Transmission à variation continue (modèle Hagino) W / L
[Features]
· Rotation has continuously variable speed.
· In the hagino type CVT, by placing a speed change pulley on the intermediate shaft and changing the position thereof, the rotational speed of the pulley on the driven side is changed utilizing the tension balance of the belt, allowing continuously variable transmission.
· Alignment is automatically adjusted.
· Both side disks and middle disks move freely on the shaft.
· Alignment with the driving side pulley and the driven side pulley is automatically adjusted.
· For this reason, the center of the belt is always held, and the belt is not strained.
· Rotation has continuously variable speed.
· In the hagino type CVT, by placing a speed change pulley on the intermediate shaft and changing the position thereof, the rotational speed of the pulley on the driven side is changed utilizing the tension balance of the belt, allowing continuously variable transmission.
· Alignment is automatically adjusted.
· Both side disks and middle disks move freely on the shaft.
· Alignment with the driving side pulley and the driven side pulley is automatically adjusted.
· For this reason, the center of the belt is always held, and the belt is not strained.
Référence pièce
Vous pouvez trouver ici le numéro
de référence lié au produit recherché.
Loading...
Configurer
Propriétés de base
-
Type détaillé
- Composants périphériques (console de type L)
- Corps principal (poulie de vitesse)
-
Type
- L-A
- W/L
-
Filtrer par type de données CAO
- 2D
- 3D
Filtrer par jours d'expédition standard
-
- Tous les articles
- 9 jours ou moins
Propriétés optionnelles
- Les spécifications et les dimensions de certaines pièces peuvent ne pas être intégralement indiquées. Pour plus de détails, reportez-vous aux catalogues des fabricants .
Assistance technique
Mode de paiement
Fabrication à la demande
Certificats
Copyright © MISUMI Corporation All Rights Reserved.