KKA*P-*F, Coupleurs S, Acier inoxydable, Modèle taraudé
- En promotion
[Features]
· Female thread type plug.
· Body material: stainless steel (SUS304).
· Seal material: fluoroelastomer (special FKM).
· Available with or without check valve to suit different working conditions.
· Liquid dripping amount: 0.02 to 0.77 cm³ at each removal; aeration amount: 0.1 to 2.7 cm³ at each attachment.
· Non-greased specification (standard).
(i)Remarque
- Les pages Web des produits qui ne disposent actuellement pas de pages individuelles sur ce site seront publiées de manière ponctuelle.
Référence pièce
Vous pouvez trouver ici le numéro
de référence lié au produit recherché.
S Coupler KKA Series Stainless Steel Type Plug (P) Female Thread Type Specifications
Without, check valve, plug, female thread type external appearance
JIS symbols for the KKA series
| Working Fluid | Water, air |
|---|---|
| Operating Pressure Range*1 | KKA3: -100 kPa to 1 MPa KKA4, KKA6, KKA7, KKA8, KKA9: 0 to 1 MPa |
| Guaranteed Proof Pressure | 10 MPa |
| Ambient Temperature and Working Fluid Temperature Range | -5 to +150℃ (no freezing) *Cannot be used for steam. |
| Non-greased Specification | Does not use grease. (Rubber and metal sliding parts: fluorine coating) |
| Material | Metal parts: SUS304; rubber parts: fluoroelastomer (special FKM) |
*1: Do not use with a leak tester or for vacuum retention as zero leakage cannot be guaranteed.
Performance
- Plug connection method: single-action connection and release
- Check valve: check valve built-in to both plug and socket sides, without check valve
*The KKA series cannot be connected to the KK series or the KKH series.
Characteristics of Models With Check Valve on Both Sides
| Body Size | Liquid Dripping Amount (cm³ per instance) | Aeration Amount (cm³ per instance) |
|---|---|---|
| KKA3 | 0.02 | 0.1 |
| KKA4 | 0.04 | 0.1 |
| KKA6 | 0.06 | 0.2 |
| KKA7 | 0.14 | 0.5 |
| KKA8 | 0.27 | 0.9 |
| KKA9 | 0.77 | 2.7 |
- "Liquid dripping amount" refers to the amount of internal water that is lost when the plug socket is disengaged.
- "Aeration amount" refers to the amount of external air that is entrained when the plug and socket are connected.
Flow Rate Characteristics
Air
Plug: with check valve / socket: with check valve
Plug: without check valve / socket: with check valve
Plug: with check valve / socket: with check valve
Plug: without check valve / socket: without check valve
Structural Drawing
Plug structural drawing
KKA series structural drawing
| Number | Part Name | Material | Note |
|---|---|---|---|
| 1 | Plug body | SUS304 | Fluorine coating |
| 2 | Plug rear body | SUS304 | - |
| 3 | Plug valve | SUS304 | - |
| 4 | Valve O-ring | Special FKM | Fluorine coating |
| 5 | Plug body O-ring | Special FKM | Fluorine coating |
| 6 | Plug valve spring | Equivalent to SUS304 | KKA3 |
| SUS304 | KKA4, KKA6, KKA7, KKA8, KKA9 |
Dimensions: Plug (P)
With Check Valve
With check valve, female thread type dimensional drawing
(Unit: mm)
| Body Size | Model | T Connection Port Diameter | H Width Across Flats | L1 | L2 | Minimum Hole Diameter | Effective Cross-sectional Area mm2 | Weight g |
|---|---|---|---|---|---|---|---|---|
| 1/8 | KKA3P-01F | Rc 1/8 | 14 | 36.0 | 16.0 | 5.6 | 17.4 | 20.2 |
| KKA3P-02F | Rc 1/4 | 17 | 39.6 | 31.8 | ||||
| KKA3P-03F | Rc 3/8 | 19 | 40.4 | 35.8 | ||||
| 1/4 | KKA4P-02F | Rc 1/4 | 17 | 43.4 | 18.9 | 6.9 | 26.4 | 36.1 |
| KKA4P-03F | Rc 3/8 | 19 | 44.4 | 40.2 | ||||
| KKA4P-04F | Rc 1/2 | 24 | 48.6 | 69.7 | ||||
| 1/2 | KKA6P-03F | Rc 3/8 | 48.7 | 20.4 | 10.0 | 54.2 | 84.1 | |
| KKA6P-04F | Rc 1/2 | 52.9 | 79.7 | |||||
| KKA6P-06F | Rc 3/4 | 30 | 54.6 | 123.8 | ||||
| 3/4 | KKA7P-04F | Rc 1/2 | 32 | 67.7 | 27.6 | 13.5 | 99.6 | 217.1 |
| KKA7P-06F | Rc 3/4 | 69.4 | 196.8 | |||||
| KKA7P-10F | Rc 1 | 41 | 72.4 | 325.9 | ||||
| 1 | KKA8P-06F | Rc 3/4 | 82.0 | 35.6 | 17.5 | 168.3 | 420.5 | |
| KKA8P-10F | Rc 1 | 85.0 | 391.3 | |||||
| KKA8P-12F | Rc1 1/4 | 50 | 87.3 | 552.8 | ||||
| 1 1/4 | KKA9P-10F | Rc 1 | 55 | 107.8 | 49.1 | 24.6 | 332.1 | 986.9 |
| KKA9P-12F | Rc1 1/4 | 110.1 | 925.6 | |||||
| KKA9P-14F | Rc1 1/2 | 110.1 | 848.2 |
Without Check Valve
Without check valve, female thread type dimensional drawing
(Unit: mm)
| Body Size | Model | T Connection Port Diameter | H Width Across Flats | L1 | L2 | Minimum Hole Diameter | Effective Cross-sectional Area mm2 | Weight g |
|---|---|---|---|---|---|---|---|---|
| 1/8 | KKA3P-01F-1 | Rc 1/8 | 14 | 23.2 | 16.0 | 6.0 | 22.6 | 9.6 |
| KKA3P-02F-1 | Rc 1/4 | 17 | 30.3 | 20.2 | ||||
| KKA3P-03F-1 | Rc 3/8 | 19 | 32.0 | 26.2 | ||||
| 1/4 | KKA4P-02F-1 | Rc 1/4 | 17 | 29.7 | 18.9 | 8.0 | 40.2 | 20.0 |
| KKA4P-03F-1 | Rc 3/8 | 19 | 34.0 | 25.8 | ||||
| KKA4P-04F-1 | Rc 1/2 | 24 | 39.4 | 46.1 | ||||
| 1/2 | KKA6P-03F-1 | Rc 3/8 | 22 | 30.9 | 20.4 | 11.0 | 76.0 | 34.3 |
| KKA6P-04F-1 | Rc 1/2 | 24 | 39.6 | 50.0 | ||||
| KKA6P-06F-1 | Rc 3/4 | 30 | 42.8 | 78.6 |
Notes
- *The image is representative of the product. The actual product may vary from the images shown.
- *Refer to the manufacturer's catalog for information not provided above.
| Référence pièce | Relatif à |
Prix unitaire standard
| Quantité minimale de commande | Remise sur volume | Matériau du joint | Plage de températures de fonctionnement (°C) | Plage de pression de fonctionnement (MPa) | Size of Body | Pipe Connection Bore Dia. | With or Without Check Valve | |
|---|---|---|---|---|---|---|---|---|---|---|---|
32.71 € | 1 | 22 jours | - | -5～150 | -0.1～1 | 1/8 | Rc1/8 | Y | |||
17.11 € | 1 | 4 jours | - | -5～150 | -0.1～1 | 1/8 | Rc1/8 | N | |||
32.71 € | 1 | 4 jours | - | -5～150 | -0.1～1 | 1/8 | Rc1/4 | Y | |||
17.11 € | 1 | 26 jours | - | -5～ 150 | -0.1～ 1 | 1/8 | Rc1/4 | N | |||
| - | 32.71 € | 1 | 26 jours | [NBR] 00011 | -5～ 150 | -0.1～ 1 | 1/8 | Rc3/8 | Y | ||
| - | 17.11 € | 1 | 26 jours | [NBR] 00011 | -5～ 150 | -0.1～ 1 | 1/8 | Rc3/8 | N | ||
37.39 € | 1 | 4 jours | - | -5～150 | 0～1 | 1/4 | Rc1/4 | Y | |||
18.73 € | 1 | 4 jours | - | -5～150 | 0～1 | 1/4 | Rc1/4 | N | |||
37.39 € 25.05 € | 1 |
Jour même
Stock | - | -5～150 | 0～1 | 1/4 | Rc3/8 | Y | |||
18.73 € | 1 | 26 jours | - | -5～ 150 | 0～ 1 | 1/4 | Rc3/8 | N | |||
45.11 € | 1 | 22 jours | - | -5～ 150 | 0～ 1 | 1/4 | Rc1/4 | Y | |||
| - | 26.52 € | 1 | 26 jours | [NBR] 00011 | -5～ 150 | 0～ 1 | 1/4 | Rc1/4 | N | ||
57.60 € | 1 | 4 jours | - | -5～150 | 0～1 | 1/2 | Rc3/8 | Y | |||
16.44 € | 1 | 22 jours | - | -5～ 150 | 0～ 1 | 1/2 | Rc3/8 | N | |||
63.77 € | 1 | 4 jours | - | -5～150 | 0～1 | 1/2 | Rc1/2 | Y | |||
42.05 € | 1 | 4 jours | - | -5～150 | 0～1 | 1/2 | Rc1/2 | N | |||
71.60 € | 1 | 4 jours | - | -5～150 | 0～1 | 1/2 | Rc 3/4 | Y | |||
| - | 49.79 € | 1 | 26 jours | [NBR] 00011 | -5～ 150 | 0～ 1 | 1/2 | Rc 3/4 | N | ||
136.87 € | 1 | 26 jours | - | -5～ 150 | 0～ 1 | 3/4 | Rc1/4 | Y | |||
137.15 € | 1 | 22 jours | - | -5～ 150 | 0～ 1 | 3/4 | Rc 3/4 | Y | |||
153.94 € | 1 | 26 jours | - | -5～ 150 | 0～ 1 | 3/4 | Rc 1 | Y | |||
191.31 € | 1 | 26 jours | - | -5～ 150 | 0～ 1 | 1 | Rc 3/4 | Y | |||
191.31 € | 1 | 22 jours | - | -5～ 150 | 0～ 1 | 1 | Rc 1 | Y | |||
| - | 236.42 € | 1 | 26 jours | [NBR] 00011 | -5～ 150 | 0～ 1 | 1 | Rc1 1/4 | Y | ||
| - | 368.65 € | 1 | 26 jours | [NBR] 00011 | -5～ 150 | 0～ 1 | 1 1/4 | Rc 1 | Y | ||
390.40 € | 1 | 26 jours | - | -5～ 150 | 0～ 1 | 1 1/4 | Rc1 1/4 | Y | |||
402.03 € | 1 | 26 jours | - | -5～ 150 | 0～ 1 | 1 1/4 | Rc1 1/2 | Y |
Loading...
Informations de base
| Type | Standard | Type de raccord | Female Threaded Tapped | Mâle/femelle | Plug |
|---|---|---|---|---|---|
| Matériau du corps principal | Acier inoxydable (EN 1.4301 équiv.) | Fluide applicable | Water / Air | Environnement de fonctionnement, applications | Standard |
Configurer
Stock
-
- Afficher les articles en stock uniquement
Propriétés de base
-
Matériau du joint
- NBR
- NBR
-
Size of Body
- 1
- 1 1/4
- 1/2
- 1/4
- 1/8
- 3/4
-
Pipe Connection Bore Dia.
- Rc 1
- Rc1 1/2
- Rc1 1/4
- Rc1/2
- Rc1/4
- Rc1/8
- Rc 3/4
- Rc3/8
-
With or Without Check Valve
- N
- Y
-
Type
- KKA□P-□F
- KKA□P-□F-1
-
Filtrer par type de données CAO
- 2D
- 3D
Filtrer par jours d'expédition standard
-
- Tous les articles
- Jour même
- 4 jours ou moins
- 22 jours ou moins
- 26 jours ou moins
Propriétés optionnelles
- Les spécifications et les dimensions de certaines pièces peuvent ne pas être intégralement indiquées. Pour plus de détails, reportez-vous aux catalogues des fabricants .
Assistance technique
Mode de paiement
Fabrication à la demande
Certificats
Copyright © MISUMI Corporation All Rights Reserved.