Carbide Stepped Drill, for Drilling Pilot Holes for Screws, with Chamfering Blade, Size Designation Model
Cliquez sur cette image pour l'agrandir.
Cliquez sur cette image pour l'agrandir.
The desired stepped drill can be ordered without a drawing. Delivered in a short delivery time
Référence pièce
Vous pouvez trouver ici le numéro
de référence lié au produit recherché.
Référence pièce
|
|---|
| C-SC-TSDR3-[2.2-2.99/0.01]-[5-13/1]-[60,90,120] |
| C-SC-TSDR4-[3-3.89/0.01]-[5-18/0.1]-[60,90,120] |
| C-SC-TSDR5-[3.9-4.69/0.01]-[8-23/1]-[60,90,120] |
| C-SC-TSDR6-[4.7-6.49/0.01]-[10-28/0.1]-[60,90,120] |
| C-SC-TSDR8-[6.5-8.19/0.01]-[15-35/0.1]-[60,90,120] |
| C-SC-TSDR10-[8.2-9.99/0.01]-[15-45/0.1]-[60,90,120] |
| C-SC-TSDR12-[10-11/0.01]-[20-50/1]-[60,90,120] |
| Référence pièce |
Prix unitaire standard
| Quantité minimale de commande | Remise sur volume | M Model (M) | Chamfer Angle (Double Angle θ) (°) | Stepped Length (ℓ) (mm) | Tip Diameter (D) (mm) | Shank Diameter d | Tolerance of Shank Diameter | Major Diameter D1 (φ) | ℓ1 (mm) | Groove Length L1 (mm) | |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
- | 1 | 12 jours | 3 | 60 ～ 120 | 5 ～ 13 | 2.2 ～ 2.99 | 4 | 0 ~ -0.008 | 4 | 50 | Step Length + 8 | ||
- | 1 | 12 jours | 4 | 60 ～ 120 | 5 ～ 18 | 3 ～ 3.89 | 6 | 0 ~ -0.008 | 6 | 59 | Step Length + 13 | ||
- | 1 | 12 jours | 5 | 60 ～ 120 | 8 ～ 23 | 3.9 ～ 4.69 | 8 | 0 ~ -0.009 | 8 | 61 | Step Length + 16 | ||
- | 1 | 12 jours | 6 | 60 ～ 120 | 10 ～ 28 | 4.7 ～ 6.49 | 8 | 0 ~ -0.009 | 8 | 62 | Step Length + 18 | ||
- | 1 | 12 jours | 8 | 60 ～ 120 | 15 ～ 35 | 6.5 ～ 8.19 | 10 | 0 ~ -0.009 | 10 | 69 | Step Length + 24 | ||
- | 1 | 12 jours | 10 | 60 ～ 120 | 15 ～ 45 | 8.2 ～ 9.99 | 12 | 0 ~ -0.011 | 12 | 77 | Step Length + 30 | ||
- | 1 | 12 jours | 12 | 60 ～ 120 | 20 ～ 50 | 10 ～ 11 | 14 | 0 ~ -0.011 | 14 | 86 | Step Length + 36 |
Loading...
Spécifications
| Model Number | Tip Diameter D 0.01 mm Increment Designation | Step Length ℓ 1 mm Increment Designation | Chamfer Angles Double Angle θ (Selection) | Large Diameter D1 | ℓ1 | Groove Length L1 | Overall Length L | Shank Diameter d | |
| Nominal M | |||||||||
| C-SC-TSDR | 3 | 2.20 ~2.99 | 5 ~ 13 | 4 | 50 | ℓ+8 | ℓ+ℓ1 | 4 | |
| 4 | 3.00 ~3.89 | 5 ~ 18 | 6 | 59 | ℓ+13 | 6 | |||
| 5 | 3.90 ~4.69 | 8 ~ 23 | 60 | 8 | 61 | ℓ+16 | 8 | ||
| 6 | 4.70 ~6.49 | 10 ~ 28 | 90 | 8 | 62 | ℓ+18 | 8 | ||
| 8 | 6.50 ~8.19 | 15 ~ 35 | 120 | 10 | 69 | ℓ+24 | 10 | ||
| 10 | 8.20 ~9.99 | 15 ~ 45 | 12 | 77 | ℓ+30 | 12 | |||
| 12 | 10.00 ~ 11.00 | 20 ~ 50 | 14 | 86 | ℓ+36 | 14 |
For Cutting Conditions, Refer to >>Click here.
Plus d'informations
● Pilot holes for M3-M12 metric coarse thread (boring / chamfering) can be done in a single step to realize a high-efficiency process.
● Since the tip diameter, step length, and chamfering angle can all be chosen freely, the tool shape can be manufactured as you like.
Modifications
| Additional Processing Details | Code | Details |
| TS Coating | TS |  With TS Coating |
| TiAℓN Coat | TA | TiAℓN with Coating |
Informations de base
| work material | General Steel / Heat-Treated Steel / Acier inoxydable / Fonte / Aluminium / Cuivre | Tool Material Type | Carbure | Shank Type | Straight Shank |
|---|---|---|---|---|---|
| Coating Y/N | None | With/without Oil Hole | None | Point Angle(°) | 140 |
| Thinning | Included | Diameter Tolerance | h8 |
Configurer
Propriétés de base
-
M Model(M)
- 3
- 4
- 5
- 6
- 8
- 10
- 12
-
Chamfer Angle (Double Angle θ)(°)
-
Stepped Length (ℓ)(mm)
-
Tip Diameter (D)(mm)
-
Type
- C-SC-TSDR
Filtrer par jours d'expédition standard
-
- Tous les articles
- 12 jours ou moins
Propriétés optionnelles
- Les spécifications et les dimensions de certaines pièces peuvent ne pas être intégralement indiquées. Pour plus de détails, reportez-vous aux catalogues des fabricants .
Assistance technique
Mode de paiement
Fabrication à la demande
Certificats
Copyright © MISUMI Corporation All Rights Reserved.