DT, Raccords à bagues - Té mâle,Té égal (Numéros de référence - Téléchargement CAO)
[Features]
· Can be used with soft copper pipes.
· A non-directional type metal sleeve.
· The sleeve helps protect against external damage.
· Low pressure loss.
[Applications]
· Used for 90° branch connections in both directions.
(i)Remarque
- Refer to the catalog for product specifications.
- Product images may be representative images. Refer to the catalog for details.
Référence pièce
Vous pouvez trouver ici le numéro
de référence lié au produit recherché.
Union Tee DT Outline Drawing And Dimensions
Union Tee DT outline drawing
| Applicable tube outer diameter mm | Model | H1 (width across flats) | H2 (width across flats) | L | M | Effective cross-sectional area mm2 | Weight g |
|---|---|---|---|---|---|---|---|
| 4 | DT04-00 | 10 | 10 | 23.5 | 15 | 5.7 | 32 |
| 6 | DT06-00 | 10 | 12 | 23.5 | 16 | 14 | 36 |
| 8 | DT08-00 | 12 | 14 | 24.5 | 16 | 25 | 47 |
| 10 | DT10-00 | 14 | 17 | 26.5 | 17 | 49 | 70 |
| 12 | DT12-00 | 17 | 19 | 28.5 | 17 | 55 | 70 |
Self-Align Fittings H/DL/L/LL Series Common Specifications (Reference)
A non-directional type sleeve
The sleeve has no directionality and so there is no need to worry about mis-insertions leading to accidents or downtime.
The sleeve helps protect against external damage
The section of the sleeve which engages the workpiece is a single type, giving it a strong edge and ensuring external damage will not easily lead to impaired functionality.
Low pressure loss
Being a structure with no insert, there is only a small amount of flow resistance, allowing a large amount of flow-through.
The product series features a wide variety of models and sizes
There are 10 model types available, including the swivel type. The series includes 5 sizes with applicable tube outer diameters ranging from ø4 to 12 mm, allowing use in a wide range of applications.
Structure
Self-Align Fittings H/DL/L/LL series structure
Specifications
| Applicable tube material | Nylon tube, soft nylon tube, soft copper pipe (C1220T-O) | |
|---|---|---|
| Applicable tube outer diameter | ø4, ø6, ø8, ø10, ø12 | |
| Maximum operating pressure | 1 MPa | |
| Guaranteed pressure resistance | 10 MPa | |
| Usable fluids | Air | |
| Thread | Mounting section | JIS B0203 (tapered thread for pipes/tubes) |
| Nut section | JIS B0205 (metric fine thread) | |
| Threaded section sealant Note 1: | None or with sealant | |
Note 1: Male elbows, male branch tees and male run tees with sealants are manufactured to order. Add an 'S' to the end of the part number if you wish to include sealant.
Main Component Materials
| Main body | C3604, C3771BE |
|---|---|
| Nut | C3604 |
| Sleeve | C2700 |
Référence pièce
|
|---|
| DT06-00-X2 |
| DT08-00-X2 |
| DT10-00-X2 |
| DT12-00-X2 |
| Référence pièce |
Prix unitaire standard
| Quantité minimale de commande | Remise sur volume | Traitement de surface | Diamètre extérieur de la taille du tube applicable (mm) | Sleeve material | |
|---|---|---|---|---|---|---|---|
4.55 € | 10 | 26 jours | Placage nickel | - | - | ||
5.45 € | 10 | 26 jours | Placage nickel | - | - | ||
6.87 € | 10 | 26 jours | Placage nickel | - | - | ||
8.47 € | 10 | 26 jours | Placage nickel | - | - |
Loading...
Informations de base
| Type de connexion | Tuyau⇔raccord de tuyau de même diamètre | Forme de raccord tube à tube | Raccord union en T | Matériau | Laiton |
|---|
Configurer
Propriétés de base
-
Diamètre extérieur de la taille du tube applicable(mm)
-
Sleeve material
- C2700
-
Type
- DT□□-00
- DT□□-00-X2
-
Traitement de surface
- NA
- Placage nickel
-
Filtrer par type de données CAO
- 2D
- 3D
Filtrer par jours d'expédition standard
-
- Tous les articles
- 4 jours ou moins
- 26 jours ou moins
Propriétés optionnelles
- Les spécifications et les dimensions de certaines pièces peuvent ne pas être intégralement indiquées. Pour plus de détails, reportez-vous aux catalogues des fabricants .
Assistance technique
Mode de paiement
Fabrication à la demande
Certificats
Copyright © MISUMI Corporation All Rights Reserved.