T d'entretien pour accouplement à simple pression JUNRON, série M (utilisation pour tuyau général)
[Features]
· Electroless nickel plating is applied to metal parts as standard.
· The nickel plating in all brass parts of M series nipples and plastic bodies are standardized.
· Color seal for seal identification.
· Each of the different types of R (PT) screws are coated with a different colored seal so they can be identified at a glance (PAT.NO.1820889).
· You can position the body in accordance with the removal direction of the tube.
・R (PT) screw parts of elbow/Tee and the resin joint part rotate allowing for free positioning according to the retrieval direction of the tube after the fitting has been mounted. Moreover, the screw can be tightened while the resin part is fixed.
▪ The tube grip comes with a rotating mechanism.
▪ The tube grip rotates smoothly in the fitting thus preventing the turning of the tube.
· Electroless nickel plating is applied to metal parts as standard.
· The nickel plating in all brass parts of M series nipples and plastic bodies are standardized.
· Color seal for seal identification.
· Each of the different types of R (PT) screws are coated with a different colored seal so they can be identified at a glance (PAT.NO.1820889).
· You can position the body in accordance with the removal direction of the tube.
・R (PT) screw parts of elbow/Tee and the resin joint part rotate allowing for free positioning according to the retrieval direction of the tube after the fitting has been mounted. Moreover, the screw can be tightened while the resin part is fixed.
▪ The tube grip comes with a rotating mechanism.
▪ The tube grip rotates smoothly in the fitting thus preventing the turning of the tube.
Référence pièce
Vous pouvez trouver ici le numéro
de référence lié au produit recherché.
PTBM-8-PT1/4-PM
- Données produit
- Données CAO non disponibles
Informations de base
| Type | Accouplement à simple effet | Type à raccord | Embranchement de montage par vis | Fluide applicable | Eau / Air |
|---|---|---|---|---|---|
| Matériau du corps principal | PBT | Application | Standard / mini | Matériau de la vis finale | Laiton (plaqué au nickel) |
| Matériel d'étanchéité V | NBR résistant à l'eau | Montage par vis, raccordement | Raccord en T de service | Plage de températures de fonctionnement(°C) | 0::+60 |
| D.E. 1 de tuyau applicable(φ) | 8 | T à vis finale (pouces)(pouces) | 1/4 |
Configurer
Propriétés de base
-
Type
- PTBM-PM
Filtrer par jours d'expédition standard
-
- Tous les articles
- 10 jours ou moins
Propriétés optionnelles
- Les spécifications et les dimensions de certaines pièces peuvent ne pas être intégralement indiquées. Pour plus de détails, reportez-vous aux catalogues des fabricants .
Assistance technique
Mode de paiement
Fabrication à la demande
Certificats
Copyright © MISUMI Corporation All Rights Reserved.