Raccords en T de mêmes diamètres pour raccords pour tuyaux à souder en bout en acier inoxydable
- Remise sur volume
JIS B 2312, JIS B 2313-compliant butt-welded pipe fitting. Three types of materials are available, SUS304W, SUS316LW, and SUS316W. For SCH, it is provided in 10S, 20S, and 40S.
[Features]
· MIE TECHNO products are made through thorough quality control from the receiving of the materials to the finishing of the products according to the superior technology and rich experience, so that the products are extremely stable in quality and high in reliability.
· It is manufactured under a reasonable process, with each process managed thoroughly, and clients are satisfied with the delivery that meets the deadlines.
・As there are a wide range of requirements, the manufacturing range reaches from small diameter tubes to large diameter tubes.
・There are requirements from thin to thick ranges of thickness.
[Features]
· MIE TECHNO products are made through thorough quality control from the receiving of the materials to the finishing of the products according to the superior technology and rich experience, so that the products are extremely stable in quality and high in reliability.
· It is manufactured under a reasonable process, with each process managed thoroughly, and clients are satisfied with the delivery that meets the deadlines.
・As there are a wide range of requirements, the manufacturing range reaches from small diameter tubes to large diameter tubes.
・There are requirements from thin to thick ranges of thickness.
Référence pièce
Vous pouvez trouver ici le numéro
de référence lié au produit recherché.
- Données produit
- Données CAO non disponibles
Référence pièce
|
|---|
| SUS304W-T-S-4B-4B-4B-SCH10 |
| SUS304W-T-S-4B-4B-4B-SCH20 |
| Référence pièce |
Prix unitaire standard
| Quantité minimale de commande | Remise sur volume | Épaisseur nominale | Diam. nominal | |
|---|---|---|---|---|---|---|
89.36 € | 1 | 7 jours | SCH10 | 4B | ||
107.01 € | 1 | 8 jours | SCH20 | 4B |
Loading...
Informations de base
| Type | Type à soudage en bout | Forme du raccord | Raccord en T à diam. identique | Matériau | Acier inoxydable (EN 1.4301 équiv.) |
|---|---|---|---|---|---|
| Fluide applicable | aucune restriction du fabricant |
Configurer
Propriétés de base
-
Épaisseur nominale
-
Type
- SUS304W-T-S
-
Diam. nominal
Filtrer par jours d'expédition standard
-
- Tous les articles
- 6 jours ou moins
- 7 jours ou moins
- 8 jours ou moins
- 11 jours ou moins
Propriétés optionnelles
- Les spécifications et les dimensions de certaines pièces peuvent ne pas être intégralement indiquées. Pour plus de détails, reportez-vous aux catalogues des fabricants .
Assistance technique
Mode de paiement
Fabrication à la demande
Certificats
Copyright © MISUMI Corporation All Rights Reserved.