TSC Series Carbide Ball End Mill for Stainless Steel Machining, 2-Flute / Short Model
- Remise sur volume
- TS
- SUS
- 2 Flutes
- S (Short)
Référence pièce
Vous pouvez trouver ici le numéro
de référence lié au produit recherché.
Référence pièce
|
|---|
| TSC-FMS-BEM2S1 |
| TSC-FMS-BEM2S1.5 |
| TSC-FMS-BEM2S2 |
| TSC-FMS-BEM2S3 |
| TSC-FMS-BEM2S5 |
| Référence pièce |
Prix unitaire standard
| Quantité minimale de commande | Remise sur volume | R Size (mm) | Flute Length (ℓ) (mm) | Overall Length (L) (mm) | Shank Diameter (d) (mm) | Outer Diameter D (mm) | Figure | Length Under Neck (θ) (Degree) | |
|---|---|---|---|---|---|---|---|---|---|---|---|
103.49 € | 1 | Disponible | 5 jours | 1 | 3 | 50 | 6 | 2 | 1 | 10° | |
109.98 € | 1 | Disponible | 5 jours | 1.5 | 4.5 | 60 | 6 | 3 | 1 | 10° | |
110.04 € | 1 | Disponible | 5 jours | 2 | 6 | 60 | 6 | 4 | 1 | 10° | |
116.54 € | 1 | Disponible | 5 jours | 3 | 9 | 90 | 6 | 6 | 2 | - | |
169.24 € | 1 | Disponible | 5 jours | 5 | 15 | 100 | 10 | 10 | 2 | - |
Loading...
Spécifications
| Model Number | Flute Length ℓ |
Outer Diameter D |
Overall Length L |
Shank Diameter d |
Figure | |
| Tip R |
||||||
| TSC-FMS-BEM2S | 1 | 3 | 2 | 50 | 6 | 1 |
| 1.5 | 4.5 | 3 | 60 | 6 | 1 | |
| 2 | 6 | 4 | 60 | 6 | 1 | |
| 3 | 9 | 6 | 90 | 6 | 2 | |
| 5 | 15 | 10 | 100 | 10 | 2 |
For Cutting Conditions, Refer to >>Click here.
Plus d'informations
● The rounded blade shape and special blade coating provide low thermal conductivity, meaning that even when machining materials that are likely to heat up the blade, the blade tip remains strong, the tip shape is stable and a long operational life is realized.
● The TS coating consisting of a nitride-based composite film with a fully crystalline structure means that it realizes a high oxidation resistance temperature and high hardness. Achieves a longer lifespan for high speed machining and dry machining of SUS work materials.
[ ! ]This product has a special shape with a performance that may not be reproducible without the use of Misumi's dedicated re-grinding.
Informations de base
| Model | Bore | Work Material | General Steel / Heat-Treated Steel / Acier inoxydable / Fonte | Number of Flutes(sheet) | 2 |
|---|---|---|---|---|---|
| Coating | For High Hardness (Silicone-Based) | R Precision(μm) | ±0.01 | Processing Applications | Curved Surface / Side Surface / Carving / R-Groove |
| Inventory Classification | Stocked Product | Torsion Availability | Included |
Configurer
Propriétés de base
-
R Size(mm)
-
Flute Length (ℓ)(mm)
-
Overall Length (L)(mm)
-
Shank Diameter (d)(mm)
-
Type
- TSC-FMS-BEM2S
Filtrer par jours d'expédition standard
-
- Tous les articles
- 5 jours ou moins
Propriétés optionnelles
- Les spécifications et les dimensions de certaines pièces peuvent ne pas être intégralement indiquées. Pour plus de détails, reportez-vous aux catalogues des fabricants .
Assistance technique
Mode de paiement
Fabrication à la demande
Certificats
Copyright © MISUMI Corporation All Rights Reserved.