TiAlN Coated Carbide Drill for Cast Iron Machining, 3-Flute / Regular
- Remise sur volume
Référence pièce
Vous pouvez trouver ici le numéro
de référence lié au produit recherché.
Référence pièce
|
|---|
| TAC-FCESD3R5 |
| TAC-FCESD3R6 |
| TAC-FCESD3R6.5 |
| TAC-FCESD3R6.8 |
| TAC-FCESD3R7 |
| TAC-FCESD3R8.5 |
| TAC-FCESD3R10 |
| TAC-FCESD3R12 |
| Référence pièce |
Prix unitaire standard
| Quantité minimale de commande | Remise sur volume | Hole diameter (drill diameter) D (mm) | Groove Length L (mm) | Overall Length L (mm) | Shank Diameter d | Diameter Tolerance | Tolerance of Shank Diameter | |
|---|---|---|---|---|---|---|---|---|---|---|
72.95 € | 1 | Disponible | 5 jours | 5 | 44 | 82 | 6 | +0.016 ~ +0.004 | 0 ~ -0.008 | |
78.32 € | 1 | Disponible | 5 jours | 6 | 44 | 82 | 6 | +0.016 ~ +0.004 | 0 ~ -0.008 | |
99.95 € | 1 | Disponible | 5 jours | 6.5 | 53 | 91 | 8 | +0.021 ~ +0.006 | 0 ~ -0.009 | |
103.95 € | 1 | Disponible | 5 jours | 6.8 | 53 | 91 | 8 | +0.021 ~ +0.006 | 0 ~ -0.009 | |
99.47 € | 1 | Disponible | 5 jours | 7 | 53 | 91 | 8 | +0.021 ~ +0.006 | 0 ~ -0.009 | |
124.99 € | 1 | Disponible | 5 jours | 8.5 | 61 | 103 | 10 | +0.021 ~ +0.006 | 0 ~ -0.009 | |
114.29 € | 1 | Disponible | 5 jours | 10 | 61 | 103 | 10 | +0.021 ~ +0.006 | 0 ~ -0.009 | |
185.20 € | 1 | Disponible | 5 jours | 12 | 71 | 118 | 12 | +0.025 ~ +0.007 | 0 ~ -0.011 |
Loading...
Spécifications
| Model Number | Groove Length ℓ | Overall Length L | Shank Diameter d | |
| Diameter D | ||||
| TAC-FCESD3R | 5 | 44 | 82 | 6 |
| 6 | 44 | 82 | 6 | |
| 6.5 | 53 | 91 | 8 | |
| 6.8 | 53 | 91 | 8 | |
| 7 | 53 | 91 | 8 | |
| 8 | 53 | 91 | 8 | |
| 8.5 | 61 | 103 | 10 | |
| 9 | 61 | 103 | 10 | |
| 10 | 61 | 103 | 10 | |
| 10.3 | 71 | 118 | 12 | |
| 12 | 71 | 118 | 12 | |
| 13 | 77 | 124 | 14 |
For Cutting Conditions, Refer to >>Click here.
Plus d'informations
● Its specialized form means that it exhibits superior cutting performance with gray cast iron and ductile cast iron, as well as non-ferrous metals such as aluminum alloy, brass, magnesium, etc.
● Drilling can be done without centering by using a spiral-pointed shape for the tip chisel portion.
● The discharge of cutting chips is promoted using a groove with a wide design.
[ ! ]Refer to page 759 for information about the advantages of a diameter plus tolerance.
Informations de base
| work material | Fonte / Aluminium / Cuivre | Tool Material Type | Carbure | Shank Type | Tige de fraise |
|---|---|---|---|---|---|
| Coating Y/N | Included | Coating Type | TiAlN | With/without Oil Hole | None |
| Point Angle(°) | 130 | Thinning | Included |
Configurer
Propriétés de base
-
Hole diameter (drill diameter) D(mm)
-
Groove Length L(mm)
-
Overall Length L(mm)
-
Type
- TAC-FCESD3R
Filtrer par jours d'expédition standard
-
- Tous les articles
- 5 jours ou moins
Propriétés optionnelles
- Les spécifications et les dimensions de certaines pièces peuvent ne pas être intégralement indiquées. Pour plus de détails, reportez-vous aux catalogues des fabricants .
Assistance technique
Mode de paiement
Fabrication à la demande
Certificats
Copyright © MISUMI Corporation All Rights Reserved.