Straight Reamer with Carbide Bottom Blade, 2-Flute / 4-Flute, Regular / Corner Radius Model
Référence pièce
Vous pouvez trouver ici le numéro
de référence lié au produit recherché.
| Référence pièce | Quantité minimale de commande | Remise sur volume | Tool Diameter (mm) | Groove Length (mm) | No. | Bottom Blade Shape | Diameter Tolerance (mm) | Shank Diameter d (mm) | Number of Flutes (Sheet(s)) | Overall Length L (mm) | Neck Length (ℓ1) (mm) | Number of Flutes | Radius (R) (mm) | Length Under Neck ℓ2 | |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| 1 | 8 jours | 0.4 ～ 2.995 | 0.5 ～ 15 | 3 | F (Flat) / T (Center Dented) | 0 ~ 0.003 | 3 | 2 | 40 | - | 2 | 0.1 ～ 1.39 | - | ||
| 1 | 8 jours | 2.005 ～ 3.995 | 0.5 ～ 20 | 4 | F (Flat) / T (Center Dented) | 0 ~ 0.003 | 4 | 2 | 50 | - | 2 | 0.1 ～ 1.89 | - | ||
| 1 | 8 jours | 3.005 ～ 5.995 | 3 ～ 24 | 6 | F (Flat) / T (Center Dented) | 0 ~ 0.003 | 6 | 4 | 60 | - | 2 ～ 4 | 0.1 ～ 2.8 | - | ||
| 1 | 8 jours | 2 ～ 2.995 | 0.5 ～ 15 | 3 | F (Flat) / T (Center Dented) | 0 ~ 0.003 | 3 | 2 | 40 | 5 ～ 20 | 2 | 0.1 ～ 1.39 | ℓ + ℓ1 ≦ 20 | ||
| 1 | 8 jours | 2 ～ 3.995 | 0.5 ～ 20 | 4 | F (Flat) / T (Center Dented) | 0 ~ 0.003 | 4 | 2 | 50 | 5 ～ 20 | 2 | 0.1 ～ 1.89 | ℓ + ℓ1 ≦ 25 | ||
| 1 | 8 jours | 3.005 ～ 5.995 | 3 ～ 24 | 6 | F (Flat) / T (Center Dented) | 0 ~ 0.003 | 6 | 4 | 60 | 5 ～ 20 | 2 ～ 4 | 0.1 ～ 2.89 | ℓ + ℓ1 ≦ 35 | ||
| 1 | 8 jours | 0.4 ～ 2.995 | 0.5 ～ 15 | 3 | F (Flat) / T (Center Dented) | 0 ~ 0.005 | 3 | 2 | 40 | - | 2 | 0.1 ～ 1.39 | - | ||
| 1 | 8 jours | 2.005 ～ 3.995 | 0.5 ～ 20 | 4 | F (Flat) / T (Center Dented) | 0 ~ 0.005 | 4 | 2 | 50 | - | 2 | 0.1 ～ 1.89 | - | ||
| 1 | 7 jours | 3.005 ～ 5.995 | 3 ～ 24 | 6 | F (Flat) / T (Center Dented) | 0 ~ 0.005 | 6 | 4 | 60 | - | 2 ～ 4 | 0.1 ～ 2.8 | - | ||
| 1 | 7 jours | 4.005 ～ 7.995 | 4 ～ 28 | 8 | F (Flat) / T (Center Dented) | 0 ~ 0.005 | 8 | 4 | 60 | - | 2 ～ 4 | 0.1 ～ 3.8 | - | ||
| 1 | 7 jours | 6.005 ～ 9.995 | 5 ～ 35 | 10 | F (Flat) / T (Center Dented) | 0 ~ 0.005 | 10 | 4 | 80 | - | 2 ～ 4 | 0.1 ～ 4.8 | - | ||
| 1 | 7 jours | 8.005 ～ 11.995 | 6 ～ 36 | 12 | F (Flat) / T (Center Dented) | 0 ~ 0.005 | 12 | 4 | 80 | - | 2 ～ 4 | 0.1 ～ 5.8 | - | ||
| 1 | 7 jours | 10.005 ～ 15.995 | 8 ～ 48 | 16 | F (Flat) / T (Center Dented) | 0 ~ 0.005 | 16 | 4 | 100 | - | 2 ～ 4 | 0.1 ～ 7.8 | - | ||
| 1 | 8 jours | 2 ～ 2.995 | 0.5 ～ 15 | 3 | F (Flat) / T (Center Dented) | 0 ~ 0.005 | 3 | 2 | 40 | 5 ～ 20 | 2 | 0.1 ～ 1.39 | ℓ + ℓ1 ≦ 20 | ||
| 1 | 8 jours | 2 ～ 3.995 | 0.5 ～ 20 | 4 | F (Flat) / T (Center Dented) | 0 ~ 0.005 | 4 | 2 | 50 | 5 ～ 20 | 2 | 0.1 ～ 1.89 | ℓ + ℓ1 ≦ 25 | ||
| 1 | 8 jours | 2 ～ 3.995 | 0.5 ～ 20 | 4 | T (Center Dented) | 0 ~ 0.005 | 4 | 2 | 50 | - | 2 | 0.1 ～ 1.89 | ℓ + ℓ1 ≦ 25 | ||
| 1 | 8 jours | 3.005 ～ 5.995 | 3 ～ 24 | 6 | F (Flat) / T (Center Dented) | 0 ~ 0.005 | 6 | 4 | 60 | 5 ～ 20 | 2 ～ 4 | 0.1 ～ 2.89 | ℓ + ℓ1 ≦ 35 |
Loading...
Spécifications
| Model Number | Number of Flutes (Selection) | Flute Diameter D 0.005 mm Increment Designation | Radius R 0.01 mm Increment Designation | Blade Length ℓ 0.5 mm Increment Designation | Bottom Blade Shape (Selection) | Overall Length L | Shank Diameter d | |
| No. | ||||||||
| SEC-RMSRC SEC-HP-RMSRC (No.3 ~ No.6 only can be designated) | 3 | 2 | 0.400 ~ 0.495 | 0.10 ≤ R ≤ (D-0.2) / 2 | 0.5 ~ 1.0 | T (Dished) F (Flat) >>P.994 | 40 | 3 |
| 3 | 2 | 0.500 ~ 1.500 | 0.5 ~ 5.0 | 40 | 3 | |||
| 3 | 2 | 1.505 ~ 2.000 | 0.5 ~ 10.0 | 40 | 3 | |||
| 3 | 2 | 2.005 ~ 2.995 | 0.5 ~ 15.0 | 40 | 3 | |||
| 4 | 2 | 2.005 ~ 3.995 | 0.5 ~ 20.0 | 50 | 4 | |||
| 6 | 2 4 | 3.005 ~ 5.995 | 3.0 ~ 24.0 | 60 | 6 | |||
| 8 | 4.005 ~ 7.995 | 4.0 ~ 28.0 | 60 | 8 | ||||
| 10 | 6.005 ~ 9.995 | 5.0 ~ 35.0 | 80 | 10 | ||||
| 12 | 8.005 ~ 11.995 | 6.0 ~ 36.0 | 80 | 12 | ||||
| 16 | 10.005 ~ 15.995 | 8.0 ~ 48.0 | 100 | 16 |
| Model Number | Number of Flutes (Selection) | Flute Diameter D 0.005 mm Increment Designation | Radius R 0.01 mm Increment Designation | Blade Length ℓ 0.5 mm Increment Designation | Neck Length ℓ1 1 mm Increment Designation | Bottom Blade Shape (Selection) | Length Under Neck Specified Range ℓ2 | Overall Length L | Shank Diameter d | |
| No. | ||||||||||
| SEC-RMSRCZ SEC-HP-RMSRCZ | 3 | 2 | 2.000 ~ 2.995 | 0.10 ≤ R ≤ (D-0.2) / 2 | 0.5 ~ 15.0 | 5 ≤ ℓ1 ≤ 20 | T (Dished) F (Flat) | ℓ + ℓ1 ≤ 20 | 40 | 3 |
| 4 | 2 | 2.000 ~ 3.995 | 0.5 ~ 20.0 | ℓ + ℓ1 ≤ 25 | 50 | 4 | ||||
| 6 | 2 4 | 3.005 ~ 5.995 | 3.0 ~ 24.0 | ℓ + ℓ1 ≤ 35 | 60 | 6 |
For Cutting Conditions, Refer to >>Click here.
Modifications
| Model Number | Coating Addition |
| SEC-RMSRC | ○ |
| SEC-RMSRCZ | ○ |
| SEC-HP-RMSRC | - |
| SEC-HP-RMSRCZ | - |
Coating
How to Order / Charge Details >>Click here.
Informations de base
| Shank type | Tige de fraise | Work Material | General Steel / Heat-Treated Steel / Acier inoxydable / Fonte / Aluminium / Cuivre | Coating Presence | None |
|---|---|---|---|---|---|
| Groove Shape | Droit | Base-Blade Availability | Included | Tool Material Type | Carbide |
Configurer
Propriétés de base
-
Tool Diameter(mm)
-
Groove Length(mm)
-
No.
- 3
- 4
- 6
- 8
- 10
- 12
- 16
-
Bottom Blade Shape
- F (Flat)
- T (Center Dented)
-
Diameter Tolerance(mm)
-
Shank Diameter d(mm)
-
Number of Flutes(Sheet(s))
- 2
- 4
-
Overall Length L(mm)
-
Neck Length (ℓ1)(mm)
-
Number of Flutes
-
Radius (R)(mm)
-
Type
- SEC-HP-RMSRC
- SEC-HP-RMSRCZ
- SEC-RMSRC
- SEC-RMSRCZ
Filtrer par jours d'expédition standard
-
- Tous les articles
- 7 jours ou moins
- 8 jours ou moins
Propriétés optionnelles
- Les spécifications et les dimensions de certaines pièces peuvent ne pas être intégralement indiquées. Pour plus de détails, reportez-vous aux catalogues des fabricants .
Assistance technique
Mode de paiement
Fabrication à la demande
Certificats
Copyright © MISUMI Corporation All Rights Reserved.