TiAlN Coated Carbide High-Speed High-Feed Machining Drill, With Oil Holes / Stub, Regular
Cliquez sur cette image pour l'agrandir.
Cliquez sur cette image pour l'agrandir.
- Remise sur volume
Référence pièce
Vous pouvez trouver ici le numéro
de référence lié au produit recherché.
Référence pièce
|
|---|
| TAC-HRESDB4.2 |
| TAC-HRESDR7 |
| Référence pièce |
Prix unitaire standard
| Quantité minimale de commande | Remise sur volume | Hole diameter (drill diameter) D (mm) | Groove Length L (mm) | Overall Length L (mm) | Shank Diameter d | Diameter Tolerance | Tolerance of Shank Diameter | |
|---|---|---|---|---|---|---|---|---|---|---|
111.36 € | 1 | Disponible | 5 jours | 4.2 | 24 | 66 | 6 | +0.016 ~ +0.004 | 0 ~ -0.008 | |
154.89 € | 1 | Disponible | 5 jours | 7 | 53 | 91 | 8 | +0.021 ~ +0.006 | 0 ~ -0.009 |
Loading...
Spécifications
Model Number
TAC-HRESDB (Stub)
| Diameter D | Groove Length ℓ | Overall Length L | Shank Diameter d |
| 3 | 20 | 62 | 6 |
| 3.3 | 20 | 62 | 6 |
| 3.5 | 20 | 62 | 6 |
| 4 | 24 | 66 | 6 |
| 4.2 | 24 | 66 | 6 |
| 4.5 | 24 | 66 | 6 |
| 5 | 28 | 66 | 6 |
| 5.5 | 28 | 66 | 6 |
| 6 | 28 | 66 | 6 |
| 6.5 | 34 | 79 | 8 |
| 6.8 | 34 | 79 | 8 |
| 7 | 34 | 79 | 8 |
| 7.5 | 41 | 79 | 8 |
| 7.8 | 41 | 79 | 8 |
| 8 | 41 | 79 | 8 |
| 8.5 | 47 | 89 | 10 |
| 9 | 47 | 89 | 10 |
| 10 | 47 | 89 | 10 |
| 10.3 | 55 | 102 | 12 |
| 11 | 55 | 102 | 12 |
| 12 | 55 | 102 | 12 |
| 13 | 60 | 107 | 14 |
Model Number
TAC-HRESDR (Regular)
| Diameter D | Groove Length ℓ | Overall Length L | Shank Diameter d |
| 3 | 28 | 66 | 6 |
| 3.3 | 28 | 66 | 6 |
| 3.5 | 28 | 66 | 6 |
| 4 | 36 | 74 | 6 |
| 4.2 | 36 | 74 | 6 |
| 4.5 | 36 | 74 | 6 |
| 5 | 44 | 82 | 6 |
| 6 | 44 | 82 | 6 |
| 6.5 | 53 | 91 | 8 |
| 6.8 | 53 | 91 | 8 |
| 7 | 53 | 91 | 8 |
| 7.5 | 53 | 91 | 8 |
| 7.8 | 53 | 91 | 8 |
| 8 | 53 | 91 | 8 |
| 10 | 61 | 103 | 10 |
| 12 | 71 | 118 | 12 |
| 13 | 77 | 124 | 14 |
For Cutting Conditions, Refer to >>Click here.
Plus d'informations
● Internal lubrication enables cutting chips to be discharged efficiently and the lifetime of the tool is extended.
● Capable of high-feed, high-speed cutting on everything from general steel to stainless steel.
● Adopting a corrugated blade provides for outstanding sharpness and strength and also promotes the discharge of cutting chips.
● With three rakes + R-model thinning, high-speed cutting is achieved due to outstanding strength and stability.
● Chipping is prevented with a shoulder C-plane coating.
● Adopting a diameter plus tolerance allows holes to be finished with high accuracy closer to the hole tolerance and fewer hole diameter minus values after regrinding.
Informations de base
| work material | General Steel / Heat-Treated Steel / Acier inoxydable / Fonte / Cuivre | Tool Material Type | Carbure | Shank Type | Tige de fraise |
|---|---|---|---|---|---|
| Coating Y/N | Included | Coating Type | TiAlN | With/without Oil Hole | Included |
| Point Angle(°) | 140 | Thinning | Included |
Configurer
Propriétés de base
-
Hole diameter (drill diameter) D(mm)
-
Groove Length L(mm)
-
Overall Length L(mm)
-
Type
- TAC-HRESDB
- TAC-HRESDR
Filtrer par jours d'expédition standard
-
- Tous les articles
- 5 jours ou moins
Propriétés optionnelles
- Les spécifications et les dimensions de certaines pièces peuvent ne pas être intégralement indiquées. Pour plus de détails, reportez-vous aux catalogues des fabricants .
Assistance technique
Mode de paiement
Fabrication à la demande
Certificats
Copyright © MISUMI Corporation All Rights Reserved.