TiAlN Coated Carbide Long Drill, Straight Shank
Cliquez sur cette image pour l'agrandir.
Cliquez sur cette image pour l'agrandir.
- Remise sur volume
Référence pièce
Vous pouvez trouver ici le numéro
de référence lié au produit recherché.
Référence pièce
|
|---|
| TAC-HSDXL5-90 |
| TAC-HSDXL7-60 |
| TAC-HSDXL9-100 |
| TAC-HSDXL9-140 |
| TAC-HSDXL10-60 |
| Référence pièce |
Prix unitaire standard
| Quantité minimale de commande | Remise sur volume | Hole diameter (drill diameter) D (mm) | Groove Length L (mm) | Overall Length L (mm) | With/without Oil Hole | Shank Diameter d | Diameter Tolerance | Tolerance of Shank Diameter | |
|---|---|---|---|---|---|---|---|---|---|---|---|
138.68 € | 1 | Disponible | 5 jours | 5 | 90 | 150 | Included | 5 | 0 ~ -0.018 | 0 ~ -0.008 | |
148.64 € | 1 | Disponible | 5 jours | 7 | 60 | 100 | Included | 7 | 0 ~ -0.022 | 0 ~ -0.009 | |
212.21 € | 1 | Disponible | 5 jours | 9 | 100 | 150 | Included | 9 | 0 ~ -0.022 | 0 ~ -0.009 | |
271.04 € | 1 | Disponible | 5 jours | 9 | 140 | 200 | Included | 9 | 0 ~ -0.022 | 0 ~ -0.009 | |
204.61 € | 1 | Disponible | 5 jours | 10 | 60 | 100 | Included | 10 | 0 ~ -0.022 | 0 ~ -0.009 |
Loading...
Spécifications
| Model Number | Groove Length ℓ | Overall Length L | |
| Diameter D | |||
| TAC-SDXL | 3 | 60 | 100 |
| 3 | 90 | 150 | |
| 4 | 60 | 100 | |
| 4 | 90 | 150 | |
| 4 | 120 | 200 | |
| 5 | 60 | 100 | |
| 5 | 90 | 150 | |
| 5 | 120 | 200 | |
| 6 | 60 | 100 | |
| 6 | 90 | 150 | |
| 6 | 120 | 200 | |
| 7 | 60 | 100 | |
| 7 | 90 | 150 | |
| 7 | 120 | 200 | |
| 8 | 60 | 100 | |
| 8 | 100 | 150 | |
| 8 | 140 | 200 | |
| 9 | 60 | 100 | |
| 9 | 100 | 150 | |
| 9 | 140 | 200 | |
| 10 | 60 | 100 | |
| 10 | 100 | 150 | |
| 10 | 140 | 200 |
| Model Number | Groove Length ℓ | Overall Length L | |
| Diameter D | |||
| TAC-HSDXL | 3 | 60 | 100 |
| 3 | 90 | 150 | |
3 | 120 | 200 | |
| 4 | 60 | 100 | |
| 4 | 90 | 150 | |
| 4 | 120 | 200 | |
| 5 | 60 | 100 | |
| 5 | 90 | 150 | |
| 5 | 120 | 200 | |
| 6 | 60 | 100 | |
| 6 | 90 | 150 | |
| 6 | 120 | 200 | |
| 7 | 60 | 100 | |
| 7 | 90 | 150 | |
| 7 | 120 | 200 | |
| 8 | 60 | 100 | |
| 8 | 100 | 150 | |
| 8 | 140 | 200 | |
| 9 | 60 | 100 | |
| 9 | 100 | 150 | |
| 9 | 140 | 200 | |
| 10 | 60 | 100 | |
| 10 | 100 | 150 | |
| 10 | 140 | 200 |
For Cutting Conditions, Refer to >>Click here.
Plus d'informations
● The discharge of cutting chips is promoted using a special drill groove shape.
● Non-step drilling is possible up to depths of 15 times the diameter, significantly improving the efficiency of drilling deep holes.
● Using a combination of ultrafine particulate carbide + TiAℓN coating, it has superior wear resistance that allows for high-speed machining.
Informations de base
| work material | General Steel / Heat-Treated Steel / Fonte / Aluminium / Cuivre | Tool Material Type | Carbure | Shank Type | Straight Shank |
|---|---|---|---|---|---|
| Coating Y/N | Included | Coating Type | TiAlN | Point Angle(°) | 130 |
| Thinning | Included |
Configurer
Propriétés de base
-
Hole diameter (drill diameter) D(mm)
-
Groove Length L(mm)
-
Overall Length L(mm)
-
Type
- TAC-HSDXL
- TAC-SDXL
-
With/without Oil Hole
- Included
- None
Filtrer par jours d'expédition standard
-
- Tous les articles
- 5 jours ou moins
- 9 jours ou moins
Propriétés optionnelles
- Les spécifications et les dimensions de certaines pièces peuvent ne pas être intégralement indiquées. Pour plus de détails, reportez-vous aux catalogues des fabricants .
Assistance technique
Mode de paiement
Fabrication à la demande
Certificats
Copyright © MISUMI Corporation All Rights Reserved.