Carbide Square End Mill for Aluminum Machining, 3-Flute / Stub Model
- Remise sur volume
- Non-Coated
- Aluminum
- 3 Flutes
- B (Stub)
Référence pièce
Vous pouvez trouver ici le numéro
de référence lié au produit recherché.
Référence pièce
|
|---|
| SEC-ALHEM3B1 |
| SEC-ALHEM3B2 |
| SEC-ALHEM3B3 |
| SEC-ALHEM3B4 |
| SEC-ALHEM3B5 |
| SEC-ALHEM3B6 |
| SEC-ALHEM3B8 |
| SEC-ALHEM3B10 |
| SEC-ALHEM3B12 |
| Référence pièce |
Prix unitaire standard
| Quantité minimale de commande | Remise sur volume | Outer Diameter (D) (φ) | Flute Length (ℓ) (mm) | Shank Diameter (d) (mm) | Overall Length (L) (mm) | Length Under Neck (ℓ1) (mm) | Figure | Under Neck Diameter d1 (mm) | |
|---|---|---|---|---|---|---|---|---|---|---|---|
36.35 € | 1 | Disponible | 5 jours | 1 | 1.5 | 4 | 40 | 3 | 1 | 0.95 | |
26.68 € | 1 | Disponible | 5 jours | 2 | 3 | 4 | 40 | 6 | 1 | 1.94 | |
32.08 € | 1 | Disponible | 5 jours | 3 | 4.5 | 6 | 50 | 9 | 1 | 2.85 | |
31.15 € | 1 | Disponible | 5 jours | 4 | 6 | 6 | 50 | 12 | 1 | 3.8 | |
39.75 € | 1 | Disponible | 5 jours | 5 | 7.5 | 6 | 55 | 15 | 1 | 4.8 | |
36.75 € | 1 | Disponible | 5 jours | 6 | 9 | 6 | 55 | 18 | 2 | 5.8 | |
68.61 € | 1 | Disponible | 5 jours | 8 | 12 | 8 | 65 | 24 | 2 | 7.8 | |
72.89 € | 1 | Disponible | 5 jours | 10 | 15 | 10 | 75 | 30 | 2 | 9.8 | |
128.55 € | 1 | Disponible | 5 jours | 12 | 18 | 12 | 80 | 36 | 2 | 11.8 |
Loading...
Spécifications
| Model Number | Flute Length ℓ |
Under Neck Diameter d1 |
Length Under Neck ℓ1 |
Overall Length L |
Shank Diameter d |
Figure | |
| Outer Diameter D |
|||||||
| SEC-ALHEM3B | 1 | 1.5 | 0.95 | 3 | 40 | 4 | 1 |
| 2 | 3 | 1.94 | 6 | 40 | 4 | 1 | |
| 3 | 4.5 | 2.85 | 9 | 50 | 6 | 1 | |
| 4 | 6 | 3.8 | 12 | 50 | 6 | 1 | |
| 5 | 7.5 | 4.8 | 15 | 55 | 6 | 1 | |
| 6 | 9 | 5.8 | 18 | 55 | 6 | 2 | |
| 8 | 12 | 7.8 | 24 | 65 | 8 | 2 | |
| 10 | 15 | 9.8 | 30 | 75 | 10 | 2 | |
| 12 | 18 | 11.8 | 36 | 80 | 12 | 2 |
For Cutting Conditions, Refer to >>Click here.
Plus d'informations
● It has a different blade shape than other Misumi aluminum end mills with consideration for plunge machining along the Z axis. The 3-flute shape, high-rigidity peripheral blade and grooved structure for good chip discharge makes it ideal for a wide range of heavy cutting work and continuous machining, including plunging and routing.
● It adopts a sharp cutting edge that prevents the built-up edge that is unique to aluminum.
● The unique tip pocket shape allows for the cutting of grooves to be achieved with 2 flutes in parallel at the cutting depth. 
Informations de base
| Work Material | Aluminum Alloy / Copper Alloy / Graphite / Résine | Number of Flutes(sheet) | 3 | Model | Carré |
|---|---|---|---|---|---|
| Coating | Non revêtu | Processing Applications | Flat Surface / Side Surface / Rainure / Thrust (Z-Feed) / Inclined Cutting | Geometry | Avec engagement |
| Torsion Angle (θ) | Powerful Helix (45° to 60°) | Additional Classification | Stocked Product | Tolerance of OD(mm) | 0 ~ -0.02 |
| ● Inventory Product □ Manufacturer Product | ● |
Configurer
Propriétés de base
-
Outer Diameter (D)(φ)
-
Flute Length (ℓ)(mm)
-
Shank Diameter (d)(mm)
-
Overall Length (L)(mm)
-
Length Under Neck (ℓ1)(mm)
-
Type
- SEC-ALHEM3B
Filtrer par jours d'expédition standard
-
- Tous les articles
- 5 jours ou moins
Propriétés optionnelles
- Les spécifications et les dimensions de certaines pièces peuvent ne pas être intégralement indiquées. Pour plus de détails, reportez-vous aux catalogues des fabricants .
Assistance technique
Mode de paiement
Fabrication à la demande
Certificats
Copyright © MISUMI Corporation All Rights Reserved.