ℓ |
Overall Length L |
Number of Flutes | Figure | ||
| Outer Diameter D |
Shank Diameter d |
||||||
| TSC-LS-HRFPR | 6 | — | 6 | 15 | 100 | 3 | 1 |
| 8 | 6 | 6 | 20 | 100 | 4 | 2 | |
| 8 | — | 8 | 20 | 100 | 4 | 1 | |
| 10 | 8 | 8 | 25 | 100 | 4 | 2 | |
| 10 | — | 10 | 25 | 100 | 4 | 1 | |
| 12 | 10 | 10 | 30 | 120 | 4 | 2 | |
| 12 | — | 12 | 30 | 120 | 4 | 1 | |
| 14 | — | 12 | 35 | 120 | 4 | 2 | |
| 16 | — | 16 | 40 | 120 | 4 | 1 | |
| 18 | — | 16 | 45 | 125 | 4 | 2 | |
| 20 | — | 20 | 45 | 150 | 4 | 1 |
[ ! ]For shank diameter (d) specifications listed in blue, specify both a outer diameter (D) and shank diameter (d).
For Cutting Conditions, Refer to >>Click here.
Plus d'informations
● It has a new TS film coating with much greater oxidation resistance and hardness than conventional films, yielding a longer operational life and is ideal for high speed machining / dry machining.
● Adopts a 45° twisted structure that allows for high speed rotation.
● Adopts a fine pitch nick that delivers a finish with good surface roughness after machining.
● The long shank models are ideal for machining deep grooves.
Informations de base
| Work Material | General Steel / Heat-Treated Steel / High-Hardness Steel ~ HRC55 / Aluminum Alloy / Copper Alloy | Model | Ébauche | Coating | For High Hardness (Silicone-Based) |
|---|---|---|---|---|---|
| Geometry | C Surface | Torsion Angle (θ) | Powerful Helix (45° to 60°) | Tolerance of OD(mm) | ±0.06 |
Configurer
Propriétés de base
-
Outer Diameter (D)(φ)
-
Flute Length (ℓ)(mm)
-
Number of Flutes(sheet)
-
Shank Diameter (d)(mm)
-
Overall Length (L)(mm)
-
Length Under Neck (ℓ1)(mm)
-
Additional Classification
- Standard Neck Relief
- Stocked Product
-
Type
- SN-TSC-LS-HRFPR
- TSC-LS-HRFPR
-
Processing Applications
- Flat Surface
- Side Surface
- Rainure
- Inclined Cutting
Filtrer par jours d'expédition standard
-
- Tous les articles
- 5 jours ou moins
- 8 jours ou moins
Propriétés optionnelles
- Les spécifications et les dimensions de certaines pièces peuvent ne pas être intégralement indiquées. Pour plus de détails, reportez-vous aux catalogues des fabricants .
Assistance technique
Mode de paiement
Fabrication à la demande
Certificats
Copyright © MISUMI Corporation All Rights Reserved.