TiAlN Coated Powdered High-Speed Steel Drill, End Mill Shank / Regular Model (Numéros de référence)
- Remise sur volume
Référence pièce
Vous pouvez trouver ici le numéro
de référence lié au produit recherché.
Référence pièce
|
|---|
| APM-HESDR6.5 |
| APM-HESDR6.7 |
| APM-HESDR7 |
| APM-HESDR7.8 |
| APM-HESDR8.7 |
| APM-HESDR11.5 |
| Référence pièce |
Prix unitaire standard
| Quantité minimale de commande | Remise sur volume | Hole diameter (drill diameter) D (mm) | Groove Length L (mm) | Overall Length L (mm) | With/without Oil Hole | Shank Diameter d | Diameter Tolerance | Tolerance of Shank Diameter | |
|---|---|---|---|---|---|---|---|---|---|---|---|
137.05 € | 1 | Disponible | 5 jours | 6.5 | 63 | 107 | Included | 8 | 0 ~ -0.022 | 0 ~ -0.022 | |
148.50 € | 1 | Disponible | 5 jours | 6.7 | 63 | 107 | Included | 8 | 0 ~ -0.022 | 0 ~ -0.022 | |
149.52 € | 1 | Disponible | 5 jours | 7 | 69 | 113 | Included | 8 | 0 ~ -0.022 | 0 ~ -0.022 | |
141.09 € | 1 | Disponible | 5 jours | 7.8 | 75 | 119 | Included | 8 | 0 ~ -0.022 | 0 ~ -0.022 | |
146.77 € | 1 | Disponible | 5 jours | 8.7 | 81 | 131 | Included | 10 | 0 ~ -0.022 | 0 ~ -0.022 | |
148.78 € | 1 | Disponible | 5 jours | 11.5 | 94 | 151 | Included | 12 | 0 ~ -0.027 | 0 ~ -0.027 |
Loading...
Spécifications
Model Number
APM-ESDR (No oil hole) / APM-HESDR (With oil hole)
| Diameter D | Groove Length ℓ | Overall Length L | Shank Diameter d |
| 2 | 24 | 56 | 3 |
| 2.5 | 30 | 62 | 3 |
| 3 | 33 | 65 | 3 |
| 3.3 | 36 | 68 | 4 |
| 3.5 | 39 | 71 | 4 |
| 3.8 | 43 | 75 | 4 |
| 4 | 43 | 75 | 4 |
| 4.2 | 43 | 87 | 6 |
| 4.3 | 47 | 91 | 6 |
| 4.5 | 47 | 91 | 6 |
| 4.8 | 52 | 96 | 6 |
| 5 | 52 | 96 | 6 |
| 5.1 | 52 | 96 | 6 |
| 5.5 | 57 | 101 | 6 |
| 6 | 57 | 101 | 6 |
| 6.5 | 63 | 107 | 8 |
| 6.7 | 63 | 107 | 8 |
| 6.8 | 69 | 113 | 8 |
| 6.9 | 69 | 113 | 8 |
| 7 | 69 | 113 | 8 |
| 7.8 | 75 | 119 | 8 |
| 8 | 75 | 119 | 8 |
| 8.1 | 75 | 125 | 10 |
| 8.2 | 75 | 125 | 10 |
| 8.5 | 75 | 125 | 10 |
| 8.6 | 81 | 131 | 10 |
| 8.7 | 81 | 131 | 10 |
| 9 | 81 | 131 | 10 |
| 9.5 | 81 | 131 | 10 |
| 9.8 | 87 | 137 | 10 |
| 10 | 87 | 137 | 10 |
| 10.2 | 87 | 144 | 12 |
| 10.3 | 87 | 144 | 12 |
| 10.4 | 87 | 144 | 12 |
| 10.5 | 87 | 144 | 12 |
| 11 | 94 | 151 | 12 |
| 11.5 | 94 | 151 | 12 |
| 12 | 101 | 158 | 12 |
| 12.5 | 101 | 161 | 14 |
| 13 | 101 | 161 | 14 |
For Cutting Conditions, Refer to >>Click here.
Plus d'informations
●A drill with a good balance between wear resistance and fracture toughness due to a combination of high-speed steel powder + TiAℓN coating.
●Deep holes can now be drilled very efficiently thanks to a special drill geometry.
Informations de base
| work material | General Steel / Heat-Treated Steel / Acier inoxydable / Fonte / Aluminium / Cuivre | Tool Material Type | Powdered High-Speed Steel | Shank Type | Tige de fraise |
|---|---|---|---|---|---|
| Coating Y/N | Included | Coating Type | TiAlN | Point Angle(°) | 130 |
| Thinning | Included |
Configurer
Propriétés de base
-
Hole diameter (drill diameter) D(mm)
-
Groove Length L(mm)
-
Overall Length L(mm)
-
Type
- APM-ESDR
- APM-HESDR
-
With/without Oil Hole
- Included
- None
Filtrer par jours d'expédition standard
-
- Tous les articles
- 5 jours ou moins
Propriétés optionnelles
- Les spécifications et les dimensions de certaines pièces peuvent ne pas être intégralement indiquées. Pour plus de détails, reportez-vous aux catalogues des fabricants .
Assistance technique
Mode de paiement
Fabrication à la demande
Certificats
Copyright © MISUMI Corporation All Rights Reserved.