Carbide Straight Reamer, Long Model
Référence pièce
Vous pouvez trouver ici le numéro
de référence lié au produit recherché.
| Référence pièce | Quantité minimale de commande | Remise sur volume | Tool Diameter (mm) | Groove Length (mm) | No. | Diameter Tolerance (mm) | Shank Diameter d (mm) | Number of Flutes (Sheet(s)) | Overall Length L (mm) | Neck Length (ℓ1) (mm) | Length Under Neck ℓ2 | Chamfer Length T | |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| 1 | 8 jours | 0.3 ～ 2.99 | 0.5 ～ 15 | 3 | 0 ~ 0.005 | 3 | 2 | 60 | - | - | - | ||
| 1 | 8 jours | 3 ～ 3.99 | 0.5 ～ 30 | 4 | 0 ~ 0.005 | 4 | 4 | 80 | - | - | - | ||
| 1 | 8 jours | 3 ～ 5.99 | 3 ～ 34 | 6 | 0 ~ 0.005 | 6 | 4 | 100 | - | - | - | ||
| 1 | 8 jours | 0.3 ～ 2.99 | 0.5 ～ 15 | 3 | 0 ~ 0.003 | 3 | 2 | 60 | - | - | - | ||
| 1 | 8 jours | 3 ～ 3.99 | 0.5 ～ 30 | 4 | 0 ~ 0.003 | 4 | 4 | 80 | - | - | - | ||
| 1 | 8 jours | 3 ～ 5.99 | 3 ～ 34 | 6 | 0 ~ 0.003 | 6 | 4 | 100 | - | - | - | ||
| 1 | 8 jours | 2 ～ 2.99 | 0.5 ～ 15 | 3 | 0 ~ 0.005 | 3 | 2 | 60 | 5 ～ 45 | ℓ + ℓ1 ≦ 20 | 0.5 | ||
| 1 | 8 jours | 3 ～ 3.99 | 0.5 ～ 20 | 4 | 0 ~ 0.005 | 4 | 4 | 80 | 5 ～ 45 | ℓ + ℓ1 ≦ 50 | 0.5 | ||
| 1 | 8 jours | 3 ～ 5.99 | 3 ～ 34 | 6 | 0 ~ 0.005 | 6 | 4 | 100 | 5 ～ 45 | ℓ + ℓ1 ≦ 70 | 0.8 | ||
| 1 | 8 jours | 2 ～ 2.99 | 0.5 ～ 15 | 3 | 0 ~ 0.003 | 3 | 2 | 60 | 5 ～ 45 | ℓ + ℓ1 ≦ 20 | 0.5 | ||
| 1 | 8 jours | 3 ～ 3.99 | 0.5 ～ 20 | 4 | 0 ~ 0.003 | 4 | 4 | 80 | 5 ～ 45 | ℓ + ℓ1 ≦ 50 | 0.5 | ||
| 1 | 8 jours | 3 ～ 5.99 | 3 ～ 34 | 6 | 0 ~ 0.003 | 6 | 4 | 100 | 5 ～ 45 | ℓ + ℓ1 ≦ 70 | 0.8 |
Loading...
Spécifications
| Model Number | Flute Diameter D 0.01 mm Increment Designation | Blade Length ℓ 0.5 mm Increment Designation | Chamfer Length T | Overall Length L | Shank Diameter d | Number of Flutes | |
| No. | |||||||
| CHRL CHRL-HP | 3 | 0.30 ~ 0.49 | 0.5 - 1.0 | 0.1 | 60 | 3 | 2 |
| 3 | 0.50 ~ 1.00 | 0.5 - 5.0 | 0.1 | 60 | 3 | 2 | |
| 3 | 1.01 ~ 1.50 | 0.5 - 5.0 | 0.2 | 60 | 3 | 2 | |
| 3 | 1.51 ~ 2.00 | 0.5 ~ 10.0 | 0.5 | 60 | 3 | 2 | |
| 3 | 2.01 ~ 2.99 | 0.5 ~ 15.0 | 0.5 | 60 | 3 | 2 | |
| 4 | 3.00 ~ 3.99 | 0.5 ~ 30.0 | 0.5 | 80 | 4 | 4 | |
| 6 | 3.00 ~ 5.99 | 3.0 ~ 34.0 | 0.8 | 100 | 6 | 4 |
| Model Number | Flute Diameter D 0.01 mm Increment Designation | Blade Length ℓ 0.5 mm Increment Designation | Neck Length ℓ1 1 mm Increment Designation | Length Under Neck Specified Range ℓ2 | Chamfer Length T | Overall Length L | Shank Diameter d | Number of Flutes | |
| No. | |||||||||
| CHRLZ CHRLZ-HP | 3 | 2.00 ~ 2.99 | 0.5 ~ 15.0 | 5 ≤ ℓ1 ≤ 45 | ℓ + ℓ1 ≤ 20 | 0.5 | 60 | 3 | 2 |
| 4 | 3.00 ~ 3.99 | 0.5 ~ 20.0 | ℓ + ℓ1 ≤ 50 | 0.5 | 80 | 4 | 4 | ||
| 6 | 3.00 ~ 5.99 | 3.0 ~ 34.0 | ℓ + ℓ1 ≤ 70 | 0.8 | 100 | 6 | 4 |
For Cutting Conditions, Refer to >>Click here.
Modifications
| Model Number | Coating Addition |
| CHRL | ○ |
| CHRLZ | ○ |
| CHRL-HP | - |
| CHRLZ-HP | - |
Informations de base
| Shank type | Tige de fraise | Work Material | General Steel / Heat-Treated Steel / Acier inoxydable / Fonte / Aluminium / Cuivre | Coating Presence | None |
|---|---|---|---|---|---|
| Groove Shape | Droit | Base-Blade Availability | None | Tool Material Type | Carbide |
Configurer
Propriétés de base
-
Tool Diameter(mm)
-
Groove Length(mm)
-
No.
- 3
- 4
- 6
-
Diameter Tolerance(mm)
-
Shank Diameter d(mm)
-
Number of Flutes(Sheet(s))
- 2
- 4
-
Overall Length L(mm)
-
Neck Length (ℓ1)(mm)
-
Type
- CHRL
- CHRL-HP
- CHRLZ
- CHRLZ-HP
Filtrer par jours d'expédition standard
-
- Tous les articles
- 8 jours ou moins
Propriétés optionnelles
- Les spécifications et les dimensions de certaines pièces peuvent ne pas être intégralement indiquées. Pour plus de détails, reportez-vous aux catalogues des fabricants .
Assistance technique
Mode de paiement
Fabrication à la demande
Certificats
Copyright © MISUMI Corporation All Rights Reserved.