• Marques
  • Société
  • Contact
FR
Type Code Seach | *NOT READY*
#CODE
Suggestion de mots-clés
Suggestions de numéros d'articles
Produits discontinués

Coussinets / plastique (iglidur) / WSM

Coussinets / plastique (iglidur) / WSM

Cliquez sur cette image pour l'agrandir.

Cliquez sur cette image pour l'agrandir.

  • En promotion
  • Remise sur volume

IGUS

IGUS

iglidur® W300 gives excellent wear resistance, even in harsh environments or when used with rough shafts. Of all iglidur® materials, iglidur® W300 is the most resistant to these conditions.

Fiche technique

Référence pièce

Vous pouvez trouver ici le numéro
de référence lié au produit recherché.

iglidur® W300 | The Classic Endurance Runner up to 30 MPa, Sleeve Bearing (Form S)

Product Information


Excellent wear resistance on (virtually) all shafts
The iglidur® W300 material gives excellent wear resistance, even in harsh environments or when used with rough shafts. Of all iglidur® materials, iglidur® W300 is the most resistant to these conditions.
When to use it?
• When especially high service life is necessary
• When low coefficients of dynamic friction and high wear resistance are needed
• For use on 304 stainless steel shafts
• For harsh environments and very rough shafts
• Dirt resistant
When not to use it?
• For high loads starting at 50 MPa
  ►iglidur® Q
• When constant temperatures exceed +90°C
  ►iglidur® H
  ►iglidur® X
• For very wet environments
  ►iglidur® P
• When an economical bearing is required
  ►iglidur® G
Typical application areas
• Automation
• Printing industry
• Woodworking
• Mechatronics
• Test engineering and quality assurance

Material Properties

General propertiesUnitiglidur® W300Testing method
Densityg/cm31.24 
Colour yellow 
Max. moisture absorption at +23°C/50% r.h.% weight1.3DIN 53495
Max. water absorption% weight6.5 
Coefficient of sliding friction, dynamic, against steelμ0.08–0.23 
pv value, max. (dry)MPa · m/s0.23 
Mechanical properties
Flexural modulusMPa3,500DIN 53457
Flexural strength at +20°CMPa125DIN 53452
Compressive strengthMPa61 
Max. recommended surface pressure (+20°C)MPa60 
Shore-D hardness 77DIN 53505
Physical and thermal properties
Max. long-term application temperature°C+90 
Max. short-term application temperature°C+180 
Min. long-term application temperature°C–40 
Heat conductivityW/m · K0.24ASTM C 177
Coefficient of thermal expansion (at +23 °C)K–1 · 10–59DIN 53752
Electrical properties
Specific contact resistanceΩcm> 1013DIN IEC 93
Surface resistanceΩ> 1012DIN 53482

Dimensions

Sleeve Bearing (Form S)

2) Thickness < 1 mm: chamfer = 20°
Chamfer in relation to the d1    
d1 [mm]:Ø 1–6Ø 6–12Ø 12–30Ø > 30
f [mm]:0.30.50.81.2


Dimensions [mm]
d1d1-d2b1Part No.
 Tolerance3) h13 
2.0+0.014
+0.054		3.53.0WSM-0203-03
2.54.01.8WSM-0204-018
2.54.03.0WSM-0204-03
3.04.53.0WSM-0304-03
3.04.55.0WSM-0304-05
3.04.56.0WSM-0304-06
4.0+0.020
+0.068		5.54.0WSM-0405-04
4.05.56.0WSM-0405-06
4.05.58.0WSM-0405-08
4.05.510.0WSM-0405-10
5.07.05.0WSM-0507-05
5.07.08.0WSM-0507-08
5.07.010.0WSM-0507-10
6.0+0.010
+0.058		7.014.0WSM-0607-14
6.0+0.020
+0.068		8.06.0WSM-0608-06
6.08.08.0WSM-0608-08
6.08.09.5WSM-0608-09
6.08.010.0WSM-0608-10
6.08.011.8WSM-0608-11
6.08.013.8WSM-0608-13
7.0+0.025
+0.083		9.09.0WSM-0709-09
7.09.012.0WSM-0709-12
7.09.012.5WSM-0709-125
8.010.06.0WSM-0810-06
8.010.08.0WSM-0810-08
8.010.010.0WSM-0810-10
8.010.012.0WSM-0810-12
8.010.013.8WSM-0810-13
8.010.015.0WSM-0810-15
8.010.016.0WSM-0810-16
8.010.020.0WSM-0810-20
8.010.021.0WSM-0810-21
9.011.06.0WSM-0911-06
10.012.04.0WSM-1012-04
10.012.06.0WSM-1012-06
10.012.08.0WSM-1012-08
10.012.09.0WSM-1012-09
10.012.010.0WSM-1012-10
10.012.012.0WSM-1012-12
10.012.015.0WSM-1012-15
10.012.017.0WSM-1012-17
10.012.020.0WSM-1012-20
10.012.025.5WSM-1012-25.5
11.0+0.032
+0.102		13.08.0WSM-1113-08
12.014.04.0WSM-1214-04
12.014.05.0WSM-1214-05
12.014.06.0WSM-1214-06
12.014.08.0WSM-1214-08
12.014.010.0WSM-1214-10
12.014.012.0WSM-1214-12
12.014.015.0WSM-1214-15
12.014.020.0WSM-1214-20
12.014.025.0WSM-1214-25
13.015.07.0WSM-1315-07
13.015.010.0WSM-1315-10
13.015.015.0WSM-1315-15
13.015.020.0WSM-1315-20
14.016.07.3WSM-1416-07
14.016.010.0WSM-1416-10
14.016.015.0WSM-1416-15
14.016.020.0WSM-1416-20
14.016.025.0WSM-1416-25
14.016.033.0WSM-1416-33
15.017.010.0WSM-1517-10
15.017.015.0WSM-1517-15
15.017.020.0WSM-1517-20
15.017.025.0WSM-1517-25
16.018.07.0WSM-1618-07
16.018.08.0WSM-1618-08
16.018.011.5WSM-1618-11
16.018.012.0WSM-1618-12
16.018.015.0WSM-1618-15
16.018.020.0WSM-1618-20
16.018.025.0WSM-1618-25
16.018.030.0WSM-1618-30
16.018.035.0WSM-1618-35
16.018.045.0WSM-1618-45
18.020.012.0WSM-1820-12
18.020.015.0WSM-1820-15
18.020.020.0WSM-1820-20
18.020.025.0WSM-1820-25
18.020.033.0WSM-1820-33
18.020.035.0WSM-1820-35
19.0+0.040
+0.124		22.028.0WSM-1922-28
20.022.011.5WSM-2022-11
20.022.012.0WSM-2022-12
20.022.015.0WSM-2022-15
20.022.020.0WSM-2022-20
20.022.030.0WSM-2022-30
20.023.08.0WSM-2023-08
20.023.010.0WSM-2023-10
20.023.012.0WSM-2023-12
20.023.015.0WSM-2023-15
20.023.020.0WSM-2023-20
20.023.023.0WSM-2023-23
20.023.025.0WSM-2023-25
20.023.030.0WSM-2023-30
22.024.015.0WSM-2224-15
22.024.020.0WSM-2224-20
22.024.030.0WSM-2224-30
22.024.035.0WSM-2224-35
22.024.045.0WSM-2224-45
22.025.015.0WSM-2225-15
22.025.020.0WSM-2225-20
22.025.025.0WSM-2225-25
22.025.030.0WSM-2225-30
24.027.015.0WSM-2427-15
24.027.020.0WSM-2427-20
24.027.025.0WSM-2427-25
24.027.030.0WSM-2427-30
25.028.012.0WSM-2528-12
25.028.014.0WSM-2528-14
25.028.015.0WSM-2528-15
25.028.020.0WSM-2528-20
25.028.025.0WSM-2528-25
25.028.030.0WSM-2528-30
25.028.050.0WSM-2528-50
26.030.016.0WSM-2630-16
26.030.025.0WSM-2630-25
28.030.010.0WSM-2830-10
28.031.010.0WSM-2831-10
28.032.020.0WSM-2832-20
28.032.025.0WSM-2832-25
28.032.030.0WSM-2832-30
30.034.016.0WSM-3034-16
30.034.020.0WSM-3034-20
30.034.024.0WSM-3034-24
30.034.025.0WSM-3034-25
30.034.030.0WSM-3034-30
30.034.036.0WSM-3034-36
30.034.038.0WSM-3034-38
30.034.040.0WSM-3034-40
30.034.045.0WSM-3034-45
30.034.047.0WSM-3034-47
32.0+0.050
+0.150		36.020.0WSM-3236-20
32.036.025.0WSM-3236-25
32.036.030.0WSM-3236-30
32.036.040.0WSM-3236-40
35.039.020.0WSM-3539-20
35.039.030.0WSM-3539-30
35.039.040.0WSM-3539-40
35.039.050.0WSM-3539-50
35.040.07.0WSM-3540-07
40.044.020.0WSM-4044-20
40.044.030.0WSM-4044-30
40.044.040.0WSM-4044-40
40.044.050.0WSM-4044-50
45.050.020.0WSM-4550-20
45.050.030.0WSM-4550-30
45.050.040.0WSM-4550-40
45.050.050.0WSM-4550-50
50.055.020.0WSM-5055-20
50.055.030.0WSM-5055-30
50.055.040.0WSM-5055-40
50.055.050.0WSM-5055-50
50.055.055.0WSM-5055-55
50.055.060.0WSM-5055-60
55.0+0.060
+0.180		60.040.0WSM-5560-40
55.060.060.0WSM-5560-60
60.065.030.0WSM-6065-30
60.065.060.0WSM-6065-60
65.070.060.0WSM-6570-60
70.075.060.0WSM-7075-60
75.080.0100.0WSM-7580-100
80.085.020.0WSM-8085-20
80.085.0100.0WSM-8085-100
90.0+0.072
+0.212		95.0100.0WSM-9095-100
100.0105.0100.0WSM-100105-100
3) After press-fit.
 
Données à afficher
30
45
60
  1. 1
Référence pièce
WSM-0405-08
WSM-0607-14
WSM-0608-08
WSM-0608-10
WSM-0810-10
WSM-1517-15
WSM-1517-25
WSM-1618-30
WSM-1618-35
WSM-1618-45
WSM-2023-10
WSM-2224-45
WSM-2528-50
WSM-2832-20
WSM-3034-47
WSM-3539-20
WSM-3539-40
WSM-4044-30
WSM-4550-20
WSM-4550-40
WSM-5055-55
WSM-5055-60
Référence pièce
Prix unitaire standard
Quantité minimale de commandeRemise sur volume
Jour
d'expédition standard
?
RoHSDiamètre intérieur d1
(Ø) 		du moyeu d2
(Ø) 		Longueur totale b1
(mm) 		Épaisseur T
(mm)

1.37 €

26 Disponible 2 jours 1045.580.75

4.92 €

1 Disponible 2 jours 1067140.5

4.84 €

1 Disponible Jour même

Stock

106881

4.88 €

1 Disponible 3 jours 1068101

1.47 €

26 Disponible 2 jours 10810101

5.28 €

1 Disponible Jour même

Stock

101517151

5.70 €

1 Disponible 2 jours 101517251

2.13 €

26 Disponible 2 jours 101618151

6.26 €

1 Disponible 2 jours 101618151

6.88 €

1 Disponible 3 jours 101618151

6.32 €

3.35 €

1 Disponible Jour même

Stock

102023151.5

2.93 €

26 Disponible 2 jours 102224151

4.65 €

26 Disponible 2 jours 102528151.5

3.85 €

26 Disponible 2 jours 102832152

6.55 €

26 Disponible 2 jours 103034152

4.20 €

26 Disponible 2 jours 103539152

6.17 €

26 Disponible 2 jours 103539152

5.60 €

26 Disponible 2 jours 104044152

5.25 €

26 Disponible 2 jours 104550152.5

8.88 €

26 Disponible 2 jours 104550152.5

13.42 €

26 Disponible 2 jours 105055152.5

13.48 €

26 Disponible 2 jours 105055152.5

Loading...

  1. 1
 

Informations de base

Groupe des résines Groupe de polymères hautes performances Environnement Standard / Résistant aux corps étrangers / Résistant aux vibrations / Dans l'eau / Dans l'eau de mer / Dans un produit chimique Valeur PV maximale admissible(N/mm²·m/s) 0.23
Max. Pression de surface admissible P(N/mm2) 60 Max. Vélocité admissible V(m/s) 6 Tolérance de trou de logement recommandé h7
Condition de lubrification Non lubrifié

Configurer

Réinitialiser

22Numéro de référence applicable suggérée

Afficher les numéros de référence

Certaines spécifications ne sont pas encore précisées.
Le numéro de référence est identifié.

Stock

Propriétés de base

Filtrer par jours d'expédition standard

    • Tous les articles
    • Jour même
    • 2 jours ou moins
    • 3 jours ou moins

    Réinitialiser

Propriétés optionnelles

Assistance technique

Question technique

Mode de paiement

  • Facture
  • Prépaiement
  • PayPal

Fabrication à la demande

Changer de vue

Certificats

  • ISO-9001
  • ISO-14001
  • AEO Certification
  • RoHS
  • REACH

MISUMI dans le monde

Social Media

Informations légales

Copyright © MISUMI Corporation All Rights Reserved.