Vanne d'arrêt, à vis, en bronze sans plomb, type 125
MUEN-KUN® — Enables the provision of safe (lead-free) water. A lead-free valve manufactured from a copper alloy for supplying water/heated water.
[Features]
· The materials are made of copper alloy, which has excellent resistance to corrosion and is compatible with underground environments. The shape is suitably designed for fork handle operation.
· Two types of shaft sealing O-rings are further protected by dustproof felt.
· With no sand/dust intrusion inside the valve, the life of the O-rings is improved dramatically. Please use this check valve with full confidence even in lines with severely high opening-closing frequency. In addition, the packing nut is secured by metal contact. Therefore, there is no loosening of the tip (fork) of the T handle when opening and closing.
· A secure design compliant with JIS standards: The stem rising type is a JIS-standard product (however, the shaft seals are O-ring type). However, the stem non-rising type is a JIS-compliant product. In the stem rising type, the valve body has same specification as that of solid JIS standard body. Furthermore, this is a round body type with minimal deformation. The valve is a ‘convenient cartridge type’ that is designed for replacing the packing in the event of a leakage. All the packing is built into the glands. Therefore, simply remove gland to replace the O-ring.
· Dezincification-resistant lead-free bronze (C6803) is used in the stem material.
[Features]
· The materials are made of copper alloy, which has excellent resistance to corrosion and is compatible with underground environments. The shape is suitably designed for fork handle operation.
· Two types of shaft sealing O-rings are further protected by dustproof felt.
· With no sand/dust intrusion inside the valve, the life of the O-rings is improved dramatically. Please use this check valve with full confidence even in lines with severely high opening-closing frequency. In addition, the packing nut is secured by metal contact. Therefore, there is no loosening of the tip (fork) of the T handle when opening and closing.
· A secure design compliant with JIS standards: The stem rising type is a JIS-standard product (however, the shaft seals are O-ring type). However, the stem non-rising type is a JIS-compliant product. In the stem rising type, the valve body has same specification as that of solid JIS standard body. Furthermore, this is a round body type with minimal deformation. The valve is a ‘convenient cartridge type’ that is designed for replacing the packing in the event of a leakage. All the packing is built into the glands. Therefore, simply remove gland to replace the O-ring.
· Dezincification-resistant lead-free bronze (C6803) is used in the stem material.
Référence pièce
Vous pouvez trouver ici le numéro
de référence lié au produit recherché.
M125E-BS-N-25A
Référence pièce
|
|---|
| M125E-BS-N-25A |
| Référence pièce |
Prix unitaire standard
| Quantité minimale de commande | Remise sur volume | Côté alimentation, taille nominale de filetage de tuyauterie, nom B (nom A) | Côté commande, diamètre de tuyau (φ) | L (mm) | H (mm) | D1 (φ) | |
|---|---|---|---|---|---|---|---|---|---|
67.72 € | 1 | 8 jours | 1B (25A) | 1B(25A) | 57 | 106 | 63 |
Loading...
Informations de base
| Forme du corps principal | Droit | Fluides utilisables | Eau | Pression nominale | Type 125 |
|---|---|---|---|---|---|
| Côté alimentation, type de connexion | Rc | Côté commande, types de connexions | Type à souder | Forme de la poignée | Poignée ronde |
| Plage de températures de fonctionnement(°C) | ::100 | Méthode de fonctionnement | Type à fonctionnement manuel | Détails de la pression admissible maximale (débit régulier à 100°C maximum)(MPa) | 1.0 |
Configurer
Propriétés de base
-
Côté commande, diamètre de tuyau(φ)
-
Type
- M125E-BS-N
-
Côté alimentation, taille nominale de filetage de tuyauterie, nom B (nom A)
- 1/2B
- 3/4B (20A)
- 1B (25A)
- 1 1/4B (32A)
- 1 1/2B (40A)
- 2B (50A)
- 1/2B
-
Filtrer par type de données CAO
Filtrer par jours d'expédition standard
-
- Tous les articles
- 8 jours ou moins
Propriétés optionnelles
- Les spécifications et les dimensions de certaines pièces peuvent ne pas être intégralement indiquées. Pour plus de détails, reportez-vous aux catalogues des fabricants .
Assistance technique
Mode de paiement
Fabrication à la demande
Certificats
Copyright © MISUMI Corporation All Rights Reserved.