TiN Coated High-Speed Steel Roll Tap【5 pièces par conditionnement】
Référence pièce
Vous pouvez trouver ici le numéro
de référence lié au produit recherché.
Référence pièce
|
|---|
| G-ROT-M10-1.5-2 |
| G-ROT-M10-1.5-4 |
| Référence pièce |
Prix unitaire standard
| Nombre de pièce(s) incluse(s) dans le conditionnement | Quantité minimale de commande | Remise sur volume | Nominal | Pitch, Number of Threads (mm) | Number of Chamfered Threads | Overall Length (L) (mm) | Thread Length | Shank Diameter (φ) | Length Under Neck (mm) | Precision | Square Part Length (mm) | Square Part Width (mm) | |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
113.37 € | 5 pièces par conditionnement | 1 paquet | 5 jours | M10 | 1.5 | 2 P | 75 | 24 | 7 | 39 | RM7 | 8 | 5.5 | ||
113.37 € | 5 pièces par conditionnement | 1 paquet | 5 jours | M10 | 1.5 | 4 P | 75 | 24 | 7 | 39 | RM7 | 8 | 5.5 |
Loading...
Spécifications
Model Number
G-ROT
1 Pack 5 Pieces Included
| Nominal M x P |
Chamfer Lcf (Selection) |
Precision | Overall Length L |
Thread Length Lc |
Length Under Neck L1 |
Shank Diameter d |
Square Part Length Lk |
Square Part Width K |
Quantity/ pack |
|
| M2 | 0.4 | 4 | RM4 | 40 | 9 | - | 3. | 5 | 2.5 | 5 Pieces |
| M3 | 0.5 | 2 4 |
RM5 | 46 | 9 | 18 | 4. | 6 | 3.2 | |
| M4 | 0.7 | RM6 | 52 | 10 | 20 | 5. | 7 | 4. | ||
| M5 | 0.8 | RM6 | 60 | 11 | 22 | 5.5 | 7 | 4.5 | ||
| M6 | 1 | RM7 | 62 | 12 | 24 | 6. | 7 | 4.5 | ||
| M8 | 1.25 | RM7 | 70 | 22 | 35 | 6.2 | 8 | 5. | ||
| M10 | 1.5 | RM7 | 75 | 24 | 39 | 7. | 8 | 5.5 | ||
[ ! ]This product is only sold in units of packs.
[ ! ]M6 or below (depth of bite 4 only) have protruding centers.
[ ! ]The pilot hole diameter for a roll tap is different from that of a cutting tap.
[ ! ]For details about roll tapping accuracy RM, refer to the technical information (>>Click here).
For Cutting Conditions, Refer to >>Click here.
Plus d'informations
● It is used as a thread forming tap that does not discharge cuttings.
● Supports a wide range of work materials ranging from general steel to non-ferrous alloys.
● The TiN coating provides excellent wear resistance and welding resistance.
Informations de base
| Thread Types | Métrique | Tool Material Type | Acier rapide au vanadium | Work Material | Low-Carbon Steel (C Content of 0.25% or Less) / Medium-Carbon Steel (C Content 0.25 - 0.45%) / High-Carbon Steel (C Content Exceeding 0.45%) / Acier allié (SCM) / Stainless Steel (SUS) / Cuivre (Cu) / Laiton (Bs) / Brass Cast Iron (BsC) / Bronze (PB) / Rolled Aluminum Material (AL) |
|---|---|---|---|---|---|
| Tap Model | Rolled Tap | Bore Model | For Through Holes / For Blind Holes | Coating Presence | Included |
| Surface treatment | TiN | Quantity/Pack | 5 Piece |
Configurer
Propriétés de base
-
Pitch, Number of Threads(mm)
-
Number of Chamfered Threads
-
Overall Length (L)(mm)
-
Thread Length
-
Shank Diameter(φ)
-
Length Under Neck(mm)
-
Precision
-
Square Part Length(mm)
-
Square Part Width(mm)
-
Type
- G-ROT
-
Nominal
Filtrer par jours d'expédition standard
-
- Tous les articles
- 5 jours ou moins
Propriétés optionnelles
- Les spécifications et les dimensions de certaines pièces peuvent ne pas être intégralement indiquées. Pour plus de détails, reportez-vous aux catalogues des fabricants .
Assistance technique
Mode de paiement
Fabrication à la demande
Certificats
Copyright © MISUMI Corporation All Rights Reserved.