Raccord PILLAR de type Super 300, coude mâle
◆ Reduction in tightening torque by updated sealing mechanism
Since the sealing force acts in radial direction as well as in thrust direction, this fitting is so constructed as to provide the stabilized sealing performance for a long time within wide temperature range, and to be resistible against heat cycle.
◆ Greatly enhanced workability due to simplified tightening control
The adoption of gauge ring made it possible to execute the union nut tightening control with sound, tactile impression and visual method, which greatly improved the workability. Further it has eliminated the fluctuation in execution such as insufficient tightening, excessive tightening, etc., thus assuring the safe and stabilized performance.
◆ Excellent sealing performance
Exhibits high sealing performance against each chemical liquid. Even the removal liquid having high penetration performance will not be oozed out.
◆ Radical reduction in micro-bubble and liquid accumulation
Since the flow passage sectional area is little decreased due to tightening of union nut, the flow passage will not be interfered. Besides, the micro-bubble/liquid accumulation was radically reduced due to adoption of special shape sleeve.
◆ high working pressure/temperature
The maximum working temperature is 200°C, and the tube holding strength is over the burst pressure of tube.
Référence pièce
Vous pouvez trouver ici le numéro
de référence lié au produit recherché.
- Données produit
- Données CAO non disponibles
Référence pièce
|
|---|
| P-ME6-1B |
| P-ME6-4A |
| P-ME12-3B |
| P-ME19-8A |
| P-ME25-4A |
| Référence pièce |
Prix unitaire standard
| Quantité minimale de commande | Remise sur volume | Matériau du corps principal | Diam. extérieur du tube applicable (mm) D (D1) | D.E. de tube applicable (mm) D2 | D.E. de tube applicable (pouces) D (D1) | D.E. de tube applicable (pouces) D2 | Type de vis d'assemblage M (M1) | Vis d'assemblage nominale M (M1) | |
|---|---|---|---|---|---|---|---|---|---|---|---|
46.58 € | 1 | 13 jours | PFA | 6 | 4 | - | - | R | 1/8B | ||
102.74 € | 1 | 13 jours | PTFE | 6 | 4 | - | - | R | 1/2B | ||
97.09 € | 1 | 13 jours | PFA | 12 | 10 | - | - | R | 3/8B | ||
184.95 € | 1 | 13 jours | PTFE | 19 | 15.8 | - | - | R | 1B | ||
268.44 € | 1 | 13 jours | PTFE | 25 | 22 | - | - | R | 1/2B |
Loading...
Informations de base
| Type | Corps de fixation | Type de connexion | Vis⇔tuyau | Type de connexion filetage à tuyau | Coudé fileté |
|---|---|---|---|---|---|
| Type de composant associé | Écrou | Pression de service max.(MPa) | 0.7 | Température maximale de fonctionnement(°C) | 200 |
Configurer
Propriétés de base
-
Matériau du corps principal
- PTFE
- PFA
-
Diam. extérieur du tube applicable (mm) D (D1)
-
D.E. de tube applicable (mm) D2
-
D.E. de tube applicable (pouces) D (D1)
-
D.E. de tube applicable (pouces) D2
-
Vis d'assemblage nominale M (M1)
-
Type
- P-ME
-
Type de vis d'assemblage M (M1)
- R
- NPT (filetage mâle)
Filtrer par jours d'expédition standard
-
- Tous les articles
- 13 jours ou moins
- 50 jours ou moins
Propriétés optionnelles
- Les spécifications et les dimensions de certaines pièces peuvent ne pas être intégralement indiquées. Pour plus de détails, reportez-vous aux catalogues des fabricants .
Assistance technique
Mode de paiement
Fabrication à la demande
Certificats
Copyright © MISUMI Corporation All Rights Reserved.