TSC Series Carbide Square End Mill for Stainless Steel Machining, 3-Flute, 60° Spiral / Short Model
- Remise sur volume
- TS
- SUS
- 3 Flutes
- S (Short)
Référence pièce
Vous pouvez trouver ici le numéro
de référence lié au produit recherché.
Référence pièce
|
|---|
| TSC-FMS-HEM3S3 |
| TSC-FMS-HEM3S4 |
| TSC-FMS-HEM3S5 |
| TSC-FMS-HEM3S6 |
| TSC-FMS-HEM3S8 |
| TSC-FMS-HEM3S10 |
| TSC-FMS-HEM3S12 |
| TSC-FMS-HEM3S16 |
| Référence pièce |
Prix unitaire standard
| Quantité minimale de commande | Remise sur volume | Outer Diameter (D) (φ) | Flute Length (ℓ) (mm) | Shank Diameter (d) (mm) | Overall Length (L) (mm) | Tolerance of OD (mm) | Figure | |
|---|---|---|---|---|---|---|---|---|---|---|
54.29 € | 1 | Disponible | 5 jours | 3 | 7 | 6 | 60 | 0 ~ -0.02 | 1 | |
56.42 € | 1 | Disponible | 5 jours | 4 | 9 | 6 | 60 | 0 ~ -0.02 | 1 | |
64.36 € | 1 | Disponible | 5 jours | 5 | 11 | 6 | 60 | 0 ~ -0.02 | 1 | |
62.12 € | 1 | Disponible | 5 jours | 6 | 14 | 6 | 60 | -0.01 ~ -0.03 | 2 | |
87.00 € | 1 | Disponible | 5 jours | 8 | 18 | 8 | 80 | -0.01 ~ -0.03 | 2 | |
103.42 € | 1 | Disponible | 5 jours | 10 | 22 | 10 | 80 | -0.01 ~ -0.03 | 2 | |
97.31 € | 1 | Disponible | 5 jours | 12 | 26 | 12 | 100 | -0.01 ~ -0.03 | 2 | |
185.16 € | 1 | Disponible | 5 jours | 16 | 35 | 16 | 105 | -0.01 ~ -0.03 | 2 |
Loading...
Spécifications
| Model Number | Flute Length ℓ |
Overall Length L |
Shank Diameter d |
Figure | |
| Outer Diameter D |
|||||
| TSC-FMS-HEM3S | 3 | 7 | 60 | 6 | 1 |
| 4 | 9 | 60 | 6 | 1 | |
| 5 | 11 | 60 | 6 | 1 | |
| 6 | 14 | 60 | 6 | 2 | |
| 8 | 18 | 80 | 8 | 2 | |
| 10 | 22 | 80 | 10 | 2 | |
| 12 | 26 | 100 | 12 | 2 | |
| 16 | 35 | 105 | 16 | 2 |
For Cutting Conditions, Refer to >>Click here.
Plus d'informations
● An original MISUMI shape that is ideal for machining SUS304 work materials. For work materials with low thermal conductivity that are easily heated up, the proprietary blade shape suppresses the effects of heat on the blade tip, dramatically improving wear resistance and reducing the chances of melting and becoming stuck.
● The TS coating consisting of a nitride-based composite film with a fully crystalline structure means that it realizes a high oxidation resistance temperature and high hardness. It achieves a longer lifespan for high speed machining and dry machining of SUS work materials.
● A blade shape ideal for machining grooves / side surfaces.
[ ! ]This product has a special groove shape with a performance that may not be reproducible without the use of Misumi's dedicated re-grinding. 
Informations de base
| Work Material | General Steel / Heat-Treated Steel / Acier inoxydable / Aluminum Alloy / Copper Alloy | Number of Flutes(sheet) | 3 | Model | Carré |
|---|---|---|---|---|---|
| Coating | For High Hardness (Silicone-Based) | Processing Applications | Flat Surface / Side Surface / Rainure / Inclined Cutting / Countersunk | Geometry | C Surface |
| Torsion Angle (θ) | Powerful Helix (45° to 60°) | Additional Classification | Stocked Product | ● Inventory Product □ Manufacturer Product | ● |
Configurer
Propriétés de base
-
Outer Diameter (D)(φ)
-
Flute Length (ℓ)(mm)
-
Shank Diameter (d)(mm)
-
Overall Length (L)(mm)
-
Type
- TSC-FMS-HEM3S
Filtrer par jours d'expédition standard
-
- Tous les articles
- 5 jours ou moins
Propriétés optionnelles
- Les spécifications et les dimensions de certaines pièces peuvent ne pas être intégralement indiquées. Pour plus de détails, reportez-vous aux catalogues des fabricants .
Assistance technique
Mode de paiement
Fabrication à la demande
Certificats
Copyright © MISUMI Corporation All Rights Reserved.