Régulateurs, modèle à fentes (Numéros de référence - Téléchargement CAO)
Standard type regulator series that includes low pressure versions.
Over 30 model numbers including various options can be selected from our website.
[Features]
· Adjuster screw: turning the adjuster screw clockwise will increase the output pressure.
· Relief valve: Prevents abnormal increases in output pressure by the valve stem and diaphragm separating when the output pressure exceeds the set pressure, allowing air pressure to vent to the atmosphere through the relief valve.
· Diaphragm: Provides stable air pressure output by opening and closing the valve system based on the force (output pressure) that the pressure regulating spring strikes the bottom of the diaphragm.
· The large 2215 regulators use a piston to balance the pressure regulating spring.
· Valve system: Only allows the required amount to pass from input to output when there is an imbalance between the diaphragm and pressure regulating spring.
· Excellent flow amount due to its wide radius valve openings.
· Gauge port: Accurately measures output pressure due to the center of the gauge port being located near the output side.
· Two gauge ports.
Over 30 model numbers including various options can be selected from our website.
[Features]
· Adjuster screw: turning the adjuster screw clockwise will increase the output pressure.
· Relief valve: Prevents abnormal increases in output pressure by the valve stem and diaphragm separating when the output pressure exceeds the set pressure, allowing air pressure to vent to the atmosphere through the relief valve.
· Diaphragm: Provides stable air pressure output by opening and closing the valve system based on the force (output pressure) that the pressure regulating spring strikes the bottom of the diaphragm.
· The large 2215 regulators use a piston to balance the pressure regulating spring.
· Valve system: Only allows the required amount to pass from input to output when there is an imbalance between the diaphragm and pressure regulating spring.
· Excellent flow amount due to its wide radius valve openings.
· Gauge port: Accurately measures output pressure due to the center of the gauge port being located near the output side.
· Two gauge ports.
Référence pièce
Vous pouvez trouver ici le numéro
de référence lié au produit recherché.
Loading...
Informations de base
| Régulateur, soupape de suralimentation | Régulateur | Type de régulateur | Standard | Fluide applicable | Air |
|---|---|---|---|---|---|
| Forme | Standard | Plage de pression de réglage(MPa) | 0.07~0.83 | Fonction contre-courant | Disponible |
| Côté alimentation, type de connexion | Rc | Pression de service minimum(MPa) | 2.06 | Pression de résistance garantie(MPa) | 3.09 |
| Support | NA | Plage de réglage | Standard | Montage sur panneau | NA |
| Bouton | Standard |
Configurer
Propriétés de base
-
Côté alimentation, diam. de connexion
-
Jauge de pression
- Non fourni
- Avec jauge de pression
- Non fourni
-
Type
- 2215
-
Filtrer par type de données CAO
Filtrer par jours d'expédition standard
-
- Tous les articles
- 6 jours ou moins
Propriétés optionnelles
- Les spécifications et les dimensions de certaines pièces peuvent ne pas être intégralement indiquées. Pour plus de détails, reportez-vous aux catalogues des fabricants .
Assistance technique
Mode de paiement
Fabrication à la demande
Certificats
Copyright © MISUMI Corporation All Rights Reserved.