Coude à 45° pour accouplement à simple pression JUNRON, série M (utilisation pour tuyau général) (Numéros de référence - Téléchargement CAO)
- Remise sur volume
[Features]
· Electroless nickel plating is applied to metal parts as standard.
· The nickel plating on all brass components of the M Series nipples and the plastic bodies have been standardized.
· Colored seals for seal identification.
· Each of the different types of R (PT) threads are coated with a different colored seal so they can be identified at a glance (PAT. NO 1820889).
· The body can be positioned in accordance with the withdrawal direction of the tube.
· The R (PT) threads of the elbow/tee and the resin joint sections rotate. This allows for free positioning in accordance with the withdrawal direction of the tube after the fitting has been mounted. In addition, the screw can be tightened while the resin part is fixed in position.
· The tube grip is equipped with a rotating mechanism.
· The tube grip rotates smoothly inside the fitting, which prevents the tube from turning and breaking.
· Electroless nickel plating is applied to metal parts as standard.
· The nickel plating on all brass components of the M Series nipples and the plastic bodies have been standardized.
· Colored seals for seal identification.
· Each of the different types of R (PT) threads are coated with a different colored seal so they can be identified at a glance (PAT. NO 1820889).
· The body can be positioned in accordance with the withdrawal direction of the tube.
· The R (PT) threads of the elbow/tee and the resin joint sections rotate. This allows for free positioning in accordance with the withdrawal direction of the tube after the fitting has been mounted. In addition, the screw can be tightened while the resin part is fixed in position.
· The tube grip is equipped with a rotating mechanism.
· The tube grip rotates smoothly inside the fitting, which prevents the tube from turning and breaking.
Référence pièce
Vous pouvez trouver ici le numéro
de référence lié au produit recherché.
PL45M-8-PT3/8-PM
Informations de base
| Type | Accouplement à simple effet | Type à raccord | Raccord à montage vissé | Fluide applicable | Eau / Air |
|---|---|---|---|---|---|
| Matériau du corps principal | PBT | Application | Standard / mini | Matériau de la vis finale | Laiton (plaqué au nickel) |
| Matériel d'étanchéité V | NBR résistant à l'eau | Montage par vis, sens | Coude | Coudes | Coude à 45° |
| Plage de températures de fonctionnement(°C) | 0::+60 |
Configurer
Propriétés de base
-
T à vis finale (mm)(mm)
-
Type
- PL45M-PM
-
D.E. 1 de tuyau applicable(φ)
-
T à vis finale (pouces)(pouces)
- 1/2
- 1/4
- 1/8
- 3/8
-
Filtrer par type de données CAO
Filtrer par jours d'expédition standard
-
- Tous les articles
- 10 jours ou moins
Propriétés optionnelles
- Les spécifications et les dimensions de certaines pièces peuvent ne pas être intégralement indiquées. Pour plus de détails, reportez-vous aux catalogues des fabricants .
Assistance technique
Mode de paiement
Fabrication à la demande
Certificats
Copyright © MISUMI Corporation All Rights Reserved.