KBS, Bornier d'alimentation modulaire, Prise de raccord femelle
[Features]
· Allows for centralized or distributed piping for use in different applications.
· Single-action tool-free connection and disconnection.
· Air output in any direction over 360°.
(i)Remarque
- *See the catalog for detailed specs and materials.
- Product images may be representative images. Refer to the catalog for details.
Référence pièce
Vous pouvez trouver ici le numéro
de référence lié au produit recherché.
Piping Module KB Series Air Supply Port, Female Connector Socket Specifications
Female Connector Socket external appearance
Female Connector Socket dimensional drawing
Size
(Units: mm)
| Model | T Connection threads | H Hex size | D | L1 | L2 | A | Weight g |
|---|---|---|---|---|---|---|---|
| KBS1-R1 | Rc 1/8 | 14 | 13.6 | 28.0 | 11.0 | 25.0 | 17.8 |
| KBS2-R2 | Rc 1/4 | 17 | 17.6 | 33.5 | 14.0 | 30.0 | 28.5 |
| KBS3-R3 | Rc 3/8 | 19 | 25.2 | 38.5 | 17.0 | 34.5 | 33.8 |
| KBS4-R4 | Rc1/2 | 24 | 27.0 | 39.0 | 20.0 | 35.0 | 57.1 |
Specifications
| Usable fluids | Air | |
|---|---|---|
| Operating pressure range Note: | -100 kPa to 1 MPa | |
| Guaranteed pressure resistance | 3 MPa | |
| Ambient temperature and working fluid temperature | -5 to 60℃ (no freezing) | |
| Thread | Mounting section | JIS B0203 (tapered thread for pipes/tubes) |
| JIS B 0205 (metric coarse thread) | ||
| Nut section | JIS B0205 (metric fine thread) | |
| Screw section seal (standard) | Includes sealing agent | |
| Copper-free specification (standard) | All brass parts have electroless nickel plating | |
Note: Do not use with a leak tester or for other forms of vacuum retention as they are not guaranteed for zero leakage.
Main Component Materials
| Body | C3604, PBT, POM |
|---|---|
| Stud | POM |
| Lock ring | POM |
| Spring | SUS304 |
| Spring guide | POM |
| Stopper | POM |
| Thread | C3604 |
| Guide | SUS304, PBT, C3604 |
| Collet, release button | POM |
| Seal, O-ring | NBR |
| Chuck | SUS304 |
Attachment
Attachment method 1: Align the arrows so that they match each other
Attachment method 2: Do not touch the lock ring
Removal method
Removal method 1: Rotate the lock ring 90°. Hold in this position.
Removal method 2: Do not touch the lock ring.
Piping Module Removal/Attachment Structural Drawing
Piping module removal/attachment structural drawing
1. Align the arrows on the piping module's "male side "with those on the "female side "and insert.
2. Insert the lock ring so that the "lock touches the "guide section "on the female side "and falls in the direction shown by the arrow (inside).
3. Push in further so that the lock ring section "passes over "the guide "on the female side "and snaps "into the "window section. The protruding section "on the male side "snaps into the groove on the "female side, "acting as a detent.
To remove, rotate the lock ring 90° to release the lock ring section "from the "window "on the "female side. Pull the female side and "male side "piping modules "to "remove.
*See the manufacturer's catalog for specifications other than the above.
Loading...
Informations de base
| Type | Simple effet / vis | Type à raccord | Douille et réduction | Fluide applicable | Air |
|---|---|---|---|---|---|
| Matériau du corps principal | EN CW614N équiv. + PBT + POM | Application | Standard/Mini | Matériau du filetage | EN CW614N équiv. |
| Packing, Material of O-Ring | EPDM (revêtement en fluorine) | Douilles, réducteurs | Douille de connecteur |
Configurer
Propriétés de base
-
Connection Type
- RC
- Rc
-
Connection screw
- 1/2
- 1/4
- 1/8
- 3/8
-
Type
- KBS
-
Filtrer par type de données CAO
- 2D
- 3D
Filtrer par jours d'expédition standard
-
- Tous les articles
- 4 jours ou moins
- 26 jours ou moins
Propriétés optionnelles
- Les spécifications et les dimensions de certaines pièces peuvent ne pas être intégralement indiquées. Pour plus de détails, reportez-vous aux catalogues des fabricants .
Assistance technique
Mode de paiement
Fabrication à la demande
Certificats
Copyright © MISUMI Corporation All Rights Reserved.