Supports / FRN-P2 / FUJI LATEX
- En promotion jusqu’au 30/11/2024
- Remise sur volume
This option is a FRN-P2 series G1 gear dedicated rack gear.
[Features]
· Speed characteristics
· The torque of the rotary damper changes according to the rotation speed.
· In general, as shown in the figure on the right, the torque increases as the rotation speed increases, and decreases as the rotation speed decreases.
· Regarding the torque value of the catalog, 20rpm is the torque value at the time of rotation.
· In addition, the torque at startup is slightly different from the rated torque.
· Temperature characteristics
· The torque of the rotary damper varies according to the operating environment temperature.
· In general, as shown in the figure on the right, the torque decreases as the temperature rises, and rises as the temperature decreases.
· This is because the viscosity of the silicone oil inside the damper is affected by the temperature change, hence if the temperature returns to original, the torque returns to the original.
[Features]
· Speed characteristics
· The torque of the rotary damper changes according to the rotation speed.
· In general, as shown in the figure on the right, the torque increases as the rotation speed increases, and decreases as the rotation speed decreases.
· Regarding the torque value of the catalog, 20rpm is the torque value at the time of rotation.
· In addition, the torque at startup is slightly different from the rated torque.
· Temperature characteristics
· The torque of the rotary damper varies according to the operating environment temperature.
· In general, as shown in the figure on the right, the torque decreases as the temperature rises, and rises as the temperature decreases.
· This is because the viscosity of the silicone oil inside the damper is affected by the temperature change, hence if the temperature returns to original, the torque returns to the original.
Référence pièce
Vous pouvez trouver ici le numéro
de référence lié au produit recherché.
ROP-020P2-1
Informations de base
| Type du corps principal | Composants associés | Longueur L(mm) | 400 | Environnement de fonctionnement | Standard |
|---|---|---|---|---|---|
| Matériau du corps principal | Résine | Largeur l(mm) | 11.5 | Module d'engrenage | 1.5 |
| Nombre de dents d'engrenage | 85 |
Vous vous trouvez sur la page de Supports / FRN-P2 / FUJI LATEX, le numéro d'article est le suivant: ROP-020P2-1.
Veuillez trouver plus de détails concernant les particularités et les dimensions sous le numéro d'article ROP-020P2-1.
Configurer
Stock
-
- Afficher les articles en stock uniquement
Propriétés de base
-
Type
- ROP020PS1
-
Filtrer par type de données CAO
Filtrer par jours d'expédition standard
-
- Tous les articles
- Jour même
Propriétés optionnelles
- Les spécifications et les dimensions de certaines pièces peuvent ne pas être intégralement indiquées. Pour plus de détails, reportez-vous aux catalogues des fabricants .
Assistance technique
Mode de paiement
Fabrication à la demande
Certificats
Copyright © MISUMI Corporation All Rights Reserved.