KBV, Bornier d'alimentation modulaire, Module de raccord coudé
[Features]
· Allows for centralized or distributed piping for use in different applications.
· Single-action tool-free connection and disconnection.
· Air output in any direction over 360°.
(i)Remarque
- *See the catalog for detailed specs and materials.
- Product images may be representative images. Refer to the catalog for details.
Référence pièce
Vous pouvez trouver ici le numéro
de référence lié au produit recherché.
Piping Module KB Series Elbow Socket Module Specifications
Elbow Socket Module external appearance
Elbow Socket Module dimensional drawing
| Model | T Connection threads | H Hex size | D1 | D2 | D3 | L1 | L2 | L3 | L4 | A | Weight g |
|---|---|---|---|---|---|---|---|---|---|---|---|
| KBV1-M5 | M5 ×; 0.8 | 12 | 12.8 | 13.6 | 16.8 | 25.0 | 33.0 | 10.4 | 13.0 | 19.5 | 12.4 |
| KBV1-M6 | M6 × 1 | 11.6 | |||||||||
| KBV2-M5 | M5 ×; 0.8 | 17.6 | 21.0 | 26.0 | 36.0 | 10.1 | 15.5 | 22.5 | 14.8 | ||
| KBV2-M6 | M6 × 1 | 14.0 | |||||||||
| KBV2-R1 | Rc 1/8 | 14 | 15.2 | 29.5 | 15.3 | ||||||
| KBV3-R1 | 25.2 | 28.6 | 30.5 | 42.6 | 11.4 | 20.5 | 27.0 | 22.0 | |||
| KBV3-R2 | Rc 1/4 | 19 | 18.5 | 32.0 | 19.5 | 27.0 | |||||
| KBV4-R2 | 22 | 20.9 | 27.0 | 30.4 | 36.5 | 41.4 | 12.2 | 18.0 | 25.0 | 40.6 | |
| KBV4-R3 | Rc 3/8 | 43.0 | 44.7 |
Units: mm
Specifications
| Usable fluids | Air | |
|---|---|---|
| Operating pressure range Note: | -100 kPa to 1 MPa | |
| Guaranteed pressure resistance | 3 MPa | |
| Ambient temperature and working fluid temperature | -5 to 60℃ (no freezing) | |
| Thread | Mounting section | JIS B0203 (tapered thread for pipes/tubes) |
| JIS B0205 (metric coarse thread) | ||
| Nut section | JIS B0205 (metric fine thread) | |
| Screw section seal (standard) | Includes sealing agent | |
| Copper-free specification (standard) | All brass parts have electroless nickel plating | |
Note: Do not use with a leak tester or for other forms of vacuum retention as they are not guaranteed for zero leakage.
Main Component Materials
| Body | C3604, PBT, POM |
|---|---|
| Stud | POM |
| Lock ring | POM |
| Spring | SUS304 |
| Spring guide | POM |
| Stopper | POM |
| Thread | C3604 |
| Guide | SUS304, PBT, C3604 |
| Collet, release button | POM |
| Seal, O-ring | NBR |
| Chuck | SUS304 |
Attachment
Attachment method 1: Align the arrows so that they match each other
Insert each of the piping modules by matching the arrows on the lock ring and the body or stud of the other module. If you are having difficulty attaching the modules, rotate them a little to the left and right while pushing in. The modules will not remain attached if the arrows have not been properly aligned and will be ejected when any pressure is applied. Do not rotate or alter the lock ring before attaching. If you do rotate the lock ring before attachment, the internal parts (spring, spring guide) may fall out.
Attachment method 2: Do not touch the lock ring
After attaching, rotate the piping modules to the left or right, or pull on them to make sure they are securely attached. However, be careful not to touch the lock ring in the process of doing this. Touching the lock ring may cause it to unlock.
Removal Method
Removal method 1: Rotate the lock ring 90°. Hold in this position.
Be sure to release the pressure inside the piping before removing. If unlocked while still pressurized, the piping modules may be forcibly ejected. Turn the lock ring 90° in the direction indicated by the arrow. This will release the lock. The lock ring will automatically hold this position, so you don't need to hold it in place by hand.
Removal method 2: Do not touch the lock ring.
Unlike with attachment, simply pull the piping modules to remove them. Be careful not to touch the lock ring in the process of doing this. If you do touch the lock ring, it may lock again and you will not be able to remove them. Once removed, the lock spring will automatically counter rotate 90° back to its original position via the action of its built-in spring.
Caution
- Do not apply a bend to the piping modules if using them while connected. This could result in deformation or damage of the piping. Also, be sure to use the KBX bracket for connections of 5 stations or more. Failure to use the bracket may cause the piping to become deformed due to bending or deflection.
- Each of the piping modules can be connected to other modules as long as they have the same body size.
- When attaching female connector union and female connector elbow union, use the body's hexagonal surface and tighten with a suitable wrench. Use the root nearest the thread when tightening with a wrench. The hexagonal surface may become damaged if the wrench is not an appropriate size for it.
Référence pièce
|
|---|
| KBV1-M5 |
| KBV1-M6 |
| KBV2-M5 |
| KBV2-M6 |
| KBV2-R1 |
| KBV3-R1 |
| KBV3-R2 |
| KBV4-R2 |
| KBV4-R3 |
| Référence pièce |
Prix unitaire standard
| Quantité minimale de commande | Remise sur volume | Connection Type | Connection screw | Size of Body Code | |
|---|---|---|---|---|---|---|---|
5.53 € | 10 | 26 jours | M | 5×0,8 | 1 | ||
5.53 € | 10 | 26 jours | M | 6×1,0 | 1 | ||
6.15 € | 10 | 26 jours | M | 5×0,8 | 2 | ||
6.15 € | 10 | 26 jours | M | 6×1,0 | 2 | ||
6.19 € | 10 | 26 jours | RC | 1/8 | 2 | ||
7.23 € | 10 | 26 jours | RC | 1/8 | 3 | ||
8.37 € | 10 | 4 jours | Rc | 1/4 | 3 | ||
10.94 € | 10 | 4 jours | Rc | 1/4 | 4 | ||
11.82 € | 10 | 26 jours | RC | 3/8 | 4 |
Loading...
Informations de base
| Type | Simple effet / vis | Type à raccord | Sens de montage par vis | Fluide applicable | Air |
|---|---|---|---|---|---|
| Matériau du corps principal | PP | Application | Standard/Mini | Matériau du filetage | EN CW614N équiv. |
| Packing, Material of O-Ring | EPDM (revêtement en fluorine) | Montage par vis, sens | Coude | Coudes | Raccord union coudé |
| Couleur du bouton de déverrouillage | Bleu |
Configurer
Propriétés de base
-
Connection Type
- M
- RC
- Rc
-
Connection screw
- 1/4
- 1/8
- 3/8
- 5×0,8
- 6×1,0
-
Size of Body Code
- 1
- 2
- 3
- 4
-
Type
- KBV
-
Filtrer par type de données CAO
- 2D
- 3D
Filtrer par jours d'expédition standard
-
- Tous les articles
- 4 jours ou moins
- 26 jours ou moins
Propriétés optionnelles
- Les spécifications et les dimensions de certaines pièces peuvent ne pas être intégralement indiquées. Pour plus de détails, reportez-vous aux catalogues des fabricants .
Assistance technique
Mode de paiement
Fabrication à la demande
Certificats
Copyright © MISUMI Corporation All Rights Reserved.