VAC Series Carbide Uneven Lead End Mill for Difficult-to-Cut Materials (Regular Model)
Référence pièce
Vous pouvez trouver ici le numéro
de référence lié au produit recherché.
Features of VAC Unequal Leads
Unequal Leads + Unequal Division = Suppressed Chatter Vibration!
Design with Features to Suppress Vibration with Readily Vibrating Objects
Clean surface finish of machined objects!
- [ What are unequal leads? ]
- By changing the twist angles of each cutting edge of the same end mill, attenuation of generated vibrations is encouraged which leads to suppressed chatter.
- [ What are unequal divisions? ]
- The periodicity of the tool vibrations when cutting are cancelled by making the divisions at the bottom of the blade unequal
| Processing Method | Side Milling | Work Material | SUS304 | Coolant | Water-Soluble |
|---|---|---|---|---|---|
| Number of revolutions | 4100min-1 | Feed | 430mm/min | Cut Volume | Ad:9mm Rd:0.3mm |
- [ Chatter Vibration Comparison ]
- Drastically reduced tool vibration by adopting unequal leads / unequal divisions. Capable of even more stable machining
●Work Material: for S45C (HRc20)
| Processing Method | Side Milling | Number of revolutions | 4700min-1 | Feed | 770mm/min | Cut Volume | Ad:9mm Rd:1.2mm |
|---|
●Work Material: for SUS304
| Processing Method | Side Milling | Number of revolutions | 4100min-1 | Feed | 430mm/min | Cut Volume | Ad:9mm Rd:1.2mm |
|---|
VAC Unequal Leads - Machining Test Results
VAC Unequal Lead End Mill (φ10) Cutting Example
| Work Material | SUS304 | Processing Method | Side Face Cutting | Coolant | Water-Soluble |
|---|---|---|---|---|---|
| Number of revolutions | 3183min-1 | Feed | 509mm/min | Cut Volume | Ad:10mm Rd:5mm |
| Référence pièce |
Prix unitaire standard
| Quantité minimale de commande | Remise sur volume | Outer Diameter (D) (φ) | Flute Length (ℓ) (mm) | Shank Diameter (d) (mm) | Overall Length (L) (mm) | Figure | |
|---|---|---|---|---|---|---|---|---|---|
21.35 € | 1 | Disponible | 5 jours | 3 | 8 | 6 | 57 | 1 | |
22.46 € | 1 | Disponible | 5 jours | 4 | 11 | 6 | 57 | 1 | |
23.97 € | 1 | Disponible | 5 jours | 5 | 13 | 6 | 57 | 1 | |
26.19 € | 1 | Disponible | 5 jours | 6 | 13 | 6 | 57 | 2 | |
37.14 € | 1 | Disponible | 5 jours | 8 | 19 | 8 | 63 | 2 | |
50.97 € | 1 | Disponible | 5 jours | 10 | 22 | 10 | 72 | 2 | |
63.86 € | 1 | Disponible | 5 jours | 12 | 26 | 12 | 83 | 2 | |
80.26 € | 1 | Disponible | 5 jours | 14 | 26 | 14 | 83 | 2 | |
117.30 € | 1 | Disponible | 5 jours | 16 | 32 | 16 | 92 | 2 | |
159.84 € | 1 | Disponible | 5 jours | 18 | 32 | 18 | 92 | 2 | |
170.48 € | 1 | Disponible | 5 jours | 20 | 38 | 20 | 104 | 2 | |
235.71 € | 1 | Disponible | 5 jours | 25 | 38 | 25 | 104 | 2 |
Loading...
Spécifications
Model Number
VAC-FMS-VHEM4R
| Model Number | Flute Length ℓ | Overall Length L | Shank Diameter d | Figure | |
| Flute Diameter D | |||||
| VAC-FMS-VHEM4R | 3 | 8 | 57 | 6 | 1 |
| 4 | 11 | 57 | 6 | 1 | |
| 5 | 13 | 57 | 6 | 1 | |
| 6 | 13 | 57 | 6 | 2 | |
| 8 | 19 | 63 | 8 | 2 | |
| 10 | 22 | 72 | 10 | 2 | |
| 12 | 26 | 83 | 12 | 2 | |
| 14 | 26 | 83 | 14 | 2 | |
| 16 | 32 | 92 | 16 | 2 | |
| 18 | 32 | 92 | 18 | 2 | |
| 20 | 38 | 104 | 20 | 2 | |
| 25 | 38 | 104 | 25 | 2 |
Exemple d'utilisation
● High efficiency machining can be realized by suppressing chattering through the use of "unequal lead."
● Smooth chip discharge is achieved using an optimum groove geometry.
[ ! ]The electrical conductivity is minimal.
Informations de base
| Work Material | General Steel / Heat-Treated Steel / Acier inoxydable / Fonte / Aluminum Alloy / Titanium Alloy / Copper Alloy | Number of Flutes(sheet) | 4 | Model | Carré |
|---|---|---|---|---|---|
| Processing Applications | Flat Surface / Side Surface / Rainure / Thrust (Z-Feed) / Inclined Cutting / Countersunk |
Configurer
Propriétés de base
-
Outer Diameter (D)(φ)
-
Flute Length (ℓ)(mm)
-
Shank Diameter (d)(mm)
-
Overall Length (L)(mm)
-
Type
- VAC-FMS-VHEM4R
Filtrer par jours d'expédition standard
-
- Tous les articles
- 5 jours ou moins
Propriétés optionnelles
- Les spécifications et les dimensions de certaines pièces peuvent ne pas être intégralement indiquées. Pour plus de détails, reportez-vous aux catalogues des fabricants .
Assistance technique
Mode de paiement
Fabrication à la demande
Certificats
Copyright © MISUMI Corporation All Rights Reserved.